[PATCH 0/2] Initial LS1021-IOT board support

[Ahmad Fatoum]

Hello Renaud,

On 10.02.23 16:57, Renaud Barbier wrote:
> What about soc/fsl/immap_lsch2.h vs soc/fsl/immap_ls102xa.h.
> Lots of similarities but also a lots of differences (when excluding the prefix LSCH2 and LS102XA)
> Can I assume ccsr_scfg can be mapped to each other?
> May be a question to NXP.

Preferably, you'd use the already defined macros and for stuff where
LS102x differs, you'd add a prefix, e.g. struct ls102x_ccsr_scfg.

The goal should be to have as little duplication as possible
and still be able to compile a file that includes both
headers without them clashing.

Cheers,
Ahmad

> 
> 
>> -----Original Message-----
>> From: Sascha Hauer <sha at pengutronix.de>
>> Sent: 10 February 2023 12:26
>> To: Renaud Barbier <Renaud.Barbier at ametek.com>
>> Cc: Barebox List <barebox at lists.infradead.org>
>> Subject: Re: [PATCH 0/2] Initial LS1021-IOT board support
>>
>> ***NOTICE*** This came from an external source. Use caution when
>> replying, clicking links, or opening attachments.
>>
>> On Fri, Feb 10, 2023 at 11:54:31AM +0000, Renaud Barbier wrote:
>>> I have not tried yet. I was not sure if you like to have separate machine
>> support as there are some differences in the SOC .
>>>
>>> I will merge it and send you a new patch.
>>
>> I like it better when it's merged, eventhough it's never compiled together as
>> they are different compiler architectures.
>>
>> Sascha
>>
>>>
>>>> -----Original Message-----
>>>> From: Sascha Hauer <sha at pengutronix.de>
>>>> Sent: 10 February 2023 11:26
>>>> To: Renaud Barbier <Renaud.Barbier at ametek.com>
>>>> Cc: Barebox List <barebox at lists.infradead.org>
>>>> Subject: Re: [PATCH 0/2] Initial LS1021-IOT board support
>>>>
>>>> ***NOTICE*** This came from an external source. Use caution when
>>>> replying, clicking links, or opening attachments.
>>>>
>>>> On Wed, Feb 08, 2023 at 01:26:21PM +0000, Renaud Barbier wrote:
>>>>> The LS1021A-IOT is NXP ARMv7 Layerscape evaluation board.
>>>>>
>>>>> These patches provide a basic board support with:
>>>>>       - UART
>>>>>       - boot from SPI
>>>>>       - One Ethernet port - eth1*
>>>>>
>>>>> The content of the EEPROM having been lost so the MAC should be
>>>>> set in the config file
>>>>>
>>>>> The code is ported from NXP U-boot 2021-04. Like U-boot, the
>>>>> machine support i.e mac-lxxx lives in its own directory. However,
>>>>> it is very similar to the ls1046a machine support. This migth be
>>>>> merged. Please
>>>> advise.
>>>>
>>>> It would be nice to have this merged to arch/arm/mach-layerscape.
>>>> For example arch/arm/mach-layerscape/pblimage.c looks identical to
>>>> your version.
>>>>
>>>> Have you tried merging it? If yes, which problems did you encounter?
>>>>
>>>> Sascha
>>>>
>>>> --
>>>> Pengutronix e.K.                           |                             |
>>>> Steuerwalder Str. 21                       |
>>>>
>> https://urldefense.com/v3/__http://www.pengutronix.de/__;!!HKOSU0g!C
>>>> ZdG8RU9gQpSVfJzH_T4b8q5lFRdLrpGiJsD5H-
>>>> H351N8ycvCriKuoi6quenVmESFrbU0Iw9qhIlb5z4ifTE$   |
>>>> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
>>>> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
>>>
>>
>> --
>> Pengutronix e.K.                           |                             |
>> Steuerwalder Str. 21                       |
>> https://urldefense.com/v3/__http://www.pengutronix.de/__;!!HKOSU0g!G
>> os0mqldKVyCzyhvalaS58FEkUQ1osWODWWtH0-
>> MC4aIxC0d2rtcUzK3DWcfHooti_U0whPPLXjo8H3Xl87E$   |
>> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
>> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |