[PATCH v7 0/4] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N

[Ahmad Fatoum]

Hello Tokunori-san,

On 23.03.22 18:04, Tokunori Ikegami wrote:
> Since commit dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to
> check correct value") buffered writes fail on S29GL064N. This is
> because, on S29GL064N, reads return 0xFF at the end of DQ polling for
> write completion, where as, chip_good() check expects actual data
> written to the last location to be returned post DQ polling completion.
> Fix is to revert to using chip_good() for S29GL064N which only checks
> for DQ lines to settle down to determine write completion.
> 
> Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value")
> Signed-off-by: Tokunori Ikegami <ikegami.t at gmail.com>
> Cc: stable at vger.kernel.org
> Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/

For this series,

Tested-by: Ahmad Fatoum <a.fatoum at pengutronix.de>

Thanks a lot for taking care of this. Could you keep me Cc'd
on future revisions? Convention is via a Reported-by tag
in the regression fix.

Cheers,
Ahmad


> 
> Tokunori Ikegami (4):
>   mtd: cfi_cmdset_0002: Move and rename
>     chip_check/chip_ready/chip_good_for_write
>   mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N
>   mtd: cfi_cmdset_0002: Add S29GL064N ID definition
>   mtd: cfi_cmdset_0002: Rename chip_ready variables
> 
>  drivers/mtd/chips/cfi_cmdset_0002.c | 112 ++++++++++++++--------------
>  include/linux/mtd/cfi.h             |   1 +
>  2 files changed, 55 insertions(+), 58 deletions(-)
> 


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |