[PATCH RFC] mtd: spi-nor: unset quad_enable if SFDP doesn't specify it

[Heiko Thiery]

Hi Michael,

Am Di., 1. März 2022 um 13:49 Uhr schrieb Michael Walle <michael at walle.cc>:
>
> For flashes which use the first JESD216 revision, we don't know
> which enable method for quad mode we can use. The default one in
> spi_nor_init_default_params() is wrong for at least the Macronix
> MX25L12835F, thus clear the enable method. Flashes with such an
> SFDP revision will have to use a flash (and SFDP revision)
> specific fixup.
>
> Signed-off-by: Michael Walle <michael at walle.cc>

Tested-by: Heiko Thiery <heiko.thiery at gmail.com>

> ---
> Please note, completely, untested. Heiko, could you test this without
> having the second series from Tudor applied? Then you should have at
> least a working flash without quad mode.

I removed the second series and applied yours. With that it works.


--
Heiko

>
>  drivers/mtd/spi-nor/sfdp.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
> index a5211543d30d..c23e85274ff2 100644
> --- a/drivers/mtd/spi-nor/sfdp.c
> +++ b/drivers/mtd/spi-nor/sfdp.c
> @@ -549,6 +549,14 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
>         map->uniform_erase_type = map->uniform_region.offset &
>                                   SNOR_ERASE_TYPE_MASK;
>
> +       /*
> +        * The first JESD216 revision doesn't specify a method to enable
> +        * quad mode. spi_nor_init_default_params() will set a legacy
> +        * default method to enable quad mode. We have to disable it
> +        * again.
> +        */
> +       params->quad_enable = NULL;
> +
>         /* Stop here if not JESD216 rev A or later. */
>         if (bfpt_header->length == BFPT_DWORD_MAX_JESD216)
>                 return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt);
> @@ -562,7 +570,6 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
>         /* Quad Enable Requirements. */
>         switch (bfpt.dwords[BFPT_DWORD(15)] & BFPT_DWORD15_QER_MASK) {
>         case BFPT_DWORD15_QER_NONE:
> -               params->quad_enable = NULL;
>                 break;
>
>         case BFPT_DWORD15_QER_SR2_BIT1_BUGGY:
> --
> 2.30.2
>