October 2026 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Thu Oct 1 00:11:19 PDT 2026
Ending: Fri Oct 30 09:03:17 PDT 2026
Messages: 335

• [PATCH 0/2] FIT: Do not hash image data twice   Sascha Hauer
  • [PATCH 1/2] bootm: fit: open FIT images only once per loadable   Sascha Hauer
  • [PATCH 2/2] FIT: do not cache uncompressed data   Sascha Hauer
  • [PATCH 0/2] FIT: Do not hash image data twice   Sascha Hauer
• [PATCH] ARM/RISC-V: pbl.lds: drop ALIGN before _text and assert entry at start   Marco Felsch
  • [PATCH] ARM/RISC-V: pbl.lds: drop ALIGN before _text and assert entry at start   Sascha Hauer
• [PATCH 0/3] Rockchip: early boot time optimization   Sascha Hauer
  • [PATCH 1/3] ARM: rockchip: move to the load address with the MMU enabled   Sascha Hauer
  • [PATCH 2/3] ARM: rockchip: boards: leave moving to the load address to atf.c   Sascha Hauer
    • [PATCH 2/3] ARM: rockchip: boards: leave moving to the load address to atf.c   Ahmad Fatoum
      • [PATCH 2/3] ARM: rockchip: boards: leave moving to the load address to atf.c   Sascha Hauer
  • [PATCH 3/3] ARM: rockchip: pack the device tree passed to TF-A and OP-TEE   Sascha Hauer
    • [PATCH 3/3] ARM: rockchip: pack the device tree passed to TF-A and OP-TEE   Ahmad Fatoum
      • [PATCH 3/3] ARM: rockchip: pack the device tree passed to TF-A and OP-TEE   Sascha Hauer
  • [PATCH 0/3] Rockchip: early boot time optimization   Sascha Hauer
• [PATCH] ARM: dts: imx6: phycore: Add phy-reset-post-delay   Florijan Plohl
  • [PATCH] ARM: dts: imx6: phycore: Add phy-reset-post-delay   Sascha Hauer
• [PATCH] ARM: boards: phytec-som-imx6: Add ADIN1300 PHY fixup   Florijan Plohl
  • [PATCH] ARM: boards: phytec-som-imx6: Add ADIN1300 PHY fixup   Sascha Hauer
• [PATCH] ARM: dts: imx6: phycore: Fix pin settings for ADIN1300 PHY   Florijan Plohl
  • [PATCH] ARM: dts: imx6: phycore: Fix pin settings for ADIN1300 PHY   Sascha Hauer
  • [PATCH] ARM: dts: imx6: phycore: Fix pin settings for ADIN1300 PHY   Sascha Hauer
• [PATCH v2 0/3] PBL: enable hash functions for Vendor Authorized Boot   Sascha Hauer
• [PATCH 1/4] clk: imx: pll14xx: use register defines consistently   Sascha Hauer
• [PATCH] treewide: drop PRE_IMAGE linker script hook   Sascha Hauer
• [PATCH v2 0/3] FIT: parse and use the cmdline property of FIT images   Sascha Hauer
• [PATCH] ARM: i.MX8MP: variscite-dt8mcustomboard: use i.MX8MP early clock init   Sascha Hauer
• [PATCH v2 next 0/5] dm: lvm: Initial Logical Volume Management support   Sascha Hauer
• [PATCH] ARM: lib32: bootm: always pass a device tree to barebox images   Sascha Hauer
• [PATCH] x86: efi: fix objcopy flags for barebox.efi   Lucas Stach
  • [PATCH] x86: efi: fix objcopy flags for barebox.efi   Sascha Hauer
• [PATCH v2 3/3] FIT: add cmdline to whitelist of non-hashed properties   Ahmad Fatoum
• [PATCH 1/4] bootm: define LINUX_BOOTARGS_BOOTM_EARLY/LATE in <bootm.h>   Ahmad Fatoum
  • [PATCH 2/4] amend! FIT: add cmdline to whitelist of non-hashed properties   Ahmad Fatoum
  • [PATCH 3/4] amend! bootm: add fitimage command line to bootargs   Ahmad Fatoum
  • [PATCH 4/4] test: py: add test for fit cmdline parameter order   Ahmad Fatoum
  • [PATCH 1/4] bootm: define LINUX_BOOTARGS_BOOTM_EARLY/LATE in <bootm.h>   Sascha Hauer
• [PATCH master 1/5] clk: imx: pll14xx: enable PLL output in clk_pll1416x_early_set_rate()   Ahmad Fatoum
  • [PATCH master 2/5] ARM: i.MX8MM/8MN: clock NOC from SYS_PLL3 in early clock init   Ahmad Fatoum
  • [PATCH master 3/5] ARM: i.MX8M: feed A53 cores from ARM PLL via CORE_SEL_CFG in early clock init   Ahmad Fatoum
  • [PATCH master 1/5] clk: imx: pll14xx: enable PLL output in clk_pll1416x_early_set_rate()   Sascha Hauer
• [PATCH master 4/5] ARM: i.MX8M: source dram_apb from sys_pll2_200m in early clock init   Ahmad Fatoum
• [PATCH master 5/5] ARM: i.MX8M: order early clock init like U-Boot   Ahmad Fatoum
• [PATCH 0/6] fs: ubootvarfs: harden parser   Ahmad Fatoum
  • [PATCH 1/6] fs: skip directory entries whose name does not fit struct dirent   Ahmad Fatoum
  • [PATCH 4/6] fs: ubootvarfs: do not form pointers past the end of the environment   Ahmad Fatoum
  • [PATCH 5/6] fs: ubootvarfs: reject variable names containing '='   Ahmad Fatoum
  • [PATCH 6/6] fs: ubootvarfs: handle removal of variables that are still open   Ahmad Fatoum
  • [PATCH 0/6] fs: ubootvarfs: harden parser   Sascha Hauer
• [PATCH 2/6] fs: reject negative lengths in ftruncate()   Ahmad Fatoum
• [PATCH 3/6] fs: ubootvarfs: range-check the new size in truncate   Ahmad Fatoum
• [PATCH] sandbox: hostfile: keep "syscon" compatible on the stickypage   Ahmad Fatoum
  • [PATCH] sandbox: hostfile: keep "syscon" compatible on the stickypage   Sascha Hauer
• [PATCH v1 00/14] efi: loader: boot Authenticode-signed UKIs   Johannes Schneider
  • [PATCH v1 01/14] mfd: hgs-efi: do not claim the name of the EFI loader's device   Johannes Schneider
  • [PATCH v1 02/14] efi: loader: file: report EFI_UNSUPPORTED for volumes without a filesystem   Johannes Schneider
  • [PATCH v1 03/14] efi: loader: bootm: free the devicetree after installing it   Johannes Schneider
  • [PATCH v1 04/14] efi: loader: provide EFI_DT_FIXUP_PROTOCOL   Johannes Schneider
  • [PATCH v1 05/14] efi: loader: pe: add helpers for the image size and a named section   Johannes Schneider
  • [PATCH v1 06/14] efi: loader: bootm: load only the PE image, not the whole file   Johannes Schneider
  • [PATCH v1 07/14] efi: loader: bootm: pass the kernel command line to UKIs   Johannes Schneider
    • [PATCH v1 07/14] efi: loader: bootm: pass the kernel command line to UKIs   Ahmad Fatoum
  • [PATCH v1 08/14] efi: loader: verify Authenticode signatures against built-in keys   Johannes Schneider
    • [PATCH v1 08/14] efi: loader: verify Authenticode signatures against built-in keys   Ahmad Fatoum
      • [PATCH v1 08/14] efi: loader: verify Authenticode signatures against built-in keys   SCHNEIDER Johannes
      • [PATCH v1 08/14] efi: loader: verify Authenticode signatures against built-in keys   SCHNEIDER Johannes
  • [PATCH v1 09/14] efi: loader: authenticode: add a fuzz test   Johannes Schneider
  • [PATCH v1 10/14] efi: loader: authenticate LoadImage() images when signing is forced   Johannes Schneider
  • [PATCH v1 11/14] efi: loader: file: expose no filesystem when signed images are forced   Johannes Schneider
  • [PATCH v1 12/14] bootm: efi: boot signed EFI images when signed images are forced   Johannes Schneider
  • [PATCH v1 13/14] efi: loader: bootm: install a devicetree for matching UKI devicetrees   Johannes Schneider
  • [PATCH v1 14/14] efi: loader: bootm: apply overlays carried by a UKI   Johannes Schneider
• [PATCH v2] ARM: boards: phytec-som-imx6: Add ADIN1300 PHY fixup   Florijan Plohl
  • [PATCH v2] ARM: boards: phytec-som-imx6: Add ADIN1300 PHY fixup   Sascha Hauer
• [RFC PATCH 0/2] defaultenv: board defaultenv now overrides CONFIG_DEFAULT_ENVIRONMENT_PATH   Florijan Plohl
  • [RFC PATCH 2/2] ARM: boards: phytec-som-imx6: re-apply BSP environment after board defaultenv   Florijan Plohl
  • [RFC PATCH 0/2] defaultenv: board defaultenv now overrides CONFIG_DEFAULT_ENVIRONMENT_PATH   Ahmad Fatoum
• [RFC PATCH 1/2] defaultenv: add defaultenv_append_external() to re-apply BSP environment   Florijan Plohl
• [PATCH 00/11] arm: socfpga: agilex5: add xload support for bl33 to FSBL   Michael Tretter
  • [PATCH 03/11] mtd: spi-nor: cadence: extract common part for use in PBL   Michael Tretter
  • [PATCH 05/11] arm: socfpga: agilex5: add bl33 xload support   Michael Tretter
  • [PATCH 06/11] arm: socfpga: agilex5: separate load and start of bl33   Michael Tretter
  • [PATCH 07/11] arm: socfpga: agilex5: enable xload for bl33   Michael Tretter
  • [PATCH 08/11] arm: socfpga: agilex5: initialize QSPI flash in PBL   Michael Tretter
    • [PATCH 08/11] arm: socfpga: agilex5: initialize QSPI flash in PBL   Michael Tretter
  • [PATCH 09/11] arm: socfpga: agilex5: add agilex5_barebox_entry_xload   Michael Tretter
  • [PATCH 10/11] arm: socfpga: axe5-eagle: move lowlevel init to separate function   Michael Tretter
  • [PATCH 11/11] arm: socfpga: axe5-eagle: build FSBL without piggy data   Michael Tretter
    • [PATCH] fixup! arm: socfpga: axe5-eagle: build FSBL without piggy data   Michael Tretter
      • (subset) [PATCH] fixup! arm: socfpga: axe5-eagle: build FSBL without piggy data   Sascha Hauer
  • [PATCH 00/11] arm: socfpga: agilex5: add xload support for bl33 to FSBL   Sascha Hauer
  • [PATCH 00/11] arm: socfpga: agilex5: add xload support for bl33 to FSBL   Sascha Hauer
• [PATCH 01/11] mtd: spi-nor: drop requirement for device field   Michael Tretter
• [PATCH 02/11] mtd: spi-nor: enable module in PBL   Michael Tretter
  • [PATCH] fixup! mtd: spi-nor: enable module in PBL   Sascha Hauer
    • [PATCH] fixup! mtd: spi-nor: enable module in PBL   Sascha Hauer
• [PATCH 04/11] mtd: spi-nor: cadence: add a PBL driver   Michael Tretter
• [PATCH 0/2] arm: socfpga: agilex5: remove custom GPIO toggle   Michael Tretter
  • [PATCH 0/2] arm: socfpga: agilex5: remove custom GPIO toggle   Sascha Hauer
• [PATCH 1/2] arm: socfpga: agilex5: select GPIOLIB   Michael Tretter
• [PATCH 2/2] arm: socfpga: axe5-eagle: drop hard-coded PHY reset in board code   Michael Tretter
• [PATCH 0/2] of: overlay: of_overlay_fix_path: allow symbols without __overlay__   Stefan Kerkmann
  • [PATCH 1/2] of: overlay: of_overlay_fix_path: allow symbols without __overlay__   Stefan Kerkmann
  • [PATCH 0/2] of: overlay: of_overlay_fix_path: allow symbols without __overlay__   Stefan Kerkmann
• [PATCH 2/2] of: overlay: fix_path/apply_symbols: add more debugging calls   Stefan Kerkmann
• [PATCH master 1/3] ARM: rockchip: rk3568-qnap-ts433eu: re-enable combphy0, disable sata2   Ahmad Fatoum
  • [PATCH master 3/3] of: base: use default bus match table when populating /firmware   Ahmad Fatoum
  • [PATCH master 1/3] ARM: rockchip: rk3568-qnap-ts433eu: re-enable combphy0, disable sata2   Sascha Hauer
• [PATCH master 2/3] ARM: rpi: look up emmc2bus by alias for dma-ranges fixup   Ahmad Fatoum
• [PATCH v2 00/10] efi: payload: allow passing arguments to UKIs   Ahmad Fatoum
  • [PATCH v2 01/10] commands: devlookup: honour global.bootm.root_param for -k   Ahmad Fatoum
    • [PATCH v2 01/10] commands: devlookup: honour global.bootm.root_param for -k   Marco Felsch
      • [PATCH v2 01/10] commands: devlookup: honour global.bootm.root_param for -k   Ahmad Fatoum
  • [PATCH v2 02/10] common: bootargs: don't leave linux_bootargs dangling after free   Ahmad Fatoum
    • [PATCH v2 02/10] common: bootargs: don't leave linux_bootargs dangling after free   Marco Felsch
  • [PATCH v2 03/10] common: bootargs: drop legacy bootargs fallback with FLEXIBLE_BOOTARGS   Ahmad Fatoum
    • [PATCH v2 03/10] common: bootargs: drop legacy bootargs fallback with FLEXIBLE_BOOTARGS   Marco Felsch
  • [PATCH v2 04/10] globalvar: skip empty variables in globalvar_get_match()   Ahmad Fatoum
    • [PATCH v2 04/10] globalvar: skip empty variables in globalvar_get_match()   Marco Felsch
  • [PATCH v2 05/10] efi: payload: honour bootm dryrun in the EFI application handler   Ahmad Fatoum
  • [PATCH v2 06/10] efi: payload: always shutdown barebox when booting   Ahmad Fatoum
    • [PATCH v2 06/10] efi: payload: always shutdown barebox when booting   Marco Felsch
      • [PATCH v2 06/10] efi: payload: always shutdown barebox when booting   Ahmad Fatoum
  • [PATCH v2 07/10] efi: payload: pass shell arguments as load options to executed images   Ahmad Fatoum
    • [PATCH v2 07/10] efi: payload: pass shell arguments as load options to executed images   Marco Felsch
      • [PATCH v2 07/10] efi: payload: pass shell arguments as load options to executed images   Ahmad Fatoum
      • [PATCH v2 07/10] efi: payload: pass shell arguments as load options to executed images   Marco Felsch
  • [PATCH v2 08/10] efi: add global.efi.bootargs for bootm'd EFI applications   Ahmad Fatoum
    • [PATCH v2 08/10] efi: add global.efi.bootargs for bootm'd EFI applications   Marco Felsch
      • [PATCH v2 08/10] efi: add global.efi.bootargs for bootm'd EFI applications   Ahmad Fatoum
  • [PATCH v2 09/10] Documentation: efi: describe load options handling   Ahmad Fatoum
    • [PATCH v2 09/10] Documentation: efi: describe load options handling   Marco Felsch
      • [PATCH v2 09/10] Documentation: efi: describe load options handling   Ahmad Fatoum
      • [PATCH v2 09/10] Documentation: efi: describe load options handling   Marco Felsch
      • [PATCH v2 09/10] Documentation: efi: describe load options handling   Ahmad Fatoum
  • [PATCH v2 10/10] test: py: efiloader: check global.efi.bootargs reaches the kernel   Ahmad Fatoum
• [PATCH v2 0/4] efi: payload: allow extension via fragments   Ahmad Fatoum
  • [PATCH v2 2/4] kbuild: dtc: introduce empty fallback device tree   Ahmad Fatoum
  • [PATCH v2 0/4] efi: payload: allow extension via fragments   Sascha Hauer
• [PATCH v2 1/4] efi: payload: ignore ESP state.dtb if device tree is populated   Ahmad Fatoum
• [PATCH v2 3/4] efi: payload: export device tree in barebox-dtb EFI variable   Ahmad Fatoum
• [PATCH v2 4/4] Documentation: efi: describe device tree handling   Ahmad Fatoum
• [PATCH master 1/2] Documentation: migration-guides: add heading for v2026.09.0   Ahmad Fatoum
  • [PATCH master 2/2] Documentation: migration-guides: turn migration-master into directory   Ahmad Fatoum
  • [PATCH master 1/2] Documentation: migration-guides: add heading for v2026.09.0   Sascha Hauer
  • [PATCH master 1/2] Documentation: migration-guides: add heading for v2026.09.0   Sascha Hauer
• [PATCH master 1/2] defaultenv: bin/devboot: fix typo in final exit   Ahmad Fatoum
  • [PATCH master 2/2] defaultenv: devboot: use rsinit.bind_modules to bind mount modules   Ahmad Fatoum
  • [PATCH master 1/2] defaultenv: bin/devboot: fix typo in final exit   Sascha Hauer
• [PATCH next] Documentation: migration-guides: turn migration-master into directory   Ahmad Fatoum
  • [PATCH next] Documentation: migration-guides: turn migration-master into directory   Sascha Hauer
• [PATCH 1/2] Documentation: devicetree: document overlays in a FIT image   Ahmad Fatoum
  • [PATCH 2/2] test: py: add test for FIT images in global.of.overlay.path   Ahmad Fatoum
  • [PATCH 1/2] Documentation: devicetree: document overlays in a FIT image   Sascha Hauer
• [PATCH master] ARM: zynq: reduce barebox-avnet-zedboard.img size by 21K   Ahmad Fatoum
• [PATCH master v2] ARM: zynq: reduce barebox-avnet-zedboard.img size by 21K   Ahmad Fatoum
  • [PATCH master v2] ARM: zynq: reduce barebox-avnet-zedboard.img size by 21K   Sascha Hauer
• [PATCH] images: remove unused FIT.ITS rule   Ahmad Fatoum
  • [PATCH] images: remove unused FIT.ITS rule   Sascha Hauer
• [PATCH] sandbox: console: only look for ^\q on consoles used for input   Ahmad Fatoum
• [PATCH] blspec: allow devicetree-overlay to be specified multiple times   Ahmad Fatoum
  • [PATCH] blspec: allow devicetree-overlay to be specified multiple times   Sascha Hauer
• [PATCH] nvmem: core: add nvmem_cell_nbits()   Ahmad Fatoum
  • [PATCH] nvmem: core: add nvmem_cell_nbits()   Sascha Hauer
• [PATCH] fs: efivarfs: skip variables whose name does not fit struct dirent   Ahmad Fatoum
  • [PATCH] fs: efivarfs: skip variables whose name does not fit struct dirent   Sascha Hauer
• [PATCH] commands: truncate: report errors from ftruncate()   Ahmad Fatoum
  • [PATCH] commands: truncate: report errors from ftruncate()   Sascha Hauer
• [PATCH] of: reject alias values that are not NUL-terminated   Ahmad Fatoum
  • [PATCH] of: reject alias values that are not NUL-terminated   Sascha Hauer
• [PATCH] ubootvar: reject copies too small for their header   Ahmad Fatoum
  • [PATCH] ubootvar: reject copies too small for their header   Sascha Hauer
• [PATCH] defaultenv: apply external environment after board overlays again   Florijan Plohl
  • [PATCH] defaultenv: apply external environment after board overlays again   Ahmad Fatoum
  • [PATCH] defaultenv: apply external environment after board overlays again   Sascha Hauer
• [PATCH 0/3] dma: make dma_alloc() and dma_zalloc() fallible   Sascha Hauer
  • [PATCH 0/3] dma: make dma_alloc() and dma_zalloc() fallible   Sascha Hauer
• [PATCH 1/3] dma: add dma_xalloc() and dma_xzalloc()   Sascha Hauer
  • [PATCH 1/3] dma: add dma_xalloc() and dma_xzalloc()   Ahmad Fatoum
• [PATCH 2/3] treewide: use dma_xalloc()/dma_xzalloc() where the result isn't checked   Sascha Hauer
  • [PATCH 2/3] treewide: use dma_xalloc()/dma_xzalloc() where the result isn't checked   Ahmad Fatoum
• [PATCH 3/3] dma: let dma_alloc() and dma_zalloc() fail   Sascha Hauer
  • [PATCH 3/3] dma: let dma_alloc() and dma_zalloc() fail   Ahmad Fatoum
• [PATCH] ARM: boards: phytec-som-imx6: Add KSZ9131 PHY support   Florijan Plohl
  • [PATCH] ARM: boards: phytec-som-imx6: Add KSZ9131 PHY support   Sascha Hauer
• [PATCH 1/2] efi: loader: in-place patch the runtime services on ExitBootServices   Ahmad Fatoum
  • [PATCH 2/2] efi: runtime: accept 1:1 mappings in SetVirtualAddressMap   Ahmad Fatoum
    • [PATCH 2/2] efi: runtime: accept 1:1 mappings in SetVirtualAddressMap   Johannes Schauer Marin Rodrigues
  • [PATCH 1/2] efi: loader: in-place patch the runtime services on ExitBootServices   Johannes Schauer Marin Rodrigues
  • [PATCH 1/2] efi: loader: in-place patch the runtime services on ExitBootServices   Sascha Hauer
• [PATCH 0/2] mci: fix read timeouts following SD card writes   Sascha Hauer
  • [PATCH 0/2] mci: fix read timeouts following SD card writes   Sascha Hauer
• [PATCH 1/2] mci: atmel_mci: improve timeout error message   Sascha Hauer
• [PATCH 2/2] mci: wait for card to leave programming state after block writes   Sascha Hauer
• [PATCH v2 0/5] of: overlay: fix __symbols__ handling and add selftest suite   Stefan Kerkmann
  • [PATCH v2 3/5] tests: of_overlay: add selftests skeleton   Stefan Kerkmann
  • [PATCH v2 0/5] of: overlay: fix __symbols__ handling and add selftest suite   Sascha Hauer
• [PATCH v2 1/5] of: overlay: of_overlay_fix_path: skip symbols without __overlay__ node   Stefan Kerkmann
• [PATCH v2 2/5] of: overlay: fix_path/apply_symbols: add more debugging calls   Stefan Kerkmann
• [PATCH v2 4/5] tests: of_overlay: add __symbols__ merging tests   Stefan Kerkmann
• [PATCH v2 5/5] tests: of_overlay: add fragment application tests   Stefan Kerkmann
• [PATCH 0/9] symlink fixes and improvements   Sascha Hauer
  • [PATCH 1/9] fs: ramfs: report symlink target length as st_size   Sascha Hauer
  • [PATCH 2/9] fs: qemu_fw_cfg: report symlink target length as st_size   Sascha Hauer
  • [PATCH 3/9] fs: ramfs: create symlinks with mode 0777   Sascha Hauer
  • [PATCH 4/9] fs: follow absolute symlinks from the root directory   Sascha Hauer
  • [PATCH 5/9] fs: allow trailing symlinks pointing to the root directory   Sascha Hauer
  • [PATCH 6/9] fs: symlink: drop references taken by filename_create()   Sascha Hauer
  • [PATCH 7/9] test: self: dirfd: add tests for absolute symlinks   Sascha Hauer
  • [PATCH 8/9] commands: ln: accept -s option   Sascha Hauer
  • [PATCH 9/9] commands: ln: create link inside DEST if it is a directory   Sascha Hauer
  • [PATCH 0/9] symlink fixes and improvements   Sascha Hauer
• [PATCH master] ARM: dts: imx93-frdm: allow dummy supplies for the PMIC regulators   Ahmad Fatoum
  • [PATCH master] ARM: dts: imx93-frdm: allow dummy supplies for the PMIC regulators   Sascha Hauer
• [PATCH master] ARM: dts: zii-imx8mq-ultra: move i210 below the PCIe root port   Ahmad Fatoum
  • [PATCH master] ARM: dts: zii-imx8mq-ultra: move i210 below the PCIe root port   Sascha Hauer
• v2026.10.0   Sascha Hauer
• [PATCH RESEND] Documentation: migration-guides: turn migration-master into directory   Ahmad Fatoum
  • [PATCH RESEND] Documentation: migration-guides: turn migration-master into directory   Sascha Hauer
• [PATCH 0/2] arm: socfpga: agilex5: add VAB verification for SSBL   Michael Tretter
  • [PATCH 1/2] arm: socfpga: mailbox_s10: add certificate validation   Michael Tretter
  • [PATCH 2/2] arm: socfpga: agilex5: add SSBL verification   Michael Tretter
    • [PATCH 2/2] arm: socfpga: agilex5: add SSBL verification   Sascha Hauer
• [PATCH 0/5] kvx: remove architecture support   clement.leger at linux.dev
  • [PATCH 1/5] drivers: soc: remove KVX support   clement.leger at linux.dev
  • [PATCH 2/5] drivers: clocksource: remove KVX timer   clement.leger at linux.dev
  • [PATCH 3/5] drivers: nvmem: remove KVX OTP support   clement.leger at linux.dev
  • [PATCH 4/5] drivers: watchdog: remove KVX watchdog   clement.leger at linux.dev
  • [PATCH 0/5] kvx: remove architecture support   Sascha Hauer
    • [PATCH 0/5] kvx: remove architecture support   Clement Leger
  • [PATCH 0/5] kvx: remove architecture support   Sascha Hauer
• [PATCH 1/3] crypto: ecc - Fix carry overflow in vli multiplication   Ahmad Fatoum
  • [PATCH 2/3] crypto: ecc - Optimize vli additive operations using compiler builtins   Ahmad Fatoum
  • [PATCH 1/3] crypto: ecc - Fix carry overflow in vli multiplication   Sascha Hauer
• [PATCH 3/3] crypto: ecc - Handle exceptional points in Shamir multiplication   Ahmad Fatoum
• [PATCH] clk: handle get_parent callbacks returning an error   Ahmad Fatoum
  • [PATCH] clk: handle get_parent callbacks returning an error   Sascha Hauer
• [PATCH 1/2] net: designware: wait longer for the MAC reset and report a timeout   Ahmad Fatoum
  • [PATCH 2/2] net: phy: mdio_bus: honour open-drain PHY reset GPIOs   Ahmad Fatoum
  • [PATCH 1/2] net: designware: wait longer for the MAC reset and report a timeout   Sascha Hauer
• [PATCH] usb: onboard-dev: sync with Linux v7.3   Ahmad Fatoum
  • [PATCH] usb: onboard-dev: sync with Linux v7.3   Sascha Hauer
• [PATCH] usb: gadget: fastboot: correctly cap rx_bytes_expected() result   Ahmad Fatoum
  • [PATCH] usb: gadget: fastboot: correctly cap rx_bytes_expected() result   Sascha Hauer
• Mount NFSv4.1/NFSv4.2 filesystem in barebox?   Martin Wege
  • Mount NFSv4.1/NFSv4.2 filesystem in barebox?   Ahmad Fatoum
    • Mount NFSv4.1/NFSv4.2 filesystem in barebox?   Martin Wege
• [PATCH v3 00/12] efi: payload: allow passing arguments to UKIs   Ahmad Fatoum
  • [PATCH v3 05/12] globalvar: skip empty variables in globalvar_get_match()   Ahmad Fatoum
  • [PATCH v3 06/12] efi: payload: honour bootm dryrun in the EFI application handler   Ahmad Fatoum
  • [PATCH v3 07/12] efi: payload: always shutdown barebox when booting   Ahmad Fatoum
  • [PATCH v3 08/12] efi: payload: pass shell arguments as load options to executed images   Ahmad Fatoum
  • [PATCH v3 09/12] efi: add global.efi.bootargs for bootm'd EFI applications   Ahmad Fatoum
  • [PATCH v3 10/12] Documentation: efi: describe load options handling   Ahmad Fatoum
  • [PATCH v3 11/12] test: py: efiloader: check global.efi.bootargs reaches the kernel   Ahmad Fatoum
  • [PATCH v3 12/12] boot: report exit status of failing boot scripts   Ahmad Fatoum
• [PATCH v3 01/12] efi: treat EFI zboot Linux images like other EFI-stubbed kernels   Ahmad Fatoum
• [PATCH v3 02/12] commands: devlookup: honour global.bootm.root_param for -k   Ahmad Fatoum
• [PATCH v3 03/12] common: bootargs: don't leave linux_bootargs dangling after free   Ahmad Fatoum
• [PATCH v3 04/12] common: bootargs: drop legacy bootargs fallback with FLEXIBLE_BOOTARGS   Ahmad Fatoum
• [RFC PATCH 00/17] Switch RISC-V to declarative entry points   Ahmad Fatoum
  • [RFC PATCH 01/17] asm-generic: add registers.h with a pc_inside() helper   Ahmad Fatoum
  • [RFC PATCH 02/17] RISC-V: add call_with_stack() helper   Ahmad Fatoum
  • [RFC PATCH 04/17] PBL: add SoC type declaration and handoff support   Ahmad Fatoum
  • [RFC PATCH 05/17] PBL: introduce board info based entry point framework   Ahmad Fatoum
  • [RFC PATCH 06/17] PBL: describe the console in the board info and report the stage   Ahmad Fatoum
  • [RFC PATCH 07/17] RISC-V: make barebox_riscv_entry() non-naked   Ahmad Fatoum
  • [RFC PATCH 08/17] RISC-V: add PBL heads for the board info stage dispatch   Ahmad Fatoum
  • [RFC PATCH 09/17] RISC-V: board-dt-2nd: migrate to board info entry point   Ahmad Fatoum
  • [RFC PATCH 10/17] RISC-V: hifive: migrate to board info entry point   Ahmad Fatoum
  • [RFC PATCH 11/17] RISC-V: allow relocating the PBL more than once   Ahmad Fatoum
  • [RFC PATCH 12/17] RISC-V: nmon: preserve s1-s3 for the caller   Ahmad Fatoum
  • [RFC PATCH 13/17] RISC-V: beaglev: migrate to board info entry point   Ahmad Fatoum
  • [RFC PATCH 14/17] RISC-V: allwinner-d1: migrate to board info entry point   Ahmad Fatoum
  • [RFC PATCH 15/17] RISC-V: erizo: migrate to board info entry point   Ahmad Fatoum
  • [RFC PATCH 16/17] RISC-V: litex-linux: migrate to board info entry point   Ahmad Fatoum
  • [RFC PATCH 17/17] Documentation: porting: describe the board info entry point   Ahmad Fatoum
• [RFC PATCH 03/17] RISC-V: implement relocate_to_adr_full()   Ahmad Fatoum
• [PATCH 0/4] Linux bootconfig support   Steffen Trumtrar
  • [PATCH 1/4] loadable: add loadable_from_buf()   Steffen Trumtrar
  • [PATCH 2/4] bootm: append a Linux bootconfig to the initrd   Steffen Trumtrar
• [PATCH 3/4] boot: add bootm.bootconfig override   Steffen Trumtrar
• [PATCH 4/4] defaultenv: devboot: add devboot_bootconfig   Steffen Trumtrar
• [PATCH 00/19] driver: add devm_ support   Ahmad Fatoum
  • [PATCH 05/19] talloc: add support for destructors   Ahmad Fatoum
  • [PATCH 06/19] test: self: talloc: add destructor tests   Ahmad Fatoum
  • [PATCH 07/19] talloc: add talloc_run_destructors()   Ahmad Fatoum
  • [PATCH 08/19] mfd: pca9450: don't free device-managed memory in probe error path   Ahmad Fatoum
  • [PATCH 09/19] video: backlight-pwm: allocate brightness levels with devm_kcalloc   Ahmad Fatoum
  • [PATCH 10/19] driver: implement devm_ allocation helpers on top of talloc   Ahmad Fatoum
  • [PATCH 11/19] devres: Provide kmalloc_obj*-style API for devm_kmalloc   Ahmad Fatoum
  • [PATCH 12/19] memory: atmel-ebi: use generic devm_kzalloc()   Ahmad Fatoum
  • [PATCH 13/19] driver: add devm_add_action()   Ahmad Fatoum
  • [PATCH 14/19] test: self: add devm_ selftest   Ahmad Fatoum
  • [PATCH 15/19] driver: add devm_request_mem_resource()   Ahmad Fatoum
  • [PATCH 16/19] driver: make dev_platform_ioremap_resource() device-managed   Ahmad Fatoum
  • [PATCH 17/19] treewide: rename dev_platform_ioremap_resource() to devm_platform_ioremap_resource()   Ahmad Fatoum
  • [PATCH 18/19] driver: make dev_platform_get_and_ioremap_resource() device-managed   Ahmad Fatoum
  • [PATCH 19/19] serial: stm32: request the registers with devm_request_mem_resource()   Ahmad Fatoum
• [PATCH 01/19] commands: devunbind: refuse to unbind devices that were never bound   Ahmad Fatoum
• [PATCH 02/19] commands: devunbind: don't poison the active list entry   Ahmad Fatoum
• [PATCH 03/19] talloc: remove unused talloc_steal() and talloc_steal_children()   Ahmad Fatoum
• [PATCH 04/19] talloc: free children in a loop   Ahmad Fatoum
• [PATCH master 1/2] defaultenv: devboot: name module CPIO after hostname, not arch   Ahmad Fatoum
• [PATCH master 2/2] defaultenv: devboot: adopt same variable names as in /env/boot/net   Ahmad Fatoum
• [PATCH master] video: IPUv3-LDB: fix LVDS serial clock configuration   Ahmad Fatoum
• [PATCH 0/2] Add and use file_exists() helper   Sascha Hauer
  • [PATCH 1/2] libfile: add file_exists() helper   Sascha Hauer
  • [PATCH 2/2] treewise: use file_exists()   Sascha Hauer
• [PATCH 0/4] boot: UAF and double free fixes   Sascha Hauer
  • [PATCH 1/4] boot: fix use-after-free when restoring bootm variables   Sascha Hauer
  • [PATCH 3/4] commands: boot: fix use-after-free of overrides taken from globalvars   Sascha Hauer
• [PATCH 2/4] bootargs: fix double free in linux_bootargs_get()   Sascha Hauer
  • [PATCH 2/4] bootargs: fix double free in linux_bootargs_get()   Ahmad Fatoum
• [PATCH 4/4] commands: boot: list bootm.image in the -o help text again   Sascha Hauer
• [PATCH 00/10] boot: revert boot related globalvars after booting   Sascha Hauer
  • [PATCH 01/10] globalvar: add scopes to snapshot and restore globalvars   Sascha Hauer
  • [PATCH 02/10] bootm: revert globalvar changes in bootm_boot_cleanup()   Sascha Hauer
  • [PATCH 03/10] boot: revert globalvar changes after each boot entry   Sascha Hauer
  • [PATCH 05/10] test: py: add test for reverting globalvars after boot   Sascha Hauer
  • [PATCH 06/10] bootargs: remove unused linux_bootargs_overwrite()   Sascha Hauer
  • [PATCH 07/10] of: add watchdog bootarg directly instead of via a globalvar   Sascha Hauer
  • [PATCH 08/10] boot: drop the dyn infix from the bootentries bootargs variable   Sascha Hauer
  • [PATCH 09/10] defaultenv: don't use global.linux.bootargs.dyn.* in boot entries   Sascha Hauer
  • [PATCH 10/10] Documentation: migration-guides: describe reverting boot globalvars   Sascha Hauer
• [PATCH 04/10] bootchooser: use a globalvar scope for its bootargs   Sascha Hauer
• [PATCH 0/5] boot: implement devboot in C   Sascha Hauer
  • [PATCH 1/5] boot: report the exit status of failing boot scripts   Sascha Hauer
  • [PATCH 2/5] hush: export source_script()   Sascha Hauer
  • [PATCH 3/5] boot: hand overrides on to nested boots and the bootm command   Sascha Hauer
  • [PATCH 4/5] boot: implement devboot in C   Sascha Hauer
  • [PATCH 5/5] sandbox: defconfig: enable boot overrides and devboot   Sascha Hauer
• [PATCH 0/2] watchdog: gpio-wdt: add support for more dt-bindings   Steffen Trumtrar
  • [PATCH 1/2] watchdog: gpio: support always-running   Steffen Trumtrar
  • [PATCH 2/2] watchdog: gpio: support reset-from-wdt gpio   Steffen Trumtrar

Last message date: Fri Oct 30 09:03:17 PDT 2026
Archived on: Fri Oct 30 09:03:50 PDT 2026

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...