August 2026 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sat Aug 1 05:17:48 PDT 2026
Ending: Fri Aug 21 06:35:46 PDT 2026
Messages: 205

• [PATCH] net: designware_eqs: set upper 32bit address for DMA descriptors to support 64-bit addressing   zhengxiaojun
  • [PATCH] net: designware_eqs: set upper 32bit address for DMA descriptors to support 64-bit addressing   Sascha Hauer
• [PATCH v3 00/15] ARM: mvebu: add Netgear RN102/RN104 support and related drivers   Luca Lauro via B4 Relay
  • [PATCH v3 01/15] ARM: mvebu: add Netgear RN102 support   Luca Lauro via B4 Relay
    • [PATCH v3 01/15] ARM: mvebu: add Netgear RN102 support   Sascha Hauer
      • [PATCH v3 01/15] ARM: mvebu: add Netgear RN102 support   Marco Felsch
  • [PATCH v3 03/15] ARM: mvebu: improve Netgear RN104 support   Luca Lauro via B4 Relay
  • [PATCH v3 05/15] drivers: fan: add fan subsystem, core API and G76x fan controller driver   Luca Lauro via B4 Relay
  • [PATCH v3 06/15] commands: add fan control command   Luca Lauro via B4 Relay
  • [PATCH v3 07/15] usb: ehci: add Marvell EHCI host controller driver   Luca Lauro via B4 Relay
  • [PATCH v3 08/15] usb: ehci: initialize periodic_queue_dma   Luca Lauro via B4 Relay
    • [PATCH v3 08/15] usb: ehci: initialize periodic_queue_dma   Sascha Hauer
  • [PATCH v3 09/15] ata: ahci: add PCI AHCI and Marvell 9170 controller support   Luca Lauro via B4 Relay
    • [PATCH v3 09/15] ata: ahci: add PCI AHCI and Marvell 9170 controller support   Sascha Hauer
  • [PATCH v3 10/15] ata: ahci: fix zero-length DMA handling   Luca Lauro via B4 Relay
  • [PATCH v3 11/15] ata: ahci: add helper for ATA commands without data   Luca Lauro via B4 Relay
  • [PATCH v3 12/15] ata: ahci: improve AHCI port bring-up sequence   Luca Lauro via B4 Relay
  • [PATCH v3 13/15] ata: ahci: add FLUSH EXT and STANDBY IMMEDIATE support during shutdown   Luca Lauro via B4 Relay
    • [PATCH v3 13/15] ata: ahci: add FLUSH EXT and STANDBY IMMEDIATE support during shutdown   Sascha Hauer
  • [PATCH v3 14/15] ata: ahci: add shutdown helpers for AHCI controllers   Luca Lauro via B4 Relay
    • [PATCH v3 14/15] ata: ahci: add shutdown helpers for AHCI controllers   Sascha Hauer
  • [PATCH v3 15/15] ata: ahci: cleanup legacy code and remove unused paths   Luca Lauro via B4 Relay
• [PATCH v3 02/15] ARM: mvebu: enable RN102 in mvebu_defconfig   Luca Lauro via B4 Relay
• [PATCH v3 04/15] ARM: mvebu: rename PUTC_LL to MVEBU_PUTC_LL   Luca Lauro via B4 Relay
• [PATCH] ARM: boards: i.MX93: use kernel dts   Sascha Hauer
• [PATCH] sandbox: enable keytoc in hosttools_defconfig   Sascha Hauer
• [PATCH v2 0/2] PBL: add support for optimized sha256   Sascha Hauer
• [PATCH] input: gpio-keys: initialize the input value with the current gpioval   Sascha Hauer
• barebox,state on the EFI payload: boot-disk binding and state.dtb trust   Ahmad Fatoum
  • barebox,state on the EFI payload: boot-disk binding and state.dtb trust   Raymond | KelvaneOS
    • barebox,state on the EFI payload: boot-disk binding and state.dtb trust   Ahmad Fatoum
    • barebox,state on the EFI payload: boot-disk binding and state.dtb trust   Raymond | KelvaneOS
• [PATCH 1/3] ARM: cpu: suppress arm_early_mmu_cache_invalidate if dcache enabled   Ahmad Fatoum
• [PATCH] fixup! sandbox: enable keytoc in hosttools_defconfig   Ahmad Fatoum
  • [PATCH] fixup! sandbox: enable keytoc in hosttools_defconfig   Sascha Hauer
    • [PATCH] fixup! sandbox: enable keytoc in hosttools_defconfig   Thomas Bonnefille
      • [PATCH] fixup! sandbox: enable keytoc in hosttools_defconfig   Ahmad Fatoum
    • [PATCH] fixup! sandbox: enable keytoc in hosttools_defconfig   Thomas Bonnefille
• [PATCH] fixup! net: designware_eqs: set upper 32bit address for DMA descriptors to support 64-bit addressing   Ahmad Fatoum
  • [PATCH] fixup! net: designware_eqs: set upper 32bit address for DMA descriptors to support 64-bit addressing   Sascha Hauer
• [PATCH] bootm: remove previously deprecated CONFIG_BOOTM_OPTEE   Ahmad Fatoum
  • [PATCH] bootm: remove previously deprecated CONFIG_BOOTM_OPTEE   Ahmad Fatoum
• [PATCH] efi: payload: gracefully handle OOM in initrd allocation   Ahmad Fatoum
  • [PATCH] efi: payload: gracefully handle OOM in initrd allocation   Sascha Hauer
    • [PATCH] efi: payload: gracefully handle OOM in initrd allocation   Ahmad Fatoum
• [PATCH master 1/3] test: kvx: add Labgrid env YAML for generic_defconfig   Ahmad Fatoum
  • [PATCH master 3/3] dma: fix dma_realloc_coherent compile-time error on kvx   Ahmad Fatoum
  • [PATCH master 1/3] test: kvx: add Labgrid env YAML for generic_defconfig   Sascha Hauer
• [PATCH master 2/3] kvx: select DEAD_CODE_DATA_ELIMINATION   Ahmad Fatoum
• [PATCH] net: designware: eqos: keep virtual RX buffer address around   Sascha Hauer
  • [PATCH] net: designware: eqos: keep virtual RX buffer address around   Sascha Hauer
• [PATCH] Documentation: security: mention long term stable release   Ahmad Fatoum
  • [PATCH] Documentation: security: mention long term stable release   Sascha Hauer
• [PATCH v2 0/3] PBL: enable timeouts in read_poll_timeout macros   Stefan Kerkmann
  • [PATCH v2 1/3] ARM64: lib64: pbl: implement get_time_ns and is_timeout   Stefan Kerkmann
  • [PATCH v2 3/3] pbl: introduce HAS_PBL_CLOCKSOURCE marker   Stefan Kerkmann
    • [PATCH v2 3/3] pbl: introduce HAS_PBL_CLOCKSOURCE marker   Sascha Hauer
• [PATCH v2 2/3] ARM: lib32: pbl: implement get_time_ns and is_timeout   Stefan Kerkmann
  • [PATCH v2 2/3] ARM: lib32: pbl: implement get_time_ns and is_timeout   Ahmad Fatoum
    • [PATCH v2 2/3] ARM: lib32: pbl: implement get_time_ns and is_timeout   Sascha Hauer
• RK3588 optee question   Alexander Shiyan
  • RK3588 optee question   Ahmad Fatoum
    • RK3588 optee question   Alexander Shiyan
      • RK3588 optee question   Ahmad Fatoum
      • RK3588 optee question   Alexander Shiyan
  • RK3588 optee question   Sascha Hauer
  • RK3588 optee question   Alexander Shiyan
    • RK3588 optee question   Sascha Hauer
    • RK3588 optee question   Alexander Shiyan
      • RK3588 optee question   Alexander Shiyan
      • RK3588 optee question   Sascha Hauer
      • RK3588 optee question   Alexander Shiyan
      • RK3588 optee question   Ahmad Fatoum
      • RK3588 optee question   Alexander Shiyan
• [PATCH] ci: container: build openssl against musl   Thomas Bonnefille
  • [PATCH] ci: container: build openssl against musl   Ahmad Fatoum
  • [PATCH] ci: container: build openssl against musl   Sascha Hauer
• [PATCH 0/5] Add support for USB-EFI devices in EFI Playload   Fabian Pflug
  • [PATCH 1/5] efi: usb: add header for usb-efi   Fabian Pflug
  • [PATCH 2/5] usb: core: make usb_set_maxpacket_ep public   Fabian Pflug
  • [PATCH 3/5] drivers: usb: host: efi: add efi io driver   Fabian Pflug
    • [PATCH 3/5] drivers: usb: host: efi: add efi io driver   Sascha Hauer
  • [PATCH 4/5] efi: guid: add guid for usb host controller 2   Fabian Pflug
  • [PATCH 5/5] test: x86: add test for uefi usb io   Fabian Pflug
• [PATCH v2 0/9] ARM: add Microchip LAN9696 (LAN969X) SoC and EV23X71A board   Oleksij Rempel
  • [PATCH v2 3/9] clk: add Microchip LAN966X / LAN969X generic clock controller driver   Oleksij Rempel
  • [PATCH v2 4/9] clk: tolerate clocks registered without a name   Oleksij Rempel
  • [PATCH v2 6/9] gpio: add Microchip SGPIO (serial GPIO) driver   Oleksij Rempel
  • [PATCH v2 9/9] ARM: add Novarq Tactical 1000 board   Oleksij Rempel
  • [PATCH v2 0/9] ARM: add Microchip LAN9696 (LAN969X) SoC and EV23X71A board   Sascha Hauer
• [PATCH v2 1/9] ARM: introduce ARCH_MICROCHIP for ARM64 Microchip SoCs   Oleksij Rempel
• [PATCH v2 2/9] serial: atmel: add lan9696 (Microchip LAN969X) support   Oleksij Rempel
• [PATCH v2 5/9] pinctrl: ocelot: port Microsemi/Microchip Ocelot pinctrl from Linux   Oleksij Rempel
• [PATCH v2 7/9] reset: add Microchip sparx5 / LAN969X / LAN966X switch reset driver   Oleksij Rempel
• [PATCH v2 8/9] spi: atmel-quadspi: add Microchip LAN966X / LAN969X support   Oleksij Rempel
• [PATCH v4 00/14] (no cover subject)   Luca Lauro via B4 Relay
  • [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Luca Lauro via B4 Relay
    • [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Sascha Hauer
      • [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Uwe Kleine-König
      • [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Sascha Hauer
      • [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Uwe Kleine-König
      • [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Luca Lauro
      • [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Sascha Hauer
      • [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Luca Lauro
      • [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Luca Lauro
      • [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Sascha Hauer
      • [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Luca Lauro
  • [PATCH v4 02/14] ARM: mvebu: enable RN102 in mvebu_defconfig   Luca Lauro via B4 Relay
  • [PATCH v4 03/14] ARM: mvebu: improve Netgear RN104 support   Luca Lauro via B4 Relay
  • [PATCH v4 04/14] ARM: mvebu: rename PUTC_LL to MVEBU_PUTC_LL   Luca Lauro via B4 Relay
    • [PATCH v4 04/14] ARM: mvebu: rename PUTC_LL to MVEBU_PUTC_LL   Sascha Hauer
      • [PATCH v4 04/14] ARM: mvebu: rename PUTC_LL to MVEBU_PUTC_LL   Luca Lauro
  • [PATCH v4 05/14] drivers: fan: add fan subsystem, core API and G76x fan controller driver   Luca Lauro via B4 Relay
  • [PATCH v4 06/14] commands: add fan control command   Luca Lauro via B4 Relay
  • [PATCH v4 07/14] usb: ehci: add Marvell EHCI host controller driver   Luca Lauro via B4 Relay
  • [PATCH v4 08/14] usb: ehci: initialize periodic_queue_dma   Luca Lauro via B4 Relay
  • [PATCH v4 09/14] ata: ahci: add PCI AHCI and Marvell 9170 controller support   Luca Lauro via B4 Relay
  • [PATCH v4 10/14] ata: ahci: fix zero-length DMA handling   Luca Lauro via B4 Relay
  • [PATCH v4 11/14] ata: ahci: add helper for ATA commands without data   Luca Lauro via B4 Relay
  • [PATCH v4 12/14] ata: ahci: improve AHCI port bring-up sequence   Luca Lauro via B4 Relay
  • [PATCH v4 13/14] ata: ahci: add FLUSH EXT and STANDBY IMMEDIATE support during shutdown   Luca Lauro via B4 Relay
  • [PATCH v4 14/14] ata: ahci: cleanup legacy code and remove unused paths   Luca Lauro via B4 Relay
• [PATCH 00/27] ARM: Add pxa3xx and Raumfeld Speaker support   Sascha Hauer
  • [PATCH 01/27] ARM: pxa: remove PXA25x and PXA27x support   Sascha Hauer
  • [PATCH 02/27] video: remove the PXA framebuffer driver   Sascha Hauer
  • [PATCH 03/27] ARM: cache: drive the XSC3 cache with the ARMv4 functions   Sascha Hauer
  • [PATCH 07/27] clk: pxa: add a device tree clock driver for PXA3xx   Sascha Hauer
  • [PATCH 09/27] mtd: nand: nand_mrvl_nfc: support the nand-controller bindings   Sascha Hauer
  • [PATCH 10/27] mtd: nand: mrvl_nfc: keep the ready latch across a STATUS command   Sascha Hauer
  • [PATCH 11/27] mtd: nand: mrvl_nfc: do not report a command timeout as an error   Sascha Hauer
  • [PATCH 12/27] mci: pxamci: probe from the device tree   Sascha Hauer
  • [PATCH 13/27] serial: pxa: add device tree support   Sascha Hauer
  • [PATCH 14/27] serial: pxa: provide the Linux console name   Sascha Hauer
  • [PATCH 15/27] gpio: pxa: add a driver and switch the architecture to GPIOLIB   Sascha Hauer
  • [PATCH 16/27] ARM: pxa: add DEBUG_LL support   Sascha Hauer
  • [PATCH 17/27] ARM: pxa: let the board select the SoC   Sascha Hauer
  • [PATCH 18/27] ARM: pxa: enable device tree support   Sascha Hauer
  • [PATCH 19/27] scripts: add pxa-image   Sascha Hauer
  • [PATCH 20/27] ARM: pxa: add a NAND first stage loader   Sascha Hauer
  • [PATCH 21/27] filetype: detect PXA3xx NTIM images   Sascha Hauer
  • [PATCH 22/27] ARM: pxa: add a barebox update handler for NAND   Sascha Hauer
  • [PATCH 23/27] clocksource: add a driver for the PXA OS timer and its watchdog   Sascha Hauer
  • [PATCH 24/27] ARM: pxa: move over to MULTIARCH   Sascha Hauer
  • [PATCH 25/27] ARM: pxa: reset straight away and without complaining   Sascha Hauer
  • [PATCH 26/27] ARM: pxa: add Raumfeld Speaker board support   Sascha Hauer
  • [PATCH 27/27] ARM: multi_v5_v6_defconfig: enable PXA support   Sascha Hauer
  • [PATCH 00/27] ARM: Add pxa3xx and Raumfeld Speaker support   Ahmad Fatoum
  • [PATCH 00/27] ARM: Add pxa3xx and Raumfeld Speaker support   Sascha Hauer
• [PATCH 04/27] mci: pxamci: get the clock from the clk API   Sascha Hauer
• [PATCH 05/27] pwm: pxa: get the clock from the clk API   Sascha Hauer
• [PATCH 06/27] serial: pxa: get the clock from the clk API   Sascha Hauer
• [PATCH 08/27] mtd: nand: nand_mrvl_nfc: honour marvell,nand-keep-config   Sascha Hauer
• [PATCH v2 0/5] Add support for USB-EFI devices in EFI Playload   Fabian Pflug
  • [PATCH v2 3/5] drivers: usb: host: efi: add efi io driver   Fabian Pflug
    • [PATCH v2 3/5] drivers: usb: host: efi: add efi io driver   Ahmad Fatoum
• [PATCH v2 1/5] efi: usb: add header for usb-efi   Fabian Pflug
  • [PATCH v2 1/5] efi: usb: add header for usb-efi   Ahmad Fatoum
    • [PATCH v2 1/5] efi: usb: add header for usb-efi   Fabian Pflug
      • [PATCH v2 1/5] efi: usb: add header for usb-efi   Ahmad Fatoum
      • [PATCH v2 1/5] efi: usb: add header for usb-efi   Fabian Pflug
• [PATCH v2 2/5] usb: core: make usb_set_maxpacket_ep public   Fabian Pflug
  • [PATCH v2 2/5] usb: core: make usb_set_maxpacket_ep public   Ahmad Fatoum
• [PATCH v2 4/5] efi: guid: add guid for usb host controller 2   Fabian Pflug
  • [PATCH v2 4/5] efi: guid: add guid for usb host controller 2   Ahmad Fatoum
• [PATCH v2 5/5] test: x86: add test for uefi usb io   Fabian Pflug
  • [PATCH v2 5/5] test: x86: add test for uefi usb io   Ahmad Fatoum
• [PATCH v3 0/8] PBL: enable timeouts in read_poll_timeout macros   Stefan Kerkmann
  • [PATCH v3 0/8] PBL: enable timeouts in read_poll_timeout macros   Sascha Hauer
• [PATCH v3 1/8] RISC-V: setup_c: avoid clearing BSS twice   Stefan Kerkmann
• [PATCH v3 2/8] ARM/ARM64/RISC-V: pbl: add constructor support   Stefan Kerkmann
  • [PATCH] amend! ARM/ARM64/RISC-V: pbl: add constructor support   Stefan Kerkmann
  • [PATCH v3 2/8] ARM/ARM64/RISC-V: pbl: add constructor support   Sascha Hauer
• [PATCH v3 3/8] clocksource: allow re-init for same clock   Stefan Kerkmann
• [PATCH v3 4/8] drivers: arm_architected_timer: refactor for pbl compatibility   Stefan Kerkmann
  • [PATCH v3 4/8] drivers: arm_architected_timer: refactor for pbl compatibility   Sascha Hauer
    • [PATCH v3 4/8] drivers: arm_architected_timer: refactor for pbl compatibility   Stefan Kerkmann
      • [PATCH v3 4/8] drivers: arm_architected_timer: refactor for pbl compatibility   Sascha Hauer
      • [PATCH v3 4/8] drivers: arm_architected_timer: refactor for pbl compatibility   Stefan Kerkmann
• [PATCH v3 5/8] ARM: layerscape: re-init pbl clocksource   Stefan Kerkmann
  • [PATCH v3 5/8] ARM: layerscape: re-init pbl clocksource   Ahmad Fatoum
  • [PATCH v3 5/8] ARM: layerscape: re-init pbl clocksource   Sascha Hauer
    • [PATCH v3 5/8] ARM: layerscape: re-init pbl clocksource   Stefan Kerkmann
• [PATCH v3 6/8] ARM: socfpga: agilex5: re-init pbl clocksource   Stefan Kerkmann
• [PATCH v3 7/8] ARM64: enable PBL_CLOCKSOURCE compatibility   Stefan Kerkmann
• [PATCH v3 8/8] linux/iopoll: enable polled timeouts for PBL_CLOCKSOURCE   Stefan Kerkmann
• [PATCH] scripts: gdb: fix missing pbl_barebox_break error message   Michael Tretter
  • [PATCH] scripts: gdb: fix missing pbl_barebox_break error message   Sascha Hauer
• iMX ddrphy_utils difference with U-boot   Ahmad Fatoum
  • iMX ddrphy_utils difference with U-boot   Ahmad Fatoum
• [PATCH 0/2] PBL: constructor fixes   Stefan Kerkmann
  • [PATCH 1/2] ARM/ARM64/RISC-V: pbl: guard constructor support   Stefan Kerkmann
  • [PATCH 2/2] ARM64: setup_c: abi safe link register storage   Stefan Kerkmann
  • [PATCH 0/2] PBL: constructor fixes   Ahmad Fatoum
    • [PATCH 0/2] PBL: constructor fixes   Sascha Hauer
      • [PATCH 0/2] PBL: constructor fixes   Stefan Kerkmann
      • [PATCH 0/2] PBL: constructor fixes   Sascha Hauer
      • [PATCH 0/2] PBL: constructor fixes   Stefan Kerkmann
• [PATCH 1/2] clang-format: do not allow short enums on a single line   Ahmad Fatoum
  • [PATCH 2/2] clang-format: align consecutive macros   Ahmad Fatoum
• [PATCH v3 0/5] Add support for USB-EFI devices in EFI Playload   Fabian Pflug
  • [PATCH v3 1/5] efi: usb: add header for usb-efi   Fabian Pflug
  • [PATCH v3 3/5] drivers: usb: host: efi: add efi io driver   Fabian Pflug
• [PATCH v3 2/5] usb: core: make usb_set_maxpacket_ep public   Fabian Pflug
• [PATCH v3 4/5] efi: guid: add guid for usb host controller 2   Fabian Pflug
• [PATCH v3 5/5] test: x86: add test for uefi usb io   Fabian Pflug

Last message date: Fri Aug 21 06:35:46 PDT 2026
Archived on: Fri Aug 21 06:35:51 PDT 2026

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...