[PATCH 0/2] Initial LS1021-IOT board support
Renaud.Barbier at ametek.com
Fri Feb 10 03:54:31 PST 2023
I have not tried yet. I was not sure if you like to have separate machine support as there are some differences in the SOC .
I will merge it and send you a new patch.
> -----Original Message-----
> From: Sascha Hauer <sha at pengutronix.de>
> Sent: 10 February 2023 11:26
> To: Renaud Barbier <Renaud.Barbier at ametek.com>
> Cc: Barebox List <barebox at lists.infradead.org>
> Subject: Re: [PATCH 0/2] Initial LS1021-IOT board support
> ***NOTICE*** This came from an external source. Use caution when
> replying, clicking links, or opening attachments.
> On Wed, Feb 08, 2023 at 01:26:21PM +0000, Renaud Barbier wrote:
> > The LS1021A-IOT is NXP ARMv7 Layerscape evaluation board.
> > These patches provide a basic board support with:
> > - UART
> > - boot from SPI
> > - One Ethernet port - eth1*
> > The content of the EEPROM having been lost so the MAC should be set in
> > the config file
> > The code is ported from NXP U-boot 2021-04. Like U-boot, the machine
> > support i.e mac-lxxx lives in its own directory. However, it is very
> > similar to the ls1046a machine support. This migth be merged. Please
> It would be nice to have this merged to arch/arm/mach-layerscape. For
> example arch/arm/mach-layerscape/pblimage.c looks identical to your
> Have you tried merging it? If yes, which problems did you encounter?
> Pengutronix e.K. | |
> Steuerwalder Str. 21 |
> H351N8ycvCriKuoi6quenVmESFrbU0Iw9qhIlb5z4ifTE$ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox