[PATCH master 1/3] ARM: rockchip: rk3568-qnap-ts433eu: re-enable combphy0, disable sata2

[Sascha Hauer]

On Thu, 15 Oct 2026 10:48:29 +0200, Ahmad Fatoum wrote:
> Linux commit 5a16e131ddba ("arm64: dts: rockchip: Fix the common
> combophy + SATA on QNAP TSx33 devices"), imported with the v7.0-rc1
> dts sync, moved the combphy0 enablement out of the shared
> rk3568-qnap-tsx33.dtsi into the TS-233/TS-433 board files and swapped
> which SATA controller is enabled where: the dtsi now enables sata2
> (+ combphy2) and the boards enable sata1.
> 
> [...]

Applied, thanks!

[1/3] ARM: rockchip: rk3568-qnap-ts433eu: re-enable combphy0, disable sata2
      https://git.pengutronix.de/cgit/barebox/commit/?id=1f05d0099888 (link may not be stable)
[2/3] ARM: rpi: look up emmc2bus by alias for dma-ranges fixup
      https://git.pengutronix.de/cgit/barebox/commit/?id=a52cbcc6f3f7 (link may not be stable)
[3/3] of: base: use default bus match table when populating /firmware
      https://git.pengutronix.de/cgit/barebox/commit/?id=a26873daa824 (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>