[PATCH] ARM: dts: imx6: phycore: Fix pin settings for ADIN1300 PHY

[Sascha Hauer]

On Thu, 01 Oct 2026 12:43:09 +0200, Florijan Plohl wrote:
> Change drive strength:
>  - TXC 		57 Ohm
>  - TD0-3	76 Ohm
>  - TX_CTL	76 Ohm
> 
> Remove pull ups from following pins so the won't interfere with strap
> pin latching of the PHY:
>  - ENET_TX_CLK
>  - RXC
>  - RD0-3
>  - RX_CTL
> 
> [...]

Applied, thanks!

[1/1] ARM: dts: imx6: phycore: Fix pin settings for ADIN1300 PHY
      https://git.pengutronix.de/cgit/barebox/commit/?id=4f8473e272dc (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>