[PATCH RFC 05/12] net: designware: eqos: pass physical device to DMA API

[Ahmad Fatoum]

The Ethernet interface device is just a child of the physical device with
no DT node assigned. As such, it lacks all DMA settings that may be
set in the DT. Fix this by using the hardware device instead.

Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
 drivers/net/designware_eqos.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/designware_eqos.c b/drivers/net/designware_eqos.c
index ee5a10a007e9..2e2a1cf8bff3 100644
--- a/drivers/net/designware_eqos.c
+++ b/drivers/net/designware_eqos.c
@@ -687,7 +687,6 @@ static void eqos_stop(struct eth_device *edev)
 static int eqos_send(struct eth_device *edev, void *packet, int length)
 {
 	struct eqos *eqos = edev->priv;
-	struct device *dev = &eqos->netdev.dev;
 	struct eqos_desc *tx_desc;
 	dma_addr_t dma;
 	u32 des3;
@@ -697,8 +696,8 @@ static int eqos_send(struct eth_device *edev, void *packet, int length)
 	eqos->tx_currdescnum++;
 	eqos->tx_currdescnum %= EQOS_DESCRIPTORS_TX;
 
-	dma = dma_map_single(dev, packet, length, DMA_TO_DEVICE);
-	if (dma_mapping_error(dev, dma))
+	dma = dma_map_single(edev->parent, packet, length, DMA_TO_DEVICE);
+	if (dma_mapping_error(edev->parent, dma))
 		return -EFAULT;
 
 	tx_desc->des0 = (unsigned long)dma;
@@ -717,7 +716,7 @@ static int eqos_send(struct eth_device *edev, void *packet, int length)
 				  !(des3 & EQOS_DESC3_OWN),
 				  100 * USEC_PER_MSEC);
 
-	dma_unmap_single(dev, dma, length, DMA_TO_DEVICE);
+	dma_unmap_single(edev->parent, dma, length, DMA_TO_DEVICE);
 
 	if (ret == -ETIMEDOUT)
 		eqos_dbg(eqos, "TX timeout\n");
@@ -764,7 +763,7 @@ static int eqos_recv(struct eth_device *edev)
 
 static int eqos_init_resources(struct eqos *eqos)
 {
-	struct device *dev = eqos->netdev.parent;
+	struct eth_device *edev = &eqos->netdev;
 	int ret = -ENOMEM;
 	void *descs;
 	void *p;
@@ -785,8 +784,8 @@ static int eqos_init_resources(struct eqos *eqos)
 		struct eqos_desc *rx_desc = &eqos->rx_descs[i];
 		dma_addr_t dma;
 
-		dma = dma_map_single(dev, p, EQOS_MAX_PACKET_SIZE, DMA_FROM_DEVICE);
-		if (dma_mapping_error(dev, dma)) {
+		dma = dma_map_single(edev->parent, p, EQOS_MAX_PACKET_SIZE, DMA_FROM_DEVICE);
+		if (dma_mapping_error(edev->parent, dma)) {
 			ret = -EFAULT;
 			goto err_free_rx_bufs;
 		}
-- 
2.30.2