[PATCH 3/4] mtd: spi-nor: sfdp: Get the 8D-8D-8D byte order from BFPT

[Pratyush Yadav]

On 18/02/22 04:58PM, Tudor Ambarus wrote:
> Parse BFPT in order to retrieve the byte order in 8D-8D-8D mode.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus at microchip.com>

Reviewed-by: Pratyush Yadav <p.yadav at ti.com>

> ---
>  drivers/mtd/spi-nor/sfdp.c | 3 +++
>  drivers/mtd/spi-nor/sfdp.h | 1 +
>  2 files changed, 4 insertions(+)
> 
> diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
> index a5211543d30d..551edbb039f0 100644
> --- a/drivers/mtd/spi-nor/sfdp.c
> +++ b/drivers/mtd/spi-nor/sfdp.c
> @@ -633,6 +633,9 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
>  		return -EOPNOTSUPP;
>  	}
>  
> +	if (bfpt.dwords[BFPT_DWORD(18)] & BFPT_DWORD18_BYTE_ORDER_SWAPPED)
> +		nor->flags |= SNOR_F_DTR_BSWAP16;
> +
>  	return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt);
>  }
>  
> diff --git a/drivers/mtd/spi-nor/sfdp.h b/drivers/mtd/spi-nor/sfdp.h
> index bbf80d2990ab..9a834ea31c16 100644
> --- a/drivers/mtd/spi-nor/sfdp.h
> +++ b/drivers/mtd/spi-nor/sfdp.h
> @@ -97,6 +97,7 @@ struct sfdp_bfpt {
>  #define BFPT_DWORD18_CMD_EXT_INV		(0x1UL << 29) /* Invert */
>  #define BFPT_DWORD18_CMD_EXT_RES		(0x2UL << 29) /* Reserved */
>  #define BFPT_DWORD18_CMD_EXT_16B		(0x3UL << 29) /* 16-bit opcode */
> +#define BFPT_DWORD18_BYTE_ORDER_SWAPPED		BIT(31)
>  
>  struct sfdp_parameter_header {
>  	u8		id_lsb;
> -- 
> 2.25.1
> 

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.