[PATCH] ARM: boards: phytec-som-imx6: Add KSZ9131 PHY support

[Sascha Hauer]

On Fri, 16 Oct 2026 10:22:14 +0200, Florijan Plohl wrote:
> The phyCORE-i.MX6 can be populated with a KSZ9131 instead of the
> KSZ9031 PHY. The KSZ9131 driver reads its pad skews from the *-psec
> device tree properties, which the KSZ9031 driver ignores, so add them
> to the PHY node.
> 
> The KSZ9131 additionally needs the 2 ns RXC delay of its internal DLL,
> but with the "rgmii" phy-mode the driver disables it. Changing the
> phy-mode in the device tree is not an option as it would also change the
> RGMII delays of the KSZ9031 and ADIN1300, so add a PHY fixup that
> switches only the KSZ9131 to RGMII-RXID before its config_init runs.
> 
> [...]

Applied, thanks!

[1/1] ARM: boards: phytec-som-imx6: Add KSZ9131 PHY support
      https://git.pengutronix.de/cgit/barebox/commit/?id=e58d2233e610 (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>