February 2023 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Feb 1 01:44:35 PST 2023
Ending: Tue Feb 28 23:53:24 PST 2023
Messages: 313

• [PATCH] I2C: i.MX: early: Use a custom delay on i.MX6   John Watts
  • [PATCH] I2C: i.MX: early: Use a custom delay on i.MX6   Sascha Hauer
    • [PATCH] I2C: i.MX: early: Use a custom delay on i.MX6   John Watts
• [PATCH] I2C: i.MX: early: Use internal udelay   Alexander Shiyan
  • [PATCH] I2C: i.MX: early: Use internal udelay   Jookia
  • [PATCH] I2C: i.MX: early: Use internal udelay   Ahmad Fatoum
  • [PATCH] I2C: i.MX: early: Use internal udelay   Jules Maselbas
    • [PATCH] I2C: i.MX: early: Use internal udelay   Ahmad Fatoum
• [PATCH v2 1/2] ARM: dts: stm32mp15x: adjust USB OTG gadget tx fifo sizes   Ahmad Fatoum
• [PATCH v2 2/2] usb: dwc2: fix multiplier handling in endpoint setup   Ahmad Fatoum
  • [PATCH v2 2/2] usb: dwc2: fix multiplier handling in endpoint setup   Sascha Hauer
• [PATCH] fs: nfs: Error if a port is unregistered   John Watts
  • [PATCH] fs: nfs: Error if a port is unregistered   Sascha Hauer
    • [PATCH] fs: nfs: Error if a port is unregistered   Jookia
      • [PATCH] fs: nfs: Error if a port is unregistered   Ahmad Fatoum
      • [PATCH] fs: nfs: Error if a port is unregistered   John Watts
      • [PATCH] fs: nfs: Error if a port is unregistered   Ahmad Fatoum
  • [PATCH v2] fs: nfs: Error if a port is unregistered   John Watts
    • [PATCH v2] fs: nfs: Error if a port is unregistered   Sascha Hauer
• [PATCH] ddr_dimms: Check spd->mem_type before computing parameters   Sascha Hauer
• [PATCH v4 0/5] Add support for the Kosagi Novena board   John Watts
  • [PATCH v4 1/4] ARM: novena: Add Kosagi Novena board   John Watts
  • [PATCH v4 2/4] ARM: novena: Setup RAM using static configuration   John Watts
  • [PATCH v4 3/4] ARM: novena: Read Ethernet MAC address from EEPROM   John Watts
  • [PATCH v4 4/4] ARM: novena: Use DDR3 information from SPD EEPROM   John Watts
  • [PATCH v4 0/5] Add support for the Kosagi Novena board   Marco Felsch
  • [PATCH v4 0/5] Add support for the Kosagi Novena board   Sascha Hauer
• [PATCH] clk: imx8mp: add USB suspend clock   Lucas Stach
  • [PATCH] clk: imx8mp: add USB suspend clock   Sascha Hauer
    • [PATCH] clk: imx8mp: add USB suspend clock   Lucas Stach
      • [PATCH] clk: imx8mp: add USB suspend clock   Sascha Hauer
• [PATCH master] fs: align truncate return codes with POSIX   Ahmad Fatoum
  • [PATCH master] fs: align truncate return codes with POSIX   Marco Felsch
  • [PATCH master] fs: align truncate return codes with POSIX   Sascha Hauer
• [PATCH master 1/3] include: linux/printk: implement pr_*_once macros   Ahmad Fatoum
  • [PATCH master 2/3] fs: tftp: print message when NIC can't keep us with TFTP windowsize   Ahmad Fatoum
  • [PATCH 3/3] include: printk: retire printk_once for pr_debug_once   Ahmad Fatoum
• [PATCH 1/3] RISC-V: Makefile: cleanup layout   Marco Felsch
  • [PATCH 2/3] RISC-V: Makefile: align the isa string setting with the kernel   Marco Felsch
  • [PATCH 3/3] RISC-V: Makefile: fix build with binutils 2.38   Marco Felsch
  • [PATCH 1/3] RISC-V: Makefile: cleanup layout   Sascha Hauer
• [PATCH v2] fs: align write return codes with POSIX   Ahmad Fatoum
  • [PATCH v2] fs: align write return codes with POSIX   Sascha Hauer
• [PATCH master v2 1/3] include: linux/printk: implement pr_*_once macros   Ahmad Fatoum
  • [PATCH v2 2/3] fs: tftp: print message when stack can't keep us with TFTP windowsize   Ahmad Fatoum
  • [PATCH master v2 1/3] include: linux/printk: implement pr_*_once macros   Sascha Hauer
• [PATCH v2 3/3] include: printk: retire printk_once for pr_debug_once   Ahmad Fatoum
• [PATCH] RISC-V: virt: riscvemu: fix unit address in node name   Ahmad Fatoum
  • [PATCH] RISC-V: virt: riscvemu: fix unit address in node name   Marco Felsch
  • [PATCH] RISC-V: virt: riscvemu: fix unit address in node name   Sascha Hauer
• [PATCH] fs: remove unused members of struct stat   Ahmad Fatoum
  • [PATCH] fs: remove unused members of struct stat   Sascha Hauer
• [PATCH 1/5] nvmem: add support for post processing   Lucas Stach
  • [PATCH 3/5] nvmem: regmap: allow to register with post processing   Lucas Stach
  • [PATCH 5/5] ARM: dts: i.MX8MP: drop OCOTP MAC address provider   Lucas Stach
  • [PATCH 1/5] nvmem: add support for post processing   Sascha Hauer
• [PATCH 2/5] nvmem: ocotp: switch to nvmem_regmap_register   Lucas Stach
• [PATCH 4/5] nvmem: ocotp: add post processing for MAC cells   Lucas Stach
• [PATCH v2 0/3] net: ifup: greatly reduce ifup -a time for multiple network interface   Sascha Hauer
• [PATCH v2] ratp: Fix retransmission for header-only packets   Sascha Hauer
  • [PATCH v2] ratp: Fix retransmission for header-only packets   Jules Maselbas
• [PATCH] Documentation: networking: improve net.* variable description   Roland Hieber
  • [PATCH] Documentation: networking: improve net.* variable description   Sascha Hauer
• [PATCH] ARM: i.MX8MP-EVK: increase VDD_ARM to OD voltage   Lucas Stach
  • [PATCH] ARM: i.MX8MP-EVK: increase VDD_ARM to OD voltage   Ahmad Fatoum
    • [PATCH] ARM: i.MX8MP-EVK: increase VDD_ARM to OD voltage   Lucas Stach
  • [PATCH] ARM: i.MX8MP-EVK: increase VDD_ARM to OD voltage   Sascha Hauer
• [PATCH 1/3] ARM: i.MX8M: esdctl: limit i.MX8MP early memory size   Lucas Stach
  • [PATCH 2/3] ARM: i.MX8M: esdctl: use common compatible to detect i.MX8M* DDRC   Lucas Stach
    • [PATCH 2/3] ARM: i.MX8M: esdctl: use common compatible to detect i.MX8M* DDRC   Marco Felsch
      • [PATCH 2/3] ARM: i.MX8M: esdctl: use common compatible to detect i.MX8M* DDRC   Lucas Stach
  • [PATCH 3/3] ARM: dts: i.MX8MP: add DDRC compatibles   Lucas Stach
  • [PATCH 1/3] ARM: i.MX8M: esdctl: limit i.MX8MP early memory size   Sascha Hauer
    • [PATCH 1/3] ARM: i.MX8M: esdctl: limit i.MX8MP early memory size   Sascha Hauer
• [PATCH 0/5] rpi: platform code improvements   Daniel Brát
  • [PATCH 1/5] ARM: rpi: rename function getting mac address   Daniel Brát
  • [PATCH 2/5] ARM: rpi: add serial number readout   Daniel Brát
    • [PATCH 2/5] ARM: rpi: add serial number readout   Marco Felsch
  • [PATCH 3/5] ARM: rpi: rework rpi board init code   Daniel Brát
    • [PATCH 3/5] ARM: rpi: rework rpi board init code   Marco Felsch
  • [PATCH 4/5] ARM: rpi: add machine-id support   Daniel Brát
  • [PATCH 5/5] ARM: rpi: enable reset source detection in defconfig   Daniel Brát
• [PATCH 1/3] ARM: i.MX Riotboard: Add SD card update handler   Sascha Hauer
  • [PATCH 2/3] ARM: i.MX Riotboard: Switch to board driver   Sascha Hauer
  • [PATCH 3/3] ARM: i.MX Riotboard: Let phy driver initialize the phy   Sascha Hauer
• [PATCH v3 1/5] bbremote: Fix default payload value in BBPacket   Jules Maselbas
  • [PATCH v3 3/5] ratp: Fix retransmission for header-only packets   Jules Maselbas
  • [PATCH v3 4/5] ratp: Increase the establish timeout to 1sec   Jules Maselbas
  • [PATCH v3 5/5] ratp: Increase the initial RTO to 200ms   Jules Maselbas
  • [PATCH v3 1/5] bbremote: Fix default payload value in BBPacket   Sascha Hauer
• [PATCH v3 2/5] bbremote: Fix RATP handshake, errata #7321 for RFC916   Jules Maselbas
• [PATCH v2 1/3] ARM: i.MX8M: esdctl: limit i.MX8MP early memory size   Lucas Stach
• [PATCH v2 2/3] ARM: i.MX8M: esdctl: use common compatible to detect i.MX8MQ/MM/MP DDRC   Lucas Stach
  • [PATCH v2 2/3] ARM: i.MX8M: esdctl: use common compatible to detect i.MX8MQ/MM/MP DDRC   Marco Felsch
• [PATCH v2 3/3] ARM: dts: i.MX8MP: add DDRC compatibles   Lucas Stach
• [PATCH 1/2] ddr: imx8m: add support for 3720 MHz DDR rate   Lucas Stach
  • [PATCH 2/2] ARM: i.MX8MP: add initial Polyhex DEBIX Model A support   Lucas Stach
    • [PATCH 2/2] ARM: i.MX8MP: add initial Polyhex DEBIX Model A support   Ahmad Fatoum
• [PATCH 1/2] net: rtl8139: remove dependence on MIPS   Denis Orlov
  • [PATCH 2/2] net: rtl8139: fix ifdown/ifup issues   Denis Orlov
  • [PATCH 1/2] net: rtl8139: remove dependence on MIPS   Sascha Hauer
• [PATCH] fixup! net: rtl8139: fix ifdown/ifup issues   Denis Orlov
• [PATCH 0/2] Initial LS1021-IOT board support   Renaud Barbier
  • [PATCH 0/2] Initial LS1021-IOT board support   Sascha Hauer
    • [PATCH 0/2] Initial LS1021-IOT board support   Renaud Barbier
      • [PATCH 0/2] Initial LS1021-IOT board support   Sascha Hauer
      • [PATCH 0/2] Initial LS1021-IOT board support   Renaud Barbier
      • [PATCH 0/2] Initial LS1021-IOT board support   Ahmad Fatoum
• [PATCH 1/2] ARM: Add Layerscape v7 support   Renaud Barbier
• [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support   Renaud Barbier
  • [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support   Sascha Hauer
    • [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support   Renaud Barbier
      • [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support   Sascha Hauer
      • [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support   Renaud Barbier
      • [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support   Sascha Hauer
      • [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support   Renaud Barbier
      • [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support   Sascha Hauer
      • [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support   Renaud Barbier
      • [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support   Sascha Hauer
      • [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support   Renaud Barbier
      • [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support   Renaud Barbier
• [PATCH v3 1/3] ARM: i.MX8M: esdctl: use common compatible to detect i.MX8MQ/MM/MP DDRC   Lucas Stach
  • [PATCH v3 3/3] ARM: dts: i.MX8MP: remove DSP and DSP reserved memory nodes   Lucas Stach
  • [PATCH v3 1/3] ARM: i.MX8M: esdctl: use common compatible to detect i.MX8MQ/MM/MP DDRC   Sascha Hauer
• [PATCH v3 2/3] ARM: dts: i.MX8MP: add DDRC compatibles   Lucas Stach
• [PATCH v2 1/2] ddr: imx8m: add support for 3720 MHz DDR rate   Lucas Stach
  • [PATCH v2 2/2] ARM: i.MX8MP: add initial Polyhex DEBIX Model A support   Lucas Stach
    • [PATCH v2 2/2] ARM: i.MX8MP: add initial Polyhex DEBIX Model A support   Sascha Hauer
  • [PATCH v2 1/2] ddr: imx8m: add support for 3720 MHz DDR rate   Sascha Hauer
• [PATCH] pinctrl: rockchip: fix get_value   Kilian Strasser
  • [PATCH] pinctrl: rockchip: fix get_value   Sascha Hauer
• [PATCH] nvme: parse partition table when registering a block device   Denis Orlov
  • [PATCH] nvme: parse partition table when registering a block device   Sascha Hauer
• [PATCH 0/2] make e1000 work on MIPS   Denis Orlov
  • [PATCH 1/2] net: e1000: properly map dma allocations   Denis Orlov
  • [PATCH 2/2] dma: use virt/phys conversions when no dma_offset is specified   Denis Orlov
  • [PATCH 0/2] make e1000 work on MIPS   Sascha Hauer
• [PATCH 0/4] MIPS: dma: random fixes and improvements   Denis Orlov
  • [PATCH 1/4] MIPS: dma: fix nullptr handling in dma_free_coherent   Denis Orlov
  • [PATCH 2/4] MIPS: dma: remove unnecessary ifdefs   Denis Orlov
  • [PATCH 3/4] MIPS: dma: add arch-specific dma_alloc() implementation   Denis Orlov
  • [PATCH 4/4] MIPS: dma: simplify source structure   Denis Orlov
  • [PATCH 0/4] MIPS: dma: random fixes and improvements   Sascha Hauer
• [PATCH 1/2] of: base: factor out of_merge_nodes from of_copy_node   Ahmad Fatoum
  • [PATCH 2/2] boards: qemu-virt: support passing in FIT public key   Ahmad Fatoum
• [PATCH v2 1/4] of: base: factor out of_merge_nodes from of_copy_node   Ahmad Fatoum
  • [PATCH v2 2/4] of: support of_ensure_probed for top-level machine device   Ahmad Fatoum
  • [PATCH v2 4/4] boards: qemu-virt: support passing in FIT public key   Ahmad Fatoum
    • [PATCH v2 4/4] boards: qemu-virt: support passing in FIT public key   Jan Lübbe
    • [PATCH v2 4/4] boards: qemu-virt: support passing in FIT public key   Sascha Hauer
      • [PATCH v2 4/4] boards: qemu-virt: support passing in FIT public key   Ahmad Fatoum
• [PATCH v2 3/4] boards: qemu-virt: ensure board driver probe at postcore_initcall level   Ahmad Fatoum
• [PATCH 1/2] Documentation: networking: resize reStructuredText table   Roland Hieber
• [PATCH 2/2] defaultenv: boot/net: allow customising NFS port and path   Roland Hieber
  • [PATCH 2/2] defaultenv: boot/net: allow customising NFS port and path   Sascha Hauer
    • [PATCH 2/2] defaultenv: boot/net: allow customising NFS port and path   Roland Hieber
• [yocto] [OE-core] [PATCH 1/2] barebox: add initial support   Enrico Jörns
  • [yocto] [OE-core] [PATCH 1/2] barebox: add initial support   Richard Purdie
    • [yocto] [OE-core] [PATCH 1/2] barebox: add initial support   Alexander Kanavin
      • [yocto] [OE-core] [PATCH 1/2] barebox: add initial support   Enrico Jörns
      • [yocto] [OE-core] [PATCH 1/2] barebox: add initial support   Otavio Salvador
      • [yocto] [OE-core] [PATCH 1/2] barebox: add initial support   Enrico Jörns
      • [yocto] [OE-core] [PATCH 1/2] barebox: add initial support   Alexander Kanavin
      • [yocto] [OE-core] [PATCH 1/2] barebox: add initial support   Otavio Salvador
      • [yocto] [OE-core] [PATCH 1/2] barebox: add initial support   Enrico Jörns
      • [yocto] [OE-core] [PATCH 1/2] barebox: add initial support   Alexander Kanavin
• [PATCH] of: describe third arg of of_property_write_bool in kerneldoc   Ahmad Fatoum
  • [PATCH] of: describe third arg of of_property_write_bool in kerneldoc   Sascha Hauer
• [PATCH master] kwboot: add missing header to fix musl build   Ahmad Fatoum
  • [PATCH master] kwboot: add missing header to fix musl build   Marco Felsch
  • [PATCH master] kwboot: add missing header to fix musl build   Sascha Hauer
• [PATCH 1/1] serial: ns16550: move iomem/ioport init after clock init   Maxim Kochetkov
  • [PATCH 1/1] serial: ns16550: move iomem/ioport init after clock init   Ahmad Fatoum
    • [PATCH 1/1] serial: ns16550: move iomem/ioport init after clock init   Maxim Kochetkov
      • [PATCH 1/1] serial: ns16550: move iomem/ioport init after clock init   Ahmad Fatoum
• SPI NOR w25q128 "flash operation timed out"   Klotz, Oliver
  • SPI NOR w25q128 "flash operation timed out"   Ahmad Fatoum
• [PATCH 0/3] Fix MMC clocks on RK3568   Sascha Hauer
  • [PATCH 2/3] clk: composite: Fix enable_count when reparenting mux   Sascha Hauer
• [PATCH 1/3] clk: composite: Give mux/div/gate clks names   Sascha Hauer
• [PATCH 3/3] mci: rockchip-dwcmshc-sdhci: Print less errors   Sascha Hauer
• [PATCH] ARM: <asm/barebox-arm.h>: drop undefined barebox_arm_get_boarddata()   Ahmad Fatoum
  • [PATCH] ARM: <asm/barebox-arm.h>: drop undefined barebox_arm_get_boarddata()   Sascha Hauer
• [PATCH v2] Documentation: i.MX8M: add EVK barebox installation documentation   Ahmad Fatoum
  • [PATCH v2] Documentation: i.MX8M: add EVK barebox installation documentation   Sascha Hauer
• [PATCH v2 1/1] serial: ns16550: move iomem/ioport init after clock init   Maxim Kochetkov
  • [PATCH v2 1/1] serial: ns16550: move iomem/ioport init after clock init   Ahmad Fatoum
• [PATCH v3 1/1] serial: ns16550: move iomem/ioport init after clock init   Maxim Kochetkov
  • [PATCH v3 1/1] serial: ns16550: move iomem/ioport init after clock init   Ahmad Fatoum
  • [PATCH v3 1/1] serial: ns16550: move iomem/ioport init after clock init   Sascha Hauer
• [PATCH 0/1] STM32MP: protonic/phycore: warn about potential DT breakage   Ahmad Fatoum
• [PATCH 1/1] ARM: dts: STM32MP: protonic/phycore: add note about potential breakage   Ahmad Fatoum
• [PATCH 1/2] RISC-V: virt: riscvemu: use new-style DT overlay syntax   Ahmad Fatoum
  • [PATCH 1/2] RISC-V: virt: riscvemu: use new-style DT overlay syntax   Marco Felsch
    • [PATCH 1/2] RISC-V: virt: riscvemu: use new-style DT overlay syntax   Ahmad Fatoum
      • [PATCH 1/2] RISC-V: virt: riscvemu: use new-style DT overlay syntax   Marco Felsch
  • [PATCH 1/2] RISC-V: virt: riscvemu: use new-style DT overlay syntax   Sascha Hauer
• [PATCH 2/2] common: boards: qemu-virt: use new-style DT overlay syntax   Ahmad Fatoum
• [PATCH v1 00/20] dts: avoid DT breakage new fancy DTC v1.7.0 syntax   Ahmad Fatoum
  • [PATCH v1 01/20] scripts/dtc: Update to upstream version v1.7.0   Ahmad Fatoum
  • [PATCH v1 02/20] scripts/dtc: update-dts-source.sh: don't fail if libfdt/ exists   Ahmad Fatoum
  • [PATCH v1 03/20] Documentation: devicetree: describe new label-relative-path syntax   Ahmad Fatoum
  • [PATCH v1 04/20] ARM: dts: use DT labels instead of paths where possible   Ahmad Fatoum
  • [PATCH v1 05/20] MIPS: dts: ath79: ar9331: use path references when extending nodes   Ahmad Fatoum
    • [PATCH v1 05/20] MIPS: dts: ath79: ar9331: use path references when extending nodes   Sascha Hauer
  • [PATCH v1 06/20] ARM: dts: tegra: switch to path and label references   Ahmad Fatoum
  • [PATCH v1 08/20] ARM: i.MX6: gw54xx: rename watchdog nodes   Ahmad Fatoum
    • [PATCH v1 08/20] ARM: i.MX6: gw54xx: rename watchdog nodes   Jules Maselbas
  • [PATCH v1 09/20] ARM: i.MX6: karo-tx6x: fix now renamed DT nodes   Ahmad Fatoum
  • [PATCH v1 10/20] ARM: dts: zii: use phandle-relative paths for extending nodes   Ahmad Fatoum
  • [PATCH v1 11/20] ARM: dts: AT91: use label-relative paths for extending nodes   Ahmad Fatoum
  • [PATCH v1 12/20] ARM: dts: Layerscape: drop unneeded EEPROM node overriding   Ahmad Fatoum
  • [PATCH v1 14/20] ARM: dts: vf610-zii-cfu1: remove duplicate LED   Ahmad Fatoum
  • [PATCH v1 15/20] ARM: dts: i.MX53: ccxmx53: remove unused /memory   Ahmad Fatoum
  • [PATCH v1 16/20] ARM: dts: i.MX: use label-relative references   Ahmad Fatoum
  • [PATCH v1 17/20] ARM: dts: i.MX: delete now renamed memory nodes as well.   Ahmad Fatoum
  • [PATCH v1 20/20] ARM: dts: i.MX8MN: evk: reduce duplication in barebox-added nodes   Ahmad Fatoum
  • [PATCH v1 00/20] dts: avoid DT breakage new fancy DTC v1.7.0 syntax   Marco Felsch
    • [PATCH v1 00/20] dts: avoid DT breakage new fancy DTC v1.7.0 syntax   Ahmad Fatoum
  • [PATCH v1 00/20] dts: avoid DT breakage new fancy DTC v1.7.0 syntax   Sascha Hauer
• [PATCH v1 07/20] ARM: i.MX51: ccmx51: support newer device trees   Ahmad Fatoum
• [PATCH v1 13/20] ARM: dts: Layerscape: use label-relative paths references   Ahmad Fatoum
• [PATCH v1 18/20] ARM: dts: socfpga: cut down on NAND node duplication   Ahmad Fatoum
• [PATCH v1 19/20] ARM: dts: i.MX8MN: evk: use upstream flash node definition   Ahmad Fatoum
• [PATCH master] ARM: stm32mp: much enlarge very early stack size   Ahmad Fatoum
  • [PATCH master] ARM: stm32mp: much enlarge very early stack size   Sascha Hauer
• [PATCH] usb: misc: add support for new OF onboard hub binding   Ahmad Fatoum
  • [PATCH] usb: misc: add support for new OF onboard hub binding   Sascha Hauer
• [PATCH] commands: add new of_fixup command to list and disable DT fixups   Ahmad Fatoum
  • [PATCH] commands: add new of_fixup command to list and disable DT fixups   Sascha Hauer
• [PATCH 1/2] gen-dtb-s: reference OF IMD entries automatically   Ahmad Fatoum
  • [PATCH 2/2] treewide: remove no-longer needed IMD_USED_OF   Ahmad Fatoum
    • [PATCH 2/2] treewide: remove no-longer needed IMD_USED_OF   Marco Felsch
  • [PATCH 1/2] gen-dtb-s: reference OF IMD entries automatically   Sascha Hauer
• [PATCH RESEND] test: include <linux/printk.h>   Ahmad Fatoum
  • [PATCH RESEND] test: include <linux/printk.h>   Sascha Hauer
• [PATCH 1/3] gio: add support for PCAL6408 chip to the pca953x driver   Michael Kopfensteiner
  • [PATCH 2/3] ARM: IMX8MP: add initial support for Variscite DT8MCustomBoard with iMX8MP   Michael Kopfensteiner
    • [PATCH 2/3] ARM: IMX8MP: add initial support for Variscite DT8MCustomBoard with iMX8MP   Sascha Hauer
      • [PATCH 2/3] ARM: IMX8MP: add initial support for Variscite DT8MCustomBoard with iMX8MP   Kopfensteiner_Michael
      • [PATCH 2/3] ARM: IMX8MP: add initial support for Variscite DT8MCustomBoard with iMX8MP   Sascha Hauer
    • [PATCH 2/3] ARM: IMX8MP: add initial support for Variscite DT8MCustomBoard with iMX8MP   Sascha Hauer
  • [PATCH 3/3] Documentation: IMX: add doc for the Variscite DT8MCustomBoard   Michael Kopfensteiner
• [PATCH master] sandbox: fix linker warnings with newer ld   Ahmad Fatoum
  • [PATCH master] sandbox: fix linker warnings with newer ld   Sascha Hauer
• [PATCH master 1/2] of: split part of of_get_stdoutpath into of_find_node_by_chosen   Ahmad Fatoum
  • [PATCH master 2/2] bootsource: use /chosen instead of /aliases/barebox,bootsource-   Ahmad Fatoum
  • [PATCH master 1/2] of: split part of of_get_stdoutpath into of_find_node_by_chosen   Sascha Hauer
• [PATCH] ARM: rockchip: add missing header to <mach/rockchip.h>   Ahmad Fatoum
  • [PATCH] ARM: rockchip: add missing header to <mach/rockchip.h>   Sascha Hauer
• [PATCH] treewide: rename leftover device_d   Ahmad Fatoum
  • [PATCH] treewide: rename leftover device_d   Ahmad Fatoum
    • [PATCH] treewide: rename leftover device_d   Sascha Hauer
  • [PATCH] treewide: rename leftover device_d   Marco Felsch
• [PATCH RFC 00/12] ARM64: layerscape: make LS1046 DMA coherent   Ahmad Fatoum
  • [PATCH RFC 03/12] net: rtl8169: pass physical device for DMA API   Ahmad Fatoum
  • [PATCH RFC 05/12] net: designware: eqos: pass physical device to DMA API   Ahmad Fatoum
  • [PATCH RFC 09/12] of: populate new device_d::dma_coherent attribute   Ahmad Fatoum
    • [PATCH RFC 09/12] of: populate new device_d::dma_coherent attribute   Sascha Hauer
  • [PATCH RFC 11/12] dma: provide of_dma_coherent_fixup helper   Ahmad Fatoum
• [PATCH RFC 01/12] usb: dwc3: populate parent of xHCI dev   Ahmad Fatoum
• [PATCH RFC 02/12] usb: xhci: pass physical device to DMA API   Ahmad Fatoum
• [PATCH RFC 04/12] firmware: zynqmp-fpga: pass physical device to DMA API   Ahmad Fatoum
• [PATCH RFC 06/12] x86: select OF_DMA_DEFAULT_COHERENT   Ahmad Fatoum
• [PATCH RFC 07/12] dma: define CONFIG_OF_DMA_COHERENCY   Ahmad Fatoum
• [PATCH RFC 08/12] RISC-V: StarFive: J7100: set /soc/dma-noncoherent   Ahmad Fatoum
• [PATCH RFC 10/12] dma: fix dma_sync when not all device DMA is equally coherent   Ahmad Fatoum
• [PATCH RFC 12/12] ARM64: layerscape: configure all DMA masters to be cache-coherent   Ahmad Fatoum
• [PATCH] sandbox: Fix fixing linker warnings with newer ld   Sascha Hauer
  • [PATCH] sandbox: Fix fixing linker warnings with newer ld   Ahmad Fatoum
    • [PATCH] sandbox: Fix fixing linker warnings with newer ld   Sascha Hauer
• [PATCH] net: make DRIVER_NET_DESIGNWARE_IMX8 select MFD_SYSCON   Bastian Krause
  • [PATCH] net: make DRIVER_NET_DESIGNWARE_IMX8 select MFD_SYSCON   Ahmad Fatoum
  • [PATCH] net: make DRIVER_NET_DESIGNWARE_IMX8 select MFD_SYSCON   Sascha Hauer
• v2023.02.0   Sascha Hauer
  • v2023.02.0   Sascha Hauer
    • v2023.02.0   Sascha Hauer
• [PATCH] of: Fix of_get_stdoutpath() when property does not contain a colon   Sascha Hauer
• [PATCH master] of: base: Fix of_get_stdoutpath() when property does not contain a colon   Ahmad Fatoum
• Subject: [PATCH V2 0/2] ARM: Layerscape: Add LS1021A IOT board support   Renaud Barbier
• Subject: [PATCH 1/2] ARM: add LS1021A to Layerscape machine support   Renaud Barbier
  • Subject: [PATCH 1/2] ARM: add LS1021A to Layerscape machine support   Sascha Hauer
• Subject: [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support   Renaud Barbier
  • Subject: [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support   Sascha Hauer
    • Subject: [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support   Renaud Barbier
      • Subject: [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support   Sascha Hauer
• v2023.02.1   Sascha Hauer
• [PATCH v2 1/3] gio: add support for PCAL6408 chip to the pca953x driver   Michael Kopfensteiner
  • [PATCH v2 2/3] ARM: IMX8MP: add initial support for Variscite DT8MCustomBoard with iMX8MP   Michael Kopfensteiner
    • [PATCH v2 2/3] ARM: IMX8MP: add initial support for Variscite DT8MCustomBoard with iMX8MP   Sascha Hauer
  • [PATCH v2 3/3] Documentation: IMX: add doc for the Variscite DT8MCustomBoard   Michael Kopfensteiner
• [RFC 0/2] dma: clean up streaming DMA API   Denis Orlov
  • [RFC 1/2] dma: rework dma_sync_single interface   Denis Orlov
  • [RFC 2/2] dma: update dma_sync_single uses in drivers   Denis Orlov
• [PATCH 0/5] ARM: remove Samsung arch   Sascha Hauer
  • [PATCH 1/5] ARM: remove samsung arch   Sascha Hauer
  • [PATCH 2/5] mci: remove s3c driver   Sascha Hauer
  • [PATCH 3/5] mtd: nand: remove s3c driver   Sascha Hauer
  • [PATCH 5/5] video: remove s3c driver   Sascha Hauer
  • [PATCH 0/5] ARM: remove Samsung arch   Marco Felsch
• [PATCH 4/5] serial: remove s3c driver   Sascha Hauer
• [PATCH 0/9] ARM: misc cleanups   Sascha Hauer
  • [PATCH 3/9] ARM: rockchip: drop mach/timer.h   Sascha Hauer
  • [PATCH 4/9] ARM: i.MX: Move imxfb.h to include/platform_data/   Sascha Hauer
  • [PATCH 6/9] ARM: at91: remove unnecessary configs   Sascha Hauer
  • [PATCH 7/9] ARM: at91: Switch all boards to multiimage   Sascha Hauer
  • [PATCH 8/9] at91: consolidate usb-a963 128m images   Sascha Hauer
  • [PATCH 9/9] ARM: pxa: Move plat/ include files to mach/   Sascha Hauer
  • [PATCH 0/9] ARM: misc cleanups   Sam Ravnborg
    • [PATCH 0/9] ARM: misc cleanups   Sascha Hauer
• [PATCH 1/9] ARM: mxs: remove unused mach/clock.h   Sascha Hauer
• [PATCH 2/9] ARM: imx: remove unused mach/clock.h   Sascha Hauer
• [PATCH 5/9] pinctrl: rockchip: Fix uninitialized var warning   Sascha Hauer

Last message date: Tue Feb 28 23:53:24 PST 2023
Archived on: Tue Feb 28 23:53:32 PST 2023

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...