[PATCH 0/2] Initial LS1021-IOT board support

[Sascha Hauer]

On Wed, Feb 08, 2023 at 01:26:21PM +0000, Renaud Barbier wrote:
> The LS1021A-IOT is NXP ARMv7 Layerscape evaluation board.
> 
> These patches provide a basic board support with:
> 	- UART
> 	- boot from SPI
> 	- One Ethernet port - eth1*
> 
> The content of the EEPROM having been lost so the MAC should be set in the
> config file
> 
> The code is ported from NXP U-boot 2021-04. Like U-boot, the machine support
> i.e mac-lxxx lives in its own directory. However, it is very similar to the 
> ls1046a machine support. This migth be merged. Please advise.

It would be nice to have this merged to arch/arm/mach-layerscape. For
example arch/arm/mach-layerscape/pblimage.c looks identical to your
version.

Have you tried merging it? If yes, which problems did you encounter?

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |