[PATCH] clk: imx8mp: add USB suspend clock

Sascha Hauer sha at pengutronix.de
Sun Feb 5 23:41:40 PST 2023


On Fri, Feb 03, 2023 at 10:07:22AM +0100, Lucas Stach wrote:
> Am Freitag, dem 03.02.2023 um 08:55 +0100 schrieb Sascha Hauer:
> > On Thu, Feb 02, 2023 at 01:05:24PM +0100, Lucas Stach wrote:
> > > Linux added another USB clock to properly describe the controller root
> > > and suspend clocks. As new DTs are using this clock to keep the shared
> > > gate enabled, access to the USB controller will hang Barebox without
> > > support for this clock.
> > > 
> > > Fixes: 0d682a2997a8 ("dts: update to v6.2-rc5")
> > > Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
> > > ---
> > >  drivers/clk/imx/clk-imx8mp.c | 3 ++-
> > >  1 file changed, 2 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
> > > index a1611be1833e..40578c2a4bd6 100644
> > > --- a/drivers/clk/imx/clk-imx8mp.c
> > > +++ b/drivers/clk/imx/clk-imx8mp.c
> > > @@ -665,7 +665,8 @@ static int imx8mp_clocks_init(struct device_node *ccm_np)
> > >  	hws[IMX8MP_CLK_UART2_ROOT] = imx_clk_hw_gate4("uart2_root_clk", "uart2", ccm_base + 0x44a0, 0);
> > >  	hws[IMX8MP_CLK_UART3_ROOT] = imx_clk_hw_gate4("uart3_root_clk", "uart3", ccm_base + 0x44b0, 0);
> > >  	hws[IMX8MP_CLK_UART4_ROOT] = imx_clk_hw_gate4("uart4_root_clk", "uart4", ccm_base + 0x44c0, 0);
> > > -	hws[IMX8MP_CLK_USB_ROOT] = imx_clk_hw_gate4("usb_root_clk", "osc_32k", ccm_base + 0x44d0, 0);
> > > +	hws[IMX8MP_CLK_USB_ROOT] = imx_clk_hw_gate2_shared2("usb_root_clk", "hsio_axi", ccm_base + 0x44d0, 0);
> > > +	hws[IMX8MP_CLK_USB_SUSP] = imx_clk_hw_gate2_shared2("usb_suspend_clk", "osc_32k", ccm_base + 0x44d0, 0);
> > 
> > Do old dts files work with this change? In other words, can I apply this
> > directly to master or do I have to squash this change into the commit
> > that changes imx8mp.dtsi to use this clock?
> > 
> As the old clock ID is still supported from the clock driver after this
> change and operates the same gate, it should be fine to apply this
> patch to master.

Ok, just did that.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the barebox mailing list