[RFC next 2/2] commands: lvm: inspect VGs, activate LVs

[Sascha Hauer]

On 2026-08-24 18:31, Tobias Waldekranz wrote:
> Provide the most rudimentary commands needed to inspect and activate
> volume groups (VGs) and logical volumes (LVs).
> 
> Signed-off-by: Tobias Waldekranz <tobias at waldekranz.com>
> ---
>  commands/Kconfig  |  11 ++
>  commands/Makefile |   1 +
>  commands/lvm.c    | 264 ++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 276 insertions(+)
>  create mode 100644 commands/lvm.c
> 
> diff --git a/commands/Kconfig b/commands/Kconfig
> index 08fe544ee1..d7e3bab3f9 100644
> --- a/commands/Kconfig
> +++ b/commands/Kconfig
> @@ -808,6 +808,17 @@ config CMD_VERITYSETUP
>  	  commands:
>  	        open <data-dev> <name> <hash-dev> <root-hash>
>  
> +config CMD_LVM
> +	tristate
> +	depends on DM_LVM
> +	prompt "lvm"
> +	help
> +	  lvm - inspect and activate LVM2 logical volumes
> +
> +	  commands:
> +	        pvs / vgs / lvs
> +	        activate <vg>/<lv> [<name>]

This is not consistent with the implementation which has "info" and
"activate" as subcommands.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |