August 2026 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sat Aug 1 05:17:48 PDT 2026
Ending: Mon Aug 31 12:35:55 PDT 2026
Messages: 433

• [PATCH] fixup! sandbox: enable keytoc in hosttools_defconfig   Thomas Bonnefille
• [PATCH] fixup! sandbox: enable keytoc in hosttools_defconfig   Thomas Bonnefille
• [PATCH] ci: container: build openssl against musl   Thomas Bonnefille
• [PATCH] bootm: add fitimage command line to bootargs   Thomas Bonnefille
• [PATCH] ARM: mmu: fix flush_cacheable_pages off-by-one touching guard page   Stephano Cetola
• [PATCH] ARM: mmu64: fix arch_remap_range permission-strip order   Stephano Cetola
• [PATCH] spi: rockchip: restore bus_num alias lookup via dev->id   Stephano Cetola
• [PATCH v2] spi: rockchip: restore bus_num alias lookup via dev->id   Stephano Cetola
• [PATCH 0/5] usb: xhci: fix endpoint halt and stall recovery   Stephano Cetola
• [PATCH 1/5] usb: xhci: tolerate COMP_CTX_STATE in abort_td's final completion check   Stephano Cetola
• [PATCH 2/5] usb: xhci: reset_ep: wait for real completion, not the caller's timeout   Stephano Cetola
• [PATCH 3/5] usb: xhci: reset_ep: fix misaligned pointer in Set TR Dequeue Pointer   Stephano Cetola
• [PATCH 4/5] usb: xhci: xhci_bulk_tx: re-fetch ep_ctx after resetting a halted endpoint   Stephano Cetola
• [PATCH 5/5] usb: xhci: wait a real interval for interrupt endpoint transfers   Stephano Cetola
• [PATCH] ARM: mmu: fix flush_cacheable_pages off-by-one touching guard page   Stephano Cetola
• [PATCH v2] spi: rockchip: restore bus_num alias lookup via dev->id   Stephano Cetola
• [PATCH v3] spi: rockchip: initialize bus_num to -1   Stephano Cetola
• [PATCH] extlinux: recognize LINUX as an alias for KERNEL   Stephano Cetola
• [PATCH] extlinux: resolve absolute paths against the partition root   Stephano Cetola
• barebox,state on the EFI payload: boot-disk binding and state.dtb trust   Ahmad Fatoum
• [PATCH 1/3] ARM: cpu: suppress arm_early_mmu_cache_invalidate if dcache enabled   Ahmad Fatoum
• [PATCH] fixup! sandbox: enable keytoc in hosttools_defconfig   Ahmad Fatoum
• [PATCH] fixup! net: designware_eqs: set upper 32bit address for DMA descriptors to support 64-bit addressing   Ahmad Fatoum
• [PATCH] bootm: remove previously deprecated CONFIG_BOOTM_OPTEE   Ahmad Fatoum
• [PATCH] efi: payload: gracefully handle OOM in initrd allocation   Ahmad Fatoum
• [PATCH master 1/3] test: kvx: add Labgrid env YAML for generic_defconfig   Ahmad Fatoum
• [PATCH master 2/3] kvx: select DEAD_CODE_DATA_ELIMINATION   Ahmad Fatoum
• [PATCH master 3/3] dma: fix dma_realloc_coherent compile-time error on kvx   Ahmad Fatoum
• [PATCH] fixup! sandbox: enable keytoc in hosttools_defconfig   Ahmad Fatoum
• barebox,state on the EFI payload: boot-disk binding and state.dtb trust   Ahmad Fatoum
• [PATCH] Documentation: security: mention long term stable release   Ahmad Fatoum
• [PATCH v2 2/3] ARM: lib32: pbl: implement get_time_ns and is_timeout   Ahmad Fatoum
• RK3588 optee question   Ahmad Fatoum
• RK3588 optee question   Ahmad Fatoum
• RK3588 optee question   Ahmad Fatoum
• [PATCH 00/27] ARM: Add pxa3xx and Raumfeld Speaker support   Ahmad Fatoum
• [PATCH v3 5/8] ARM: layerscape: re-init pbl clocksource   Ahmad Fatoum
• [PATCH] ci: container: build openssl against musl   Ahmad Fatoum
• iMX ddrphy_utils difference with U-boot   Ahmad Fatoum
• [PATCH v2 2/5] usb: core: make usb_set_maxpacket_ep public   Ahmad Fatoum
• [PATCH v2 5/5] test: x86: add test for uefi usb io   Ahmad Fatoum
• [PATCH v2 4/5] efi: guid: add guid for usb host controller 2   Ahmad Fatoum
• [PATCH v2 1/5] efi: usb: add header for usb-efi   Ahmad Fatoum
• [PATCH v2 3/5] drivers: usb: host: efi: add efi io driver   Ahmad Fatoum
• iMX ddrphy_utils difference with U-boot   Ahmad Fatoum
• [PATCH v2 1/5] efi: usb: add header for usb-efi   Ahmad Fatoum
• [PATCH 0/2] PBL: constructor fixes   Ahmad Fatoum
• [PATCH 1/2] clang-format: do not allow short enums on a single line   Ahmad Fatoum
• [PATCH 2/2] clang-format: align consecutive macros   Ahmad Fatoum
• [PATCH] bootm: remove previously deprecated CONFIG_BOOTM_OPTEE   Ahmad Fatoum
• [PATCH] efi: payload: gracefully handle OOM in initrd allocation   Ahmad Fatoum
• [PATCH] bcm283x: debug_ll: add RaspberryPi 4 PL011 UART support   Ahmad Fatoum
• [PATCH] ARM: mmu64: fix arch_remap_range permission-strip order   Ahmad Fatoum
• [PATCH] kbuild: drop duplicate CONFIG_LD_DEAD_CODE_DATA_ELIMINATION block   Ahmad Fatoum
• [PATCH 1/4] ARM: lds: place EFI runtime code and data in separate PT_LOAD segments   Ahmad Fatoum
• [PATCH 2/4] efi: loader: map code-type page allocations executable   Ahmad Fatoum
• [PATCH 3/4] ARM: allow CONFIG_ARM_MMU_PERMISSIONS together with EFI_RUNTIME   Ahmad Fatoum
• [PATCH 4/4] test: py: efiloader: test EFI ResetSystem from booted Linux   Ahmad Fatoum
• [PATCH v3 3/5] drivers: usb: host: efi: add efi io driver   Ahmad Fatoum
• [PATCH 1/4] commands: fix typos and punctuation in help texts   Ahmad Fatoum
• [PATCH 2/4] commands: fix stale option strings in usage lines   Ahmad Fatoum
• [PATCH 3/4] commands: fix wrong and incomplete help texts   Ahmad Fatoum
• [PATCH 4/4] Documentation: gen_commands: deduplicate entries from multiple definitions   Ahmad Fatoum
• [PATCH master 1/4] of: only replace a device tree that is actually tentative   Ahmad Fatoum
• [PATCH master 2/4] tlsf: unpoison whole block in malloc_usable_size()   Ahmad Fatoum
• [PATCH master 3/4] partitions: dos: bound extended partition chain   Ahmad Fatoum
• [PATCH master 4/4] of: fdt: bound node nesting depth in __of_unflatten_dtb   Ahmad Fatoum
• [PATCH master] scripts: make build compatible with OpenSSL v4.0   Ahmad Fatoum
• [PATCH] ARM: mmu: fix flush_cacheable_pages off-by-one touching guard page   Ahmad Fatoum
• [PATCH master] ARM64: efi-header: declare the code section writable   Ahmad Fatoum
• [PATCH v2 1/3] ARM: cpu: suppress arm_early_mmu_cache_invalidate if dcache enabled   Ahmad Fatoum
• [PATCH v2 2/3] ARM: v7r: factor out armv7r_cache_enable   Ahmad Fatoum
• [PATCH v2 3/3] ARM: always call cache_invalidate_stale before enabling D-Cache   Ahmad Fatoum
• [PATCH] efi: loader: fix year and month reported by GetTime   Ahmad Fatoum
• [PATCH] efi: don't truncate EFI_MEMORY_RUNTIME when setting resource attributes   Ahmad Fatoum
• [PATCH] serial: name the semihosting console   Ahmad Fatoum
• Driver placement for a new STUSB4500 USB-C PD sink controller   Ahmad Fatoum
• [PATCH 1/4] fs: fat: propagate actual error code when opening/creating files   Ahmad Fatoum
• [PATCH 2/4] fs: fat: drop stray printf debug output   Ahmad Fatoum
• [PATCH 3/4] fs: fat: use fixed-width 32-bit FatFs types   Ahmad Fatoum
• [PATCH 4/4] fs: fat: flush metadata updates to the block device   Ahmad Fatoum
• [PATCH v3 0/4] state: generic devicetree-overlay based state node injection   Ahmad Fatoum
• [PATCH v3 2/4] state: add CONFIG_STATE_OVERLAY to inject a state node via devicetree overlay   Ahmad Fatoum
• [PATCH v3 1/4] state: make of_state_fixup() usable outside common/state/   Ahmad Fatoum
• [PATCH v3 3/4] efi: payload: export resolved state as a BareboxState UEFI variable   Ahmad Fatoum
• [PATCH v3 4/4] efi: payload: make CONFIG_STATE_OVERLAY (and BareboxState export) work on x86   Ahmad Fatoum
• [PATCH v3 0/4] state: generic devicetree-overlay based state node injection   Ahmad Fatoum
• [PATCH master] commands: cpuinfo: unify command description   Ahmad Fatoum
• [PATCH 1/2] RISC-V: configs: enable CONFIG_DEEP_PROBE_DEFAULT   Ahmad Fatoum
• [PATCH 2/2] RISC-V: reloc: ignore R_RISCV_NONE relocations   Ahmad Fatoum
• [PATCH 1/2] efi: payload: iomem: use efi_uintn_t for the memory map key   Ahmad Fatoum
• [PATCH 2/2] efi: payload: env: don't execute unmatched network driver glob   Ahmad Fatoum
• [PATCH] virtio_blk: write back the block cache before resetting the device   Ahmad Fatoum
• [PATCH master 1/4] efi: loader: don't truncate the status in efi_init_runtime_variable_supported()   Ahmad Fatoum
• [PATCH master 2/4] efi: loader: fix sign of the error passed to ERR_PTR()   Ahmad Fatoum
• [PATCH master 3/4] efi: loader: disk: don't require block-size aligned I/O buffers   Ahmad Fatoum
• [PATCH master 4/4] efi: loader: select PRINTF_WCHAR   Ahmad Fatoum
• [PATCH] fs: efivarfs: allow creating variables under any GUID in loader mode   Ahmad Fatoum
• [PATCH] partitions: efi: only warn about valid GPT entries beyond the limit   Ahmad Fatoum
• [PATCH] fs: don't leak the parent path when openat() fails after the lookup   Ahmad Fatoum
• [PATCH 1/2] efi: loader: don't let VarToFile stop the variable file from being written   Ahmad Fatoum
• [PATCH 2/2] efi: loader: keep booting when the runtime variable store is unavailable   Ahmad Fatoum
• [PATCH 1/2] libfile: advance offset in pread_full() on short reads   Ahmad Fatoum
• [PATCH 2/2] libfile: allow fixup_path_case() to resolve directories   Ahmad Fatoum
• [PATCH] net: dsa: don't index the port array one entry past its end   Ahmad Fatoum
• [PATCH] boot: don't use the nfs:// mount path after freeing it   Ahmad Fatoum
• [PATCH] efi: devicepath: don't spin on hard drive nodes without a signature   Ahmad Fatoum
• [PATCH] efi: loader: accept NULL DevicePath in LoadImage when SourceBuffer is given   Ahmad Fatoum
• [PATCH] efi: payload: don't fail postcore initcall when image has no device path   Ahmad Fatoum
• [PATCH RFT 0/4] efi: payload: allow extension via fragments   Ahmad Fatoum
• [PATCH RFT 1/4] efi: payload: ignore ESP state.dtb if device tree is populated   Ahmad Fatoum
• [PATCH RFT 2/4] kbuild: dtc: introduce empty fallback device tree   Ahmad Fatoum
• [PATCH RFT 3/4] efi: payload: export device tree in barebox-dtb EFI variable   Ahmad Fatoum
• [PATCH RFT 4/4] Documentation: efi: describe device tree handling   Ahmad Fatoum
• [PATCH RFT 0/9] efi: payload: allow passing arguments to UKIs   Ahmad Fatoum
• [PATCH RFT 1/9] common: bootargs: drop legacy bootargs fallback with FLEXIBLE_BOOTARGS   Ahmad Fatoum
• [PATCH RFT 2/9] globalvar: skip empty variables in globalvar_get_match()   Ahmad Fatoum
• [PATCH RFT 3/9] efi: payload: always shutdown barebox when booting   Ahmad Fatoum
• [PATCH RFT 4/9] efi: payload: honour bootm dryrun in the EFI application handler   Ahmad Fatoum
• [PATCH RFT 5/9] efi: payload: pass shell arguments as load options to executed images   Ahmad Fatoum
• [PATCH RFT 6/9] efi: add global.efi.bootargs for bootm'd EFI applications   Ahmad Fatoum
• [PATCH RFT 7/9] Documentation: efi: describe load options handling   Ahmad Fatoum
• [PATCH RFT 8/9] test: py: efiloader: check global.efi.bootargs reaches the kernel   Ahmad Fatoum
• [PATCH RFT 9/9] common: bootargs: don't leave linux_bootargs dangling after free   Ahmad Fatoum
• [PATCH RFT 0/4] efi: payload: allow extension via fragments   Ahmad Fatoum
• [PATCH v3] spi: rockchip: initialize bus_num to -1   Ahmad Fatoum
• [PATCH] bootm: add fitimage command line to bootargs   Ahmad Fatoum
• [PATCH] bootm: add fitimage command line to bootargs   Ahmad Fatoum
• [PATCH] fixup! ARM: always call cache_invalidate_stale before enabling D-Cache   Ahmad Fatoum
• [PATCH master] ARM64: lds: place relocation tables explicitly   Ahmad Fatoum
• [PATCH master 1/4] common: boards: qemu: read the command line from the cmdline fw_cfg key   Ahmad Fatoum
• [PATCH master 2/4] efi: loader: fix EFI_EXIT2 tracing an uninitialized status   Ahmad Fatoum
• [PATCH master 3/4] fs: efivarfs: initialize dummy data written on variable creation   Ahmad Fatoum
• [PATCH master 4/4] sandbox: actually build the assembly setjmp/longjmp/initjmp   Ahmad Fatoum
• [PATCH 1/2] clk: k3: pll: initialize success flag in ti_pll_wait_for_lock   Ahmad Fatoum
• [PATCH 2/2] ARM: i.MX9: initialize max_speed in imx9_cpu_speed_grade_hz   Ahmad Fatoum
• [PATCH] treewide: replace inappropriate printk   Ahmad Fatoum
• [PATCH] virtio: fix out-of-bounds scatterlist array access in virtqueue_add_{in,out}buf   Ahmad Fatoum
• [PATCH] efi: loader: disk: detect the file system type only once   Ahmad Fatoum
• [PATCH] test: Containerfile: include EDK-II for RISC-V   Ahmad Fatoum
• [PATCH] video: efi_gop: reject Blt-only graphics output   Ahmad Fatoum
• [PATCH 1/8] clk: stm32f4: allow building under COMPILE_TEST and fix the build   Ahmad Fatoum
• [PATCH 2/8] clk: at91: sam9x60-pll: allow building under COMPILE_TEST and fix the build   Ahmad Fatoum
• [PATCH 3/8] clk: composite: return ERR_PTR on registration failure   Ahmad Fatoum
• [PATCH 4/8] clk: fixed-factor: use 64-bit arithmetic in recalc_rate   Ahmad Fatoum
• [PATCH 5/8] clk: imx: pllv3: use 64-bit arithmetic in fractional PLL recalc_rate   Ahmad Fatoum
• [PATCH 6/8] clk: divider: use 64-bit division in _div_round_up and divider_get_val   Ahmad Fatoum
• [PATCH 7/8] clk: divider: round up when searching for the best divider   Ahmad Fatoum
• [PATCH 8/8] clk: divider: fix calculation of maximal parent rate for a given divider   Ahmad Fatoum
• [PATCH v3 01/15] ARM: mvebu: add Netgear RN102 support   Marco Felsch
• [PATCH] bootm: remove previously deprecated CONFIG_BOOTM_OPTEE   Marco Felsch
• [PATCH v3 01/15] ARM: mvebu: add Netgear RN102 support   Sascha Hauer
• [PATCH v3 08/15] usb: ehci: initialize periodic_queue_dma   Sascha Hauer
• [PATCH v3 09/15] ata: ahci: add PCI AHCI and Marvell 9170 controller support   Sascha Hauer
• [PATCH v3 13/15] ata: ahci: add FLUSH EXT and STANDBY IMMEDIATE support during shutdown   Sascha Hauer
• [PATCH v3 14/15] ata: ahci: add shutdown helpers for AHCI controllers   Sascha Hauer
• [PATCH] ARM: boards: i.MX93: use kernel dts   Sascha Hauer
• [PATCH] sandbox: enable keytoc in hosttools_defconfig   Sascha Hauer
• [PATCH v2 0/2] PBL: add support for optimized sha256   Sascha Hauer
• [PATCH] net: designware_eqs: set upper 32bit address for DMA descriptors to support 64-bit addressing   Sascha Hauer
• [PATCH] input: gpio-keys: initialize the input value with the current gpioval   Sascha Hauer
• [PATCH] net: designware: eqos: keep virtual RX buffer address around   Sascha Hauer
• [PATCH] fixup! net: designware_eqs: set upper 32bit address for DMA descriptors to support 64-bit addressing   Sascha Hauer
• [PATCH] fixup! sandbox: enable keytoc in hosttools_defconfig   Sascha Hauer
• [PATCH] efi: payload: gracefully handle OOM in initrd allocation   Sascha Hauer
• [PATCH master 1/3] test: kvx: add Labgrid env YAML for generic_defconfig   Sascha Hauer
• [PATCH v2 3/3] pbl: introduce HAS_PBL_CLOCKSOURCE marker   Sascha Hauer
• [PATCH v2 2/3] ARM: lib32: pbl: implement get_time_ns and is_timeout   Sascha Hauer
• RK3588 optee question   Sascha Hauer
• RK3588 optee question   Sascha Hauer
• [PATCH 00/27] ARM: Add pxa3xx and Raumfeld Speaker support   Sascha Hauer
• [PATCH 01/27] ARM: pxa: remove PXA25x and PXA27x support   Sascha Hauer
• [PATCH 02/27] video: remove the PXA framebuffer driver   Sascha Hauer
• [PATCH 03/27] ARM: cache: drive the XSC3 cache with the ARMv4 functions   Sascha Hauer
• [PATCH 04/27] mci: pxamci: get the clock from the clk API   Sascha Hauer
• [PATCH 05/27] pwm: pxa: get the clock from the clk API   Sascha Hauer
• [PATCH 06/27] serial: pxa: get the clock from the clk API   Sascha Hauer
• [PATCH 07/27] clk: pxa: add a device tree clock driver for PXA3xx   Sascha Hauer
• [PATCH 08/27] mtd: nand: nand_mrvl_nfc: honour marvell,nand-keep-config   Sascha Hauer
• [PATCH 09/27] mtd: nand: nand_mrvl_nfc: support the nand-controller bindings   Sascha Hauer
• [PATCH 10/27] mtd: nand: mrvl_nfc: keep the ready latch across a STATUS command   Sascha Hauer
• [PATCH 11/27] mtd: nand: mrvl_nfc: do not report a command timeout as an error   Sascha Hauer
• [PATCH 12/27] mci: pxamci: probe from the device tree   Sascha Hauer
• [PATCH 13/27] serial: pxa: add device tree support   Sascha Hauer
• [PATCH 14/27] serial: pxa: provide the Linux console name   Sascha Hauer
• [PATCH 15/27] gpio: pxa: add a driver and switch the architecture to GPIOLIB   Sascha Hauer
• [PATCH 16/27] ARM: pxa: add DEBUG_LL support   Sascha Hauer
• [PATCH 17/27] ARM: pxa: let the board select the SoC   Sascha Hauer
• [PATCH 18/27] ARM: pxa: enable device tree support   Sascha Hauer
• [PATCH 19/27] scripts: add pxa-image   Sascha Hauer
• [PATCH 20/27] ARM: pxa: add a NAND first stage loader   Sascha Hauer
• [PATCH 21/27] filetype: detect PXA3xx NTIM images   Sascha Hauer
• [PATCH 22/27] ARM: pxa: add a barebox update handler for NAND   Sascha Hauer
• [PATCH 23/27] clocksource: add a driver for the PXA OS timer and its watchdog   Sascha Hauer
• [PATCH 24/27] ARM: pxa: move over to MULTIARCH   Sascha Hauer
• [PATCH 25/27] ARM: pxa: reset straight away and without complaining   Sascha Hauer
• [PATCH 26/27] ARM: pxa: add Raumfeld Speaker board support   Sascha Hauer
• [PATCH 27/27] ARM: multi_v5_v6_defconfig: enable PXA support   Sascha Hauer
• RK3588 optee question   Sascha Hauer
• [PATCH] Documentation: security: mention long term stable release   Sascha Hauer
• [PATCH] net: designware: eqos: keep virtual RX buffer address around   Sascha Hauer
• [PATCH 3/5] drivers: usb: host: efi: add efi io driver   Sascha Hauer
• [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Sascha Hauer
• [PATCH v3 0/8] PBL: enable timeouts in read_poll_timeout macros   Sascha Hauer
• [PATCH] scripts: gdb: fix missing pbl_barebox_break error message   Sascha Hauer
• [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Sascha Hauer
• [PATCH] ci: container: build openssl against musl   Sascha Hauer
• [PATCH 00/27] ARM: Add pxa3xx and Raumfeld Speaker support   Sascha Hauer
• [PATCH v3 2/8] ARM/ARM64/RISC-V: pbl: add constructor support   Sascha Hauer
• [PATCH v2 0/9] ARM: add Microchip LAN9696 (LAN969X) SoC and EV23X71A board   Sascha Hauer
• [PATCH 0/2] PBL: constructor fixes   Sascha Hauer
• [PATCH v3 5/8] ARM: layerscape: re-init pbl clocksource   Sascha Hauer
• [PATCH v3 4/8] drivers: arm_architected_timer: refactor for pbl compatibility   Sascha Hauer
• [PATCH 0/2] PBL: constructor fixes   Sascha Hauer
• [PATCH v3 4/8] drivers: arm_architected_timer: refactor for pbl compatibility   Sascha Hauer
• [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Sascha Hauer
• [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Sascha Hauer
• [PATCH v4 04/14] ARM: mvebu: rename PUTC_LL to MVEBU_PUTC_LL   Sascha Hauer
• [PATCH] bcm283x: debug_ll: add RaspberryPi 4 PL011 UART support   Sascha Hauer
• [PATCH v4 05/14] drivers: fan: add fan subsystem, core API and G76x fan controller driver   Sascha Hauer
• [PATCH 0/5] usb: xhci: fix endpoint halt and stall recovery   Sascha Hauer
• [PATCH] efi: payload: gracefully handle OOM in initrd allocation   Sascha Hauer
• [PATCH v2] spi: rockchip: restore bus_num alias lookup via dev->id   Sascha Hauer
• [PATCH] ARM: mmu64: fix arch_remap_range permission-strip order   Sascha Hauer
• [PATCH 1/2] clang-format: do not allow short enums on a single line   Sascha Hauer
• [PATCH] kbuild: drop duplicate CONFIG_LD_DEAD_CODE_DATA_ELIMINATION block   Sascha Hauer
• [PATCH 1/4] ARM: lds: place EFI runtime code and data in separate PT_LOAD segments   Sascha Hauer
• [PATCH 1/4] commands: fix typos and punctuation in help texts   Sascha Hauer
• [PATCH master 1/4] of: only replace a device tree that is actually tentative   Sascha Hauer
• [PATCH master] scripts: make build compatible with OpenSSL v4.0   Sascha Hauer
• [PATCH] bootm: remove previously deprecated CONFIG_BOOTM_OPTEE   Sascha Hauer
• v2026.08.0   Sascha Hauer
• [PATCH] efi: payload: gracefully handle OOM in initrd allocation   Sascha Hauer
• [PATCH 1/4] ARM: lds: place EFI runtime code and data in separate PT_LOAD segments   Sascha Hauer
• [PATCH v3] spi: rockchip: initialize bus_num to -1   Sascha Hauer
• [PATCH] extlinux: recognize LINUX as an alias for KERNEL   Sascha Hauer
• [PATCH] extlinux: make variable name consistent   Sascha Hauer
• [PATCH] extlinux: resolve absolute paths against the partition root   Sascha Hauer
• [PATCH 1/4] fs: fat: propagate actual error code when opening/creating files   Sascha Hauer
• [PATCH master] commands: cpuinfo: unify command description   Sascha Hauer
• [PATCH 1/2] RISC-V: configs: enable CONFIG_DEEP_PROBE_DEFAULT   Sascha Hauer
• [PATCH] virtio_blk: write back the block cache before resetting the device   Sascha Hauer
• [PATCH master 1/4] efi: loader: don't truncate the status in efi_init_runtime_variable_supported()   Sascha Hauer
• [PATCH] efi: payload: don't fail postcore initcall when image has no device path   Sascha Hauer
• [PATCH] efi: loader: accept NULL DevicePath in LoadImage when SourceBuffer is given   Sascha Hauer
• [PATCH] efi: devicepath: don't spin on hard drive nodes without a signature   Sascha Hauer
• [PATCH] boot: don't use the nfs:// mount path after freeing it   Sascha Hauer
• [PATCH] net: dsa: don't index the port array one entry past its end   Sascha Hauer
• [PATCH 1/2] libfile: advance offset in pread_full() on short reads   Sascha Hauer
• [PATCH 1/2] efi: payload: iomem: use efi_uintn_t for the memory map key   Sascha Hauer
• [PATCH] fs: efivarfs: allow creating variables under any GUID in loader mode   Sascha Hauer
• [PATCH] partitions: efi: only warn about valid GPT entries beyond the limit   Sascha Hauer
• [PATCH] fs: don't leak the parent path when openat() fails after the lookup   Sascha Hauer
• [PATCH] efi: loader: fix year and month reported by GetTime   Sascha Hauer
• [PATCH] efi: don't truncate EFI_MEMORY_RUNTIME when setting resource attributes   Sascha Hauer
• [PATCH] serial: name the semihosting console   Sascha Hauer
• [PATCH 1/2] efi: loader: don't let VarToFile stop the variable file from being written   Sascha Hauer
• [PATCH] regulator: pca9450: add pmic driver   Sascha Hauer
• [RFC next 0/2] dm: lvm: Initial Logical Volume Management support   Sascha Hauer
• [RFC next 1/2] dm: lvm: Initial Logical Volume Management support   Sascha Hauer
• [RFC next 2/2] commands: lvm: inspect VGs, activate LVs   Sascha Hauer
• [PATCH master] ARM64: efi-header: declare the code section writable   Sascha Hauer
• [PATCH v2 1/3] ARM: cpu: suppress arm_early_mmu_cache_invalidate if dcache enabled   Sascha Hauer
• [PATCH] usb: storage: make disk cdev name configurable via Kconfig   Sascha Hauer
• [PATCH] extlinux: make variable name consistent   Sascha Hauer
• [PATCH] fixup! ARM: always call cache_invalidate_stale before enabling D-Cache   Sascha Hauer
• [RFC next 0/2] dm: lvm: Initial Logical Volume Management support   Sascha Hauer
• [PATCH 0/4] extend cdev alias support   Sascha Hauer
• [PATCH 1/4] fs: devfs: remove aliases from the list when freeing them   Sascha Hauer
• [PATCH 2/4] fs: remove the default automount when a cdev is removed   Sascha Hauer
• [PATCH 3/4] fs: devfs: propagate cdev aliases to the partitions   Sascha Hauer
• [PATCH 4/4] fs: devfs: make the default automount reachable under cdev aliases   Sascha Hauer
• [PATCH] usb: storage: make disk cdev name configurable via Kconfig   Sascha Hauer
• [PATCH master] ARM64: lds: place relocation tables explicitly   Sascha Hauer
• [PATCH v4 05/14] drivers: fan: add fan subsystem, core API and G76x fan controller driver   Sascha Hauer
• [PATCH 00/13] USB: Make USB devices removable   Sascha Hauer
• [PATCH 01/13] usb: don't report device removal after the device name is gone   Sascha Hauer
• [PATCH 02/13] fs: devfs: count an open partition as an open device   Sascha Hauer
• [PATCH 03/13] block: propagate errors from blockdevice_unregister()   Sascha Hauer
• [PATCH 04/13] fs: add cdev_umount_all()   Sascha Hauer
• [PATCH 05/13] block: add blockdevice_unregister_removed()   Sascha Hauer
• [PATCH 06/13] usb: storage: tear the disk down properly on disconnect   Sascha Hauer
• [PATCH 07/13] usb: hub: cancel pending port scans of a removed device   Sascha Hauer
• [PATCH 08/13] usb: reuse the addresses of removed devices   Sascha Hauer
• [PATCH 09/13] usb: hub: detect disconnected devices   Sascha Hauer
• [PATCH 10/13] usb: don't keep a dangling root device on enumeration failure   Sascha Hauer
• [PATCH 11/13] usb: hub: limit the number of ports to USB_MAXCHILDREN   Sascha Hauer
• [PATCH 12/13] usb: detect unplugged devices on transfer errors   Sascha Hauer
• [PATCH 13/13] usb: storage: stop talking to a device that is gone   Sascha Hauer
• barebox,state on the EFI payload: boot-disk binding and state.dtb trust   Raymond | KelvaneOS
• barebox,state on the EFI payload: boot-disk binding and state.dtb trust   Raymond | KelvaneOS
• [PATCH v2 0/3] PBL: enable timeouts in read_poll_timeout macros   Stefan Kerkmann
• [PATCH v2 1/3] ARM64: lib64: pbl: implement get_time_ns and is_timeout   Stefan Kerkmann
• [PATCH v2 2/3] ARM: lib32: pbl: implement get_time_ns and is_timeout   Stefan Kerkmann
• [PATCH v2 3/3] pbl: introduce HAS_PBL_CLOCKSOURCE marker   Stefan Kerkmann
• [PATCH v3 0/8] PBL: enable timeouts in read_poll_timeout macros   Stefan Kerkmann
• [PATCH v3 1/8] RISC-V: setup_c: avoid clearing BSS twice   Stefan Kerkmann
• [PATCH v3 2/8] ARM/ARM64/RISC-V: pbl: add constructor support   Stefan Kerkmann
• [PATCH v3 3/8] clocksource: allow re-init for same clock   Stefan Kerkmann
• [PATCH v3 4/8] drivers: arm_architected_timer: refactor for pbl compatibility   Stefan Kerkmann
• [PATCH v3 5/8] ARM: layerscape: re-init pbl clocksource   Stefan Kerkmann
• [PATCH v3 6/8] ARM: socfpga: agilex5: re-init pbl clocksource   Stefan Kerkmann
• [PATCH v3 7/8] ARM64: enable PBL_CLOCKSOURCE compatibility   Stefan Kerkmann
• [PATCH v3 8/8] linux/iopoll: enable polled timeouts for PBL_CLOCKSOURCE   Stefan Kerkmann
• [PATCH] amend! ARM/ARM64/RISC-V: pbl: add constructor support   Stefan Kerkmann
• [PATCH 0/2] PBL: constructor fixes   Stefan Kerkmann
• [PATCH 1/2] ARM/ARM64/RISC-V: pbl: guard constructor support   Stefan Kerkmann
• [PATCH 2/2] ARM64: setup_c: abi safe link register storage   Stefan Kerkmann
• [PATCH 0/2] PBL: constructor fixes   Stefan Kerkmann
• [PATCH 0/2] PBL: constructor fixes   Stefan Kerkmann
• [PATCH v3 4/8] drivers: arm_architected_timer: refactor for pbl compatibility   Stefan Kerkmann
• [PATCH v3 5/8] ARM: layerscape: re-init pbl clocksource   Stefan Kerkmann
• [PATCH v3 4/8] drivers: arm_architected_timer: refactor for pbl compatibility   Stefan Kerkmann
• [PATCH] regulator: pca9450: add pmic driver   Stefan Kerkmann
• [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Uwe Kleine-König
• [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Uwe Kleine-König
• [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Luca Lauro
• [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Luca Lauro
• [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Luca Lauro
• [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Luca Lauro
• [PATCH v4 04/14] ARM: mvebu: rename PUTC_LL to MVEBU_PUTC_LL   Luca Lauro
• [PATCH v4 05/14] drivers: fan: add fan subsystem, core API and G76x fan controller driver   Luca Lauro
• [PATCH 0/5] Add support for USB-EFI devices in EFI Playload   Fabian Pflug
• [PATCH 1/5] efi: usb: add header for usb-efi   Fabian Pflug
• [PATCH 2/5] usb: core: make usb_set_maxpacket_ep public   Fabian Pflug
• [PATCH 3/5] drivers: usb: host: efi: add efi io driver   Fabian Pflug
• [PATCH 4/5] efi: guid: add guid for usb host controller 2   Fabian Pflug
• [PATCH 5/5] test: x86: add test for uefi usb io   Fabian Pflug
• [PATCH v2 0/5] Add support for USB-EFI devices in EFI Playload   Fabian Pflug
• [PATCH v2 1/5] efi: usb: add header for usb-efi   Fabian Pflug
• [PATCH v2 2/5] usb: core: make usb_set_maxpacket_ep public   Fabian Pflug
• [PATCH v2 3/5] drivers: usb: host: efi: add efi io driver   Fabian Pflug
• [PATCH v2 4/5] efi: guid: add guid for usb host controller 2   Fabian Pflug
• [PATCH v2 5/5] test: x86: add test for uefi usb io   Fabian Pflug
• [PATCH v2 1/5] efi: usb: add header for usb-efi   Fabian Pflug
• [PATCH v2 1/5] efi: usb: add header for usb-efi   Fabian Pflug
• [PATCH v3 0/5] Add support for USB-EFI devices in EFI Playload   Fabian Pflug
• [PATCH v3 1/5] efi: usb: add header for usb-efi   Fabian Pflug
• [PATCH v3 2/5] usb: core: make usb_set_maxpacket_ep public   Fabian Pflug
• [PATCH v3 3/5] drivers: usb: host: efi: add efi io driver   Fabian Pflug
• [PATCH v3 4/5] efi: guid: add guid for usb host controller 2   Fabian Pflug
• [PATCH v3 5/5] test: x86: add test for uefi usb io   Fabian Pflug
• [PATCH v3 00/15] ARM: mvebu: add Netgear RN102/RN104 support and related drivers   Luca Lauro via B4 Relay
• [PATCH v3 01/15] ARM: mvebu: add Netgear RN102 support   Luca Lauro via B4 Relay
• [PATCH v3 02/15] ARM: mvebu: enable RN102 in mvebu_defconfig   Luca Lauro via B4 Relay
• [PATCH v3 03/15] ARM: mvebu: improve Netgear RN104 support   Luca Lauro via B4 Relay
• [PATCH v3 04/15] ARM: mvebu: rename PUTC_LL to MVEBU_PUTC_LL   Luca Lauro via B4 Relay
• [PATCH v3 05/15] drivers: fan: add fan subsystem, core API and G76x fan controller driver   Luca Lauro via B4 Relay
• [PATCH v3 06/15] commands: add fan control command   Luca Lauro via B4 Relay
• [PATCH v3 07/15] usb: ehci: add Marvell EHCI host controller driver   Luca Lauro via B4 Relay
• [PATCH v3 08/15] usb: ehci: initialize periodic_queue_dma   Luca Lauro via B4 Relay
• [PATCH v3 09/15] ata: ahci: add PCI AHCI and Marvell 9170 controller support   Luca Lauro via B4 Relay
• [PATCH v3 10/15] ata: ahci: fix zero-length DMA handling   Luca Lauro via B4 Relay
• [PATCH v3 11/15] ata: ahci: add helper for ATA commands without data   Luca Lauro via B4 Relay
• [PATCH v3 12/15] ata: ahci: improve AHCI port bring-up sequence   Luca Lauro via B4 Relay
• [PATCH v3 13/15] ata: ahci: add FLUSH EXT and STANDBY IMMEDIATE support during shutdown   Luca Lauro via B4 Relay
• [PATCH v3 14/15] ata: ahci: add shutdown helpers for AHCI controllers   Luca Lauro via B4 Relay
• [PATCH v3 15/15] ata: ahci: cleanup legacy code and remove unused paths   Luca Lauro via B4 Relay
• [PATCH v4 00/14] (no cover subject)   Luca Lauro via B4 Relay
• [PATCH v4 01/14] ARM: mvebu: add Netgear RN102 support   Luca Lauro via B4 Relay
• [PATCH v4 02/14] ARM: mvebu: enable RN102 in mvebu_defconfig   Luca Lauro via B4 Relay
• [PATCH v4 03/14] ARM: mvebu: improve Netgear RN104 support   Luca Lauro via B4 Relay
• [PATCH v4 04/14] ARM: mvebu: rename PUTC_LL to MVEBU_PUTC_LL   Luca Lauro via B4 Relay
• [PATCH v4 05/14] drivers: fan: add fan subsystem, core API and G76x fan controller driver   Luca Lauro via B4 Relay
• [PATCH v4 06/14] commands: add fan control command   Luca Lauro via B4 Relay
• [PATCH v4 07/14] usb: ehci: add Marvell EHCI host controller driver   Luca Lauro via B4 Relay
• [PATCH v4 08/14] usb: ehci: initialize periodic_queue_dma   Luca Lauro via B4 Relay
• [PATCH v4 09/14] ata: ahci: add PCI AHCI and Marvell 9170 controller support   Luca Lauro via B4 Relay
• [PATCH v4 10/14] ata: ahci: fix zero-length DMA handling   Luca Lauro via B4 Relay
• [PATCH v4 11/14] ata: ahci: add helper for ATA commands without data   Luca Lauro via B4 Relay
• [PATCH v4 12/14] ata: ahci: improve AHCI port bring-up sequence   Luca Lauro via B4 Relay
• [PATCH v4 13/14] ata: ahci: add FLUSH EXT and STANDBY IMMEDIATE support during shutdown   Luca Lauro via B4 Relay
• [PATCH v4 14/14] ata: ahci: cleanup legacy code and remove unused paths   Luca Lauro via B4 Relay
• [PATCH v2 0/9] ARM: add Microchip LAN9696 (LAN969X) SoC and EV23X71A board   Oleksij Rempel
• [PATCH v2 1/9] ARM: introduce ARCH_MICROCHIP for ARM64 Microchip SoCs   Oleksij Rempel
• [PATCH v2 2/9] serial: atmel: add lan9696 (Microchip LAN969X) support   Oleksij Rempel
• [PATCH v2 3/9] clk: add Microchip LAN966X / LAN969X generic clock controller driver   Oleksij Rempel
• [PATCH v2 4/9] clk: tolerate clocks registered without a name   Oleksij Rempel
• [PATCH v2 5/9] pinctrl: ocelot: port Microsemi/Microchip Ocelot pinctrl from Linux   Oleksij Rempel
• [PATCH v2 6/9] gpio: add Microchip SGPIO (serial GPIO) driver   Oleksij Rempel
• [PATCH v2 7/9] reset: add Microchip sparx5 / LAN969X / LAN966X switch reset driver   Oleksij Rempel
• [PATCH v2 8/9] spi: atmel-quadspi: add Microchip LAN966X / LAN969X support   Oleksij Rempel
• [PATCH v2 9/9] ARM: add Novarq Tactical 1000 board   Oleksij Rempel
• Driver placement for a new STUSB4500 USB-C PD sink controller   Giandomenico Rossi
• Driver placement for a new STUSB4500 USB-C PD sink controller   Giandomenico Rossi
• RK3588 optee question   Alexander Shiyan
• RK3588 optee question   Alexander Shiyan
• RK3588 optee question   Alexander Shiyan
• RK3588 optee question   Alexander Shiyan
• RK3588 optee question   Alexander Shiyan
• RK3588 optee question   Alexander Shiyan
• RK3588 optee question   Alexander Shiyan
• RK3588 optee question   Alexander Shiyan
• [PATCH] serial: ns16550: fix memory leak of linux_earlycon_name on probe failure   Alexander Shiyan
• [PATCH] amba: simplify amba_lookup function   Alexander Shiyan
• [PATCH v2 1/3] ARM: cpu: suppress arm_early_mmu_cache_invalidate if dcache enabled   Lucas Stach
• [PATCH] scripts: gdb: fix missing pbl_barebox_break error message   Michael Tretter
• [RFC next 0/2] dm: lvm: Initial Logical Volume Management support   Tobias Waldekranz
• [RFC next 1/2] dm: lvm: Initial Logical Volume Management support   Tobias Waldekranz
• [RFC next 2/2] commands: lvm: inspect VGs, activate LVs   Tobias Waldekranz
• [RFC next 0/2] dm: lvm: Initial Logical Volume Management support   Tobias Waldekranz
• [RFC next 1/2] dm: lvm: Initial Logical Volume Management support   Tobias Waldekranz
• [RFC next 2/2] commands: lvm: inspect VGs, activate LVs   Tobias Waldekranz
• [PATCH v3 0/4] state: generic devicetree-overlay based state node injection   anis chali
• [PATCH v3 0/4] state: generic devicetree-overlay based state node injection   anis chali
• [PATCH v3 3/4] efi: payload: export resolved state as a BareboxState UEFI variable   anis chali
• [PATCH v3 1/4] state: make of_state_fixup() usable outside common/state/   anis chali
• [PATCH v3 2/4] state: add CONFIG_STATE_OVERLAY to inject a state node via devicetree overlay   anis chali
• [PATCH] efi: payload: apply barebox fixups to the devicetree passed to Linux   chalianis1 at gmail.com
• [PATCH] bcm283x: debug_ll: add RaspberryPi 4 PL011 UART support   chalianis1 at gmail.com
• [PATCH v2 0/1] efi: payload: apply barebox fixups to the devicetree passed to Linux   chalianis1 at gmail.com
• [PATCH v2 1/1] efi: payload: apply barebox fixups to the devicetree passed to Linux   chalianis1 at gmail.com
• [PATCH v2 0/3] state: generic devicetree-overlay based state node injection   chalianis1 at gmail.com
• [PATCH v2 1/3] state: make of_state_fixup() usable outside common/state/   chalianis1 at gmail.com
• [PATCH v2 2/3] state: add CONFIG_STATE_OVERLAY to inject a state node via devicetree overlay   chalianis1 at gmail.com
• [PATCH v2 3/3] efi: payload: export resolved state as a BareboxState UEFI variable   chalianis1 at gmail.com
• [PATCH v2 0/3] state: generic devicetree-overlay based state node injection   chalianis1 at gmail.com
• [PATCH v2 1/3] state: make of_state_fixup() usable outside common/state/   chalianis1 at gmail.com
• [PATCH v2 2/3] state: add CONFIG_STATE_OVERLAY to inject a state node via devicetree overlay   chalianis1 at gmail.com
• [PATCH v2 3/3] efi: payload: export resolved state as a BareboxState UEFI variable   chalianis1 at gmail.com
• [PATCH v3 0/4] state: generic devicetree-overlay based state node injection   chalianis1 at gmail.com
• [PATCH v3 1/4] state: make of_state_fixup() usable outside common/state/   chalianis1 at gmail.com
• [PATCH v3 2/4] state: add CONFIG_STATE_OVERLAY to inject a state node via devicetree overlay   chalianis1 at gmail.com
• [PATCH v3 3/4] efi: payload: export resolved state as a BareboxState UEFI variable   chalianis1 at gmail.com
• [PATCH v3 4/4] efi: payload: make CONFIG_STATE_OVERLAY (and BareboxState export) work on x86   chalianis1 at gmail.com
• [PATCH] usb: dwc2: skip polling for the soft reset clear bit and add after reset delay   chalianis1 at gmail.com
• [PATCH] usb: dwc2: skip polling for the soft reset clear bit and add after reset delay   chalianis1 at gmail.com
• [PATCH RFT 0/4] efi: payload: allow extension via fragments   chalianis1 at gmail.com
• [PATCH] usb: storage: make disk cdev name configurable via Kconfig   chalianis1 at gmail.com
• [PATCH] usb: storage: make disk cdev name configurable via Kconfig   chalianis1 at gmail.com
• [PATCH] usb: storage: make disk cdev name configurable via Kconfig   chalianis1 at gmail.com
• [PATCH v3] spi: rockchip: initialize bus_num to -1   support
• [PATCH] net: designware_eqs: set upper 32bit address for DMA descriptors to support 64-bit addressing   zhengxiaojun

Last message date: Mon Aug 31 12:35:55 PDT 2026
Archived on: Mon Aug 31 12:36:23 PDT 2026

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...