[PATCH] ARM: dts: imx6: phycore: Add phy-reset-post-delay

[Sascha Hauer]

On Thu, 01 Oct 2026 12:41:12 +0200, Florijan Plohl wrote:
> Give the ADIN1300 PHY enough time to latch the hardware configuration
> and setup management interface.
> 
> Otherwise the phy_id read as 0x0.
> 
> 

Applied, thanks!

[1/1] ARM: dts: imx6: phycore: Add phy-reset-post-delay
      https://git.pengutronix.de/cgit/barebox/commit/?id=e25c49dcab5d (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>