[PATCH v2 2/2] usb: dwc2: fix multiplier handling in endpoint setup

[Ahmad Fatoum]

On 24.01.23 21:01, Michael Grzeschik wrote:
> If the multiplier is 0 in the descriptor bitfield the multiplier count
> is one. For calculating the multiplier count the extra function
> usb_endpoint_maxp_mult should be used. Rework the dwc2 driver to use it
> and make multi packages work.
> 
> While at it, we also remove the USB_EP_MAXP_MULT and
> USB_ENDPOINT_MAXP_MASK macros that would stay left unused and are
> defined in include/usb/ch9.ch anyway.
> 
> Tested-by: Jules Maselbas <jmaselbas at kalray.eu>
> Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>

This induces the same breakage as in v1, even a simple ACM gadget
fails:

  barebox at Linux Automation Test Automation Controller (TAC):/ usbgadget -a
  udc0: registering UDC driver [g_multi]
  multi_bind: creating ACM function
  g_multi usbgadget: Multifunction Composite Gadget
  g_multi usbgadget: g_multi ready
  dwc2 49000000.usb-otg at 49000000.of: bound driver g_multi
  dwc2 49000000.usb-otg at 49000000.of: new address 3
  g_multi usbgadget: high-speed config #1: Multifunction Composite Gadget
  ERROR: dwc2 49000000.usb-otg at 49000000.of: dwc2_ep_enable: No suitable fifo found


The other patch while maybe applicable to the kernel, doesn't do anything
for barebox. Please test barebox patches in barebox for v3.

@Sascha, can you drop this series from next?

Cheers,
Ahmad

> ---
> v1 -> v2: - added tested-by
> 
>  drivers/usb/dwc2/gadget.c | 9 +--------
>  1 file changed, 1 insertion(+), 8 deletions(-)
> 
> diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
> index 7070485410..5a72ba795b 100644
> --- a/drivers/usb/dwc2/gadget.c
> +++ b/drivers/usb/dwc2/gadget.c
> @@ -14,13 +14,6 @@
>  #define spin_lock_irqsave(lock, flags) (void)(flags)
>  #define spin_unlock_irqrestore(lock, flags) (void)(flags)
>  
> -#ifndef USB_ENDPOINT_MAXP_MASK
> -#define USB_ENDPOINT_MAXP_MASK	0x07ff
> -#endif
> -#ifndef USB_EP_MAXP_MULT
> -#define USB_EP_MAXP_MULT(m)	(((m) & 0x1800) >> 11)
> -#endif
> -
>  static void kill_all_requests(struct dwc2 *, struct dwc2_ep *, int);
>  
>  static inline struct dwc2_ep *index_to_ep(struct dwc2 *dwc2,
> @@ -484,7 +477,7 @@ static int dwc2_ep_enable(struct usb_ep *ep,
>  
>  	ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
>  	mps = usb_endpoint_maxp(desc) & USB_ENDPOINT_MAXP_MASK;
> -	mc =  USB_EP_MAXP_MULT(usb_endpoint_maxp(desc));
> +	mc = usb_endpoint_maxp_mult(desc);
>  
>  	/* note, we handle this here instead of dwc2_set_ep_maxpacket */
>  	epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |