[PATCH 4/4] mtd: spi-nor: core: Introduce SPI_NOR_DTR_BSWAP16 no_sfdp_flag

Pratyush Yadav p.yadav at ti.com
Wed Mar 2 04:30:38 PST 2022


On 18/02/22 04:59PM, Tudor Ambarus wrote:
> Introduce SPI_NOR_DTR_BSWAP16 flag for flashes that don't define the
> mandatory BFPT table. When set it indicates that the byte order of 16-bit
> words is swapped when read in 8D-8D-8D mode compared to 1-1-1 mode.

Is there any flash that currently needs this flag but does not define 
BFPT? If there is no user, let's not add it. It can always be added 
later.

> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus at microchip.com>
> ---
>  drivers/mtd/spi-nor/core.c | 5 ++++-
>  drivers/mtd/spi-nor/core.h | 5 ++++-
>  2 files changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 453d8c54d062..c3128a8e1544 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2572,7 +2572,7 @@ static void spi_nor_no_sfdp_init_params(struct spi_nor *nor)
>  {
>  	struct spi_nor_flash_parameter *params = nor->params;
>  	struct spi_nor_erase_map *map = &params->erase_map;
> -	const u8 no_sfdp_flags = nor->info->no_sfdp_flags;
> +	const u16 no_sfdp_flags = nor->info->no_sfdp_flags;
>  	u8 i, erase_mask;
>  
>  	if (no_sfdp_flags & SPI_NOR_DUAL_READ) {
> @@ -2613,6 +2613,9 @@ static void spi_nor_no_sfdp_init_params(struct spi_nor *nor)
>  					SPINOR_OP_PP, SNOR_PROTO_8_8_8_DTR);
>  	}
>  
> +	if (no_sfdp_flags & SPI_NOR_DTR_BSWAP16)
> +		nor->flags |= SNOR_F_DTR_BSWAP16;
> +
>  	/*
>  	 * Sector Erase settings. Sort Erase Types in ascending order, with the
>  	 * smallest erase size starting at BIT(0).
> diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
> index 7c077d41c335..1cb887437193 100644
> --- a/drivers/mtd/spi-nor/core.h
> +++ b/drivers/mtd/spi-nor/core.h
> @@ -362,6 +362,8 @@ struct spi_nor_fixups {
>   *   SPI_NOR_OCTAL_READ:      flash supports Octal Read.
>   *   SPI_NOR_OCTAL_DTR_READ:  flash supports octal DTR Read.
>   *   SPI_NOR_OCTAL_DTR_PP:    flash supports Octal DTR Page Program.
> + *   SPI_NOR_DTR_BSWAP16:     the byte order of 16-bit words is swapped when
> + *			      read or written in DTR mode compared to STR mode.
>   *
>   * @fixup_flags:    flags that indicate support that can be discovered via SFDP
>   *                  ideally, but can not be discovered for this particular flash
> @@ -404,7 +406,7 @@ struct flash_info {
>  #define USE_FSR				BIT(10)
>  #define SPI_NOR_XSR_RDY			BIT(11)
>  
> -	u8 no_sfdp_flags;
> +	u16 no_sfdp_flags;
>  #define SPI_NOR_SKIP_SFDP		BIT(0)
>  #define SECT_4K				BIT(1)
>  #define SECT_4K_PMC			BIT(2)
> @@ -413,6 +415,7 @@ struct flash_info {
>  #define SPI_NOR_OCTAL_READ		BIT(5)
>  #define SPI_NOR_OCTAL_DTR_READ		BIT(6)
>  #define SPI_NOR_OCTAL_DTR_PP		BIT(7)
> +#define SPI_NOR_DTR_BSWAP16		BIT(8)
>  
>  	u8 fixup_flags;
>  #define SPI_NOR_4B_OPCODES		BIT(0)
> -- 
> 2.25.1
> 

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.



More information about the linux-mtd mailing list