[PATCH] clk: imx8mp: add USB suspend clock

[Lucas Stach]

Am Freitag, dem 03.02.2023 um 08:55 +0100 schrieb Sascha Hauer:
> On Thu, Feb 02, 2023 at 01:05:24PM +0100, Lucas Stach wrote:
> > Linux added another USB clock to properly describe the controller root
> > and suspend clocks. As new DTs are using this clock to keep the shared
> > gate enabled, access to the USB controller will hang Barebox without
> > support for this clock.
> > 
> > Fixes: 0d682a2997a8 ("dts: update to v6.2-rc5")
> > Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
> > ---
> >  drivers/clk/imx/clk-imx8mp.c | 3 ++-
> >  1 file changed, 2 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
> > index a1611be1833e..40578c2a4bd6 100644
> > --- a/drivers/clk/imx/clk-imx8mp.c
> > +++ b/drivers/clk/imx/clk-imx8mp.c
> > @@ -665,7 +665,8 @@ static int imx8mp_clocks_init(struct device_node *ccm_np)
> >  	hws[IMX8MP_CLK_UART2_ROOT] = imx_clk_hw_gate4("uart2_root_clk", "uart2", ccm_base + 0x44a0, 0);
> >  	hws[IMX8MP_CLK_UART3_ROOT] = imx_clk_hw_gate4("uart3_root_clk", "uart3", ccm_base + 0x44b0, 0);
> >  	hws[IMX8MP_CLK_UART4_ROOT] = imx_clk_hw_gate4("uart4_root_clk", "uart4", ccm_base + 0x44c0, 0);
> > -	hws[IMX8MP_CLK_USB_ROOT] = imx_clk_hw_gate4("usb_root_clk", "osc_32k", ccm_base + 0x44d0, 0);
> > +	hws[IMX8MP_CLK_USB_ROOT] = imx_clk_hw_gate2_shared2("usb_root_clk", "hsio_axi", ccm_base + 0x44d0, 0);
> > +	hws[IMX8MP_CLK_USB_SUSP] = imx_clk_hw_gate2_shared2("usb_suspend_clk", "osc_32k", ccm_base + 0x44d0, 0);
> 
> Do old dts files work with this change? In other words, can I apply this
> directly to master or do I have to squash this change into the commit
> that changes imx8mp.dtsi to use this clock?
> 
As the old clock ID is still supported from the clock driver after this
change and operates the same gate, it should be fine to apply this
patch to master.

Regards,
Lucas