[PATCH v4 00/14] (no cover subject)

[Luca Lauro via B4 Relay]

Changes in v4:
	- applied proposed changes in patches 01/15 and 02/15
	- Cleaned patch 08/15
	- Fixed PCI vendor ID handling in patch 09/15
	- Moved ahci_devices list introduction to patch 13/15
	- Removed unused AHCI shutdown helpers (patch 14/15 in v3)

Link to v3:
https://patch.msgid.link/20260802-rn102-rn104-series-v3-0-f7685a279fb5@gmail.com

ARM: mvebu: add Netgear RN102/RN104 support and related drivers

This series adds full barebox support for the Netgear RN102 and RN104
NAS platforms based on the Marvell Armada 370 SoC. Both devices share
the same hardware architecture, differing mainly in the number of drive
bays and board‑level integration.

The series introduces:
 - lowlevel initialization code for RN102 and RN104
 - board support files and environment integration
 - barebox‑specific device tree overlays for both platforms
 - image generation support and defconfig updates
 - fan controller subsystem and G76x driver
 - fan control command and Kconfig/Makefile integration
 - Marvell‑specific EHCI host controller driver
 - USB/EHCI fixes
 - ATA/AHCI improvements

The goal is to provide complete bootloader support for these NAS
devices, enabling reliable initialization of storage, USB, fan control,
and board‑specific peripherals. The patches have been tested on RN102.

Changes in v3:
 - cleaned up whitespace and indentation issues
 - squashed fan command integration into a single commit
 - removed noisy or unrelated changes
 - improved commit messages and structure

Link to v2:
https://patch.msgid.link/20260728-rn102-rn104-series-v2-0-ae31f55b7bc8@gmail.com

Signed-off-by: Luca Lauro <famlauro93l at gmail.com>

---
Luca Lauro (14):
      ARM: mvebu: add Netgear RN102 support
      ARM: mvebu: enable RN102 in mvebu_defconfig
      ARM: mvebu: improve Netgear RN104 support
      ARM: mvebu: rename PUTC_LL to MVEBU_PUTC_LL
      drivers: fan: add fan subsystem, core API and G76x fan controller driver
      commands: add fan control command
      usb: ehci: add Marvell EHCI host controller driver
      usb: ehci: initialize periodic_queue_dma
      ata: ahci: add PCI AHCI and Marvell 9170 controller support
      ata: ahci: fix zero-length DMA handling
      ata: ahci: add helper for ATA commands without data
      ata: ahci: improve AHCI port bring-up sequence
      ata: ahci: add FLUSH EXT and STANDBY IMMEDIATE support during shutdown
      ata: ahci: cleanup legacy code and remove unused paths

 arch/arm/boards/Makefile                   |    1 +
 arch/arm/boards/netgear-rn102/Makefile     |    4 +
 arch/arm/boards/netgear-rn102/board.c      |  219 +++++
 arch/arm/boards/netgear-rn102/lowlevel.c   |   58 ++
 arch/arm/boards/netgear-rn104/Makefile     |    1 +
 arch/arm/boards/netgear-rn104/board.c      |  170 ++++
 arch/arm/boards/netgear-rn104/lowlevel.c   |   37 +-
 arch/arm/configs/mvebu_defconfig           |    1 +
 arch/arm/dts/Makefile                      |    1 +
 arch/arm/dts/armada-370-rn102-bb.dts       |   96 +++
 arch/arm/dts/armada-370-rn104-bb.dts       |   85 +-
 arch/arm/mach-mvebu/Kconfig                |    4 +
 commands/Kconfig                           |    7 +
 commands/Makefile                          |    2 +
 commands/fan.c                             |  286 +++++++
 drivers/Kconfig                            |    1 +
 drivers/Makefile                           |    1 +
 drivers/ata/ahci.c                         |  325 ++++----
 drivers/ata/ahci.h                         |    1 +
 drivers/fan/Kconfig                        |   35 +
 drivers/fan/Makefile                       |    8 +
 drivers/fan/fan.c                          |  180 +++++
 drivers/fan/i2c_fan_controllers/Kconfig    |    6 +
 drivers/fan/i2c_fan_controllers/Makefile   |    5 +
 drivers/fan/i2c_fan_controllers/g76x.c     | 1185 ++++++++++++++++++++++++++++
 drivers/fan/other_fan_controllers/Kconfig  |    7 +
 drivers/fan/other_fan_controllers/Makefile |    3 +
 drivers/fan/spi_fan_controllers/Kconfig    |    1 +
 drivers/fan/spi_fan_controllers/Makefile   |    3 +
 drivers/usb/host/Kconfig                   |    7 +
 drivers/usb/host/Makefile                  |   13 +-
 drivers/usb/host/ehci-hcd.c                |    2 +
 drivers/usb/host/ehci-marvell.c            |  228 ++++++
 images/Makefile.mvebu                      |   13 +-
 include/fan/fan.h                          |   94 +++
 include/fan/i2c_fan_controllers/g76x.h     |   37 +
 include/mach/mvebu/debug_ll.h              |    2 +-
 37 files changed, 2947 insertions(+), 182 deletions(-)
---
base-commit: f9cc366e5b67680473e4ab7837eeb27bf1b5a567
change-id: 20260723-rn102-rn104-series-d668eb09d0ff

Best regards,
--  
Luca Lauro <famlauro93l at gmail.com>