February 2013 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Feb 1 02:45:21 EST 2013
Ending: Thu Feb 28 15:05:02 EST 2013
Messages: 806

• make mrproper depends on a .config file?   Alexander Aring
• the different between getopt and getopts   Alexander Aring
• [PATCH 2/3] mxs_spi: initial commit   Alexander Aring
• [PATCH 2/3] mxs_spi: initial commit   Alexander Aring
• [PATCH 2/3] mxs_spi: initial commit   Alexander Aring
• [PATCH v2 2/3] SPI: Add i.MX 23/28 SPI driver support   Alexander Aring
• [PATCH 3/3] sama5d3: detect boot mode   Alexander Aring
• [PATCH v3 0/6] add new memtest command   Alexander Aring
• [PATCH 1/6] common: fix codestyle in ALIGN macros   Alexander Aring
• [PATCH 2/6] common: add ALIGN_DOWN macro   Alexander Aring
• [PATCH 3/6] memory: add function address_in_sdram_regions   Alexander Aring
• [PATCH 4/6] memtest: remove memtest command   Alexander Aring
• [PATCH 5/6] common: add mem_test routine   Alexander Aring
• [PATCH 6/6] commands: add new memtest command   Alexander Aring
• [PATCH 5/6] common: add mem_test routine   Alexander Aring
• [PATCH 6/6] commands: add new memtest command   Alexander Aring
• [PATCH 5/6] common: add mem_test routine   Alexander Aring
• [PATCH 5/6] common: add mem_test routine   Alexander Aring
• [PATCH 6/6] commands: add new memtest command   Alexander Aring
• [PATCH 0/4] Small fixes in barebox   Alexander Aring
• [PATCH 1/4] hush: add getopt only if it enabled   Alexander Aring
• [PATCH 2/4] getopt: change optstring to const char*   Alexander Aring
• [PATCH 3/4] sata-imx: fix depends on ARCH_IMX   Alexander Aring
• [PATCH 4/4] net: fix cpsw depends on ARCH_OMAP   Alexander Aring
• [PATCH 4/4] net: fix cpsw depends on ARCH_OMAP   Alexander Aring
• [PATCH v2 0/4] Small fixes in barebox   Alexander Aring
• [PATCH 1/4] hush: add getopt only if it enabled   Alexander Aring
• [PATCH 2/4] getopt: change optstring to const char*   Alexander Aring
• [PATCH 3/4] sata-imx: fix depends on ARCH_IMX   Alexander Aring
• [PATCH 4/4] net: fix cpsw depends on ARCH_OMAP   Alexander Aring
• [PATCH 0/4] Small fixes in barebox   Alexander Aring
• [PATCH 0/4] Small fixes in barebox   Alexander Aring
• [PATCH 2/2] miitool: Add support for examing mdio bus   Alexander Aring
• [PATCH 6/7] macb: fix tx ring size   Alexander Aring
• [PATCH] net: CPSW: Fix non-OMAP barebox building with DRIVER_NET_CPSW option   Alexander Aring
• [PATCH 2/2] miitool: Add support for examing mdio bus   Alexander Aring
• [PATCH] ARM pbl: move piggydata before bss   Alexander Aring
• [PATCH 1/4] fs: fix return type of read   Alexander Aring
• [PATCH 2/4] fs: add pread and pwrite functions   Alexander Aring
• [PATCH 3/4] nandtest: use new pread and pwrite functions   Alexander Aring
• [PATCH 4/4] nandtest: fix length calculation   Alexander Aring
• [PATCH 2/4] fs: add pread and pwrite functions   Alexander Aring
• [PATCH] nor flash: integrate into mtd   Alexander Aring
• [RFC PATCH v2 0/2] fs: add pread and pwrite functions   Alexander Aring
• [PATCH 1/2] fs: fix return type of read   Alexander Aring
• [PATCH 2/2] fs: add pread and pwrite functions   Alexander Aring
• [PATCH 2/2] fs: add pread and pwrite functions   Alexander Aring
• [PATCH] nor flash: integrate into mtd   Alexander Aring
• [PATCH 2/2] fs: add pread and pwrite functions   Alexander Aring
• [PATCH 1/2] nandtest: use new pread and pwrite functions   Alexander Aring
• [PATCH 2/2] nandtest: fix length calculation   Alexander Aring
• [PATCH 1/2] nandtest: use new pread and pwrite functions   Alexander Aring
• [PATCH v2 next 1/2] defenv2: comment setting default values in /env/config   Alexander Aring
• [PATCH v2 next 1/2] defenv2: comment setting default values in /env/config   Alexander Aring
• [PATCH 13/29] of: make flatten independent of libfdt   Alexander Aring
• [PATCH 13/29] of: make flatten independent of libfdt   Alexander Aring
• RFC, i.MX28 related   Juergen Beisert
• [PATCH 1/2] cfa-10036: Use the second MMC partition to store the environment   Juergen Beisert
• [PATCH] arm/i.M23/chumbyfalconwing: just fix a typo   Juergen Beisert
• [PATCH v2] arm/i.M23/chumbyfalconwing: just fix a typo   Juergen Beisert
• [PATCH 3/3] falconwing: switch to generic peristent env   Juergen Beisert
• [PATCH] ArchosG9: solve regression in second stage lowlevel init   Vicente Bergas
• [PATCH] DeviceTree: add support for initrd in the DT   Vicente Bergas
• [PATCH 0/2] DeviceTree: add support for initrd in the DT   Vicente Bergas
• [PATCH 1/2] DeviceTree: add support for initrd in the DT   Vicente Bergas
• [PATCH 2/2] ArchosG9: boot linux kernel with DT   Vicente Bergas
• [PATCH 0/2] Summary of last patches submitted   Vicente Bergas
• [PATCH 1/2] ArchosG9: solve regression in second stage lowlevel init   Vicente Bergas
• [PATCH 2/2] DeviceTree: add support for initrd in the DT   Vicente Bergas
• [PATCH] OMAP4 USB BOOT: remove double line endings   Vicente Bergas
• Lost access to M25Pxx in move to 2013.01   Eric Bénard
• [PATCH 1/3] mx23-evk: fix MCI support   Eric Bénard
• [PATCH 2/3] mx23-evk: add USB gadget support   Eric Bénard
• [PATCH 3/3] mx23-evk: update defconfig   Eric Bénard
• [PATCH 1/2] cfa-10036: Use the second MMC partition to store the environment   Eric Bénard
• [PATCH 1/2] cfa-10036: Use the second MMC partition to store the environment   Eric Bénard
• [PATCH 1/3] env: add register_persistent_environment   Eric Bénard
• [PATCH 2/3] imx23-olinuxino: swith to generic peristent env   Eric Bénard
• [PATCH 3/3] falconwing: switch to generic peristent env   Eric Bénard
• [PATCH v2] falconwing: switch to generic peristent env   Eric Bénard
• [PATCH v3] falconwing: switch to generic peristent env   Eric Bénard
• [PATCH v4 1/3] env: add register_persistent_environment   Eric Bénard
• [PATCH v4 2/3] imx23-olinuxino: swith to generic peristent env   Eric Bénard
• [PATCH v4 3/3] falconwing: switch to generic peristent env   Eric Bénard
• [PATCH v4 1/3] env: add register_persistent_environment   Eric Bénard
• [PATCH v4 1/3] env: add register_persistent_environment   Eric Bénard
• [PATCH v4 1/3] env: add register_persistent_environment   Eric Bénard
• [PATCH v4 1/3] env: add register_persistent_environment   Eric Bénard
• [PATCH] addpart: size and offset not needed for already defined partitions   Carlo Caione
• Shipping Service   Manager Alexander Cooke
• [PATCH 1/1] commands/ubi.c: Add support for VID header offset in ubiattach   Xavier Douville
• [PATCH 1/1] commands/ubi.c: Add support for VID header offset in ubiattach   Xavier Douville
• [PATCH] Do not print error message when successfully attaching more than one UBI device   Xavier Douville
• [PATCH 1/1] commands/ubi.c: Add support for VID header offset in ubiattach   Xavier Douville
• [PATCH 1/1] commands/ubi.c: Add support for VID header offset in ubiattach   Xavier Douville
• [For master PATCH 1/1] sama5de3k: add gmacb support   Nicolas Ferre
• [For master PATCH 0/7] macb: more fixes + gem (gigabit support)   Nicolas Ferre
• [RFC PATCH] ARM i.MX6: Add support for SabreSD board   Hubert Feurstein
• [RFC PATCH] ARM i.MX6: Add support for SabreSD board   Hubert Feurstein
• [PATCH] net fec_imx: add support for i.MX6 1000Mbps mode   Hubert Feurstein
• [PATCH] ARM i.MX6: Add support for SabreSD board   Hubert Feurstein
• [PATCH] net fec_imx: add support for i.MX6 1000Mbps mode   Hubert Feurstein
• [PATCH v2] ARM i.MX6: Add support for SabreSD board   Hubert Feurstein
• [PATCH v2] ARM i.MX6: Add support for SabreSD board   Hubert Feurstein
• [PATCH] imx_spi: fix bus-num setup   Hubert Feurstein
• [PATCH 1/2] net: fec_imx: ensure constant timeout in fec_halt   Hubert Feurstein
• [PATCH 2/2] net: imx_fec: fix RMII support for i.MX6   Hubert Feurstein
• [PATCH 1/2] net: fec_imx: use dev_err and dev_warn instead of printf   Hubert Feurstein
• [PATCH 2/2] net: fec_imx: ensure constant timeout in fec_halt   Hubert Feurstein
• [PATCH 0/3] Add mxs spi driver and mx28evk as its first user   Michael Grzeschik
• [PATCH 1/3] mxs: ssp move to common register layout   Michael Grzeschik
• [PATCH 2/3] mxs_spi: initial commit   Michael Grzeschik
• [PATCH 2/3] mxs_spi: initial commit   Michael Grzeschik
• [PATCH 2/3] mxs_spi: initial commit   Michael Grzeschik
• [PATCH 0/3] Add mxs spi driver and mx28evk as its first user   Michael Grzeschik
• [PATCH 1/3] mxs: ssp move to common register layout   Michael Grzeschik
• [PATCH 2/3] mxs_spi: initial commit   Michael Grzeschik
• [PATCH 3/3] mx28evk: add m25p80 flash via ssp2   Michael Grzeschik
• [PATCH v2 0/3] Add mxs spi driver and mx28evk as its first user   Michael Grzeschik
• [PATCH v2 1/3] ARM mxs: ssp move to common register layout   Michael Grzeschik
• [PATCH v2 2/3] SPI: Add i.MX 23/28 SPI driver support   Michael Grzeschik
• [PATCH v2 3/3] mx28evk: add m25p80 flash via ssp2   Michael Grzeschik
• [PATCH v2 2/3] SPI: Add i.MX 23/28 SPI driver support   Michael Grzeschik
• [PATCH v3 0/3] Add mxs spi driver and mx28evk as its first user   Michael Grzeschik
• [PATCH v3 1/3] ARM mxs: ssp move to common register layout   Michael Grzeschik
• [PATCH v3 2/3] SPI: Add i.MX 23/28 SPI driver support   Michael Grzeschik
• [PATCH v3 3/3] mx28evk: add m25p80 flash via ssp2   Michael Grzeschik
• [PATCH v2] Add new ARM entry point for barebox   Sascha Hauer
• [PATCH 01/34] ARM: Add new entry point for barebox   Sascha Hauer
• [PATCH 02/34] ARM: add __noreturn to board_init_lowlevel_return   Sascha Hauer
• [PATCH 03/34] ARM i.MX: Use SRAM stack in lowlevel code   Sascha Hauer
• [PATCH 04/34] ARM i.MX: Add i.MX specific entry point for barebox   Sascha Hauer
• [PATCH 05/34] ARM i.MX: prepare external nand boot for SoC specific entry   Sascha Hauer
• [PATCH 06/34] ARM i.MX boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 07/34] ARM MXS boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 08/34] ARM OMAP boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 09/34] ARM Samsung boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 10/34] ARM PXA boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 11/34] ARM ep93xx boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 12/34] ARM tegra boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 13/34] ARM nomadik boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 14/34] ARM versatile boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 15/34] ARM netx boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 16/34] ARM clep7212: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 17/34] ARM raspberrypi: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 18/34] ARM AT91: switch to barebox_arm_entry part1   Sascha Hauer
• [PATCH 19/34] ARM AT91: switch at91rm9200 board to barebox_arm_entry   Sascha Hauer
• [PATCH 20/34] ARM AT91: switch sama5d3 to barebox_arm_entry   Sascha Hauer
• [PATCH 21/34] ARM AT91: switch remaining boards to barebox_arm_entry   Sascha Hauer
• [PATCH 22/34] ARM: remove now unused MACH_[HAS|DO]_LOWLEVEL_INIT   Sascha Hauer
• [PATCH 23/34] ARM start-pbl: make board_init_lowlevel_return static   Sascha Hauer
• [PATCH 24/34] ARM start-pbl: call uncompressed binary with arguments   Sascha Hauer
• [PATCH 25/34] ARM start: pickup parameters from pbl   Sascha Hauer
• [PATCH 26/34] ARM: Setup stack at end of SDRAM   Sascha Hauer
• [PATCH 27/34] ARM pbl: Use dynamic parameters for early malloc space   Sascha Hauer
• [PATCH 28/34] ARM mmu: pickup already enabled mmu   Sascha Hauer
• [PATCH 29/34] ARM: Factor out early mmu code   Sascha Hauer
• [PATCH 30/34] ARM: Enable mmu early   Sascha Hauer
• [PATCH 31/34] ARM: Automatically determine malloc size   Sascha Hauer
• [PATCH 32/34] generic memory layout: fix deps for [MALLOC|STACK]_BASE   Sascha Hauer
• [PATCH 33/34] ARM: disable HAVE_CONFIGURABLE_MEMORY_LAYOUT   Sascha Hauer
• [PATCH 34/34] ARM pbl: inline decompress function   Sascha Hauer
• [PATCH 1/1] omap3: fix debug_ll uart base   Sascha Hauer
• [PATCH 1/1] omap3: fix debug_ll uart base   Sascha Hauer
• [RFC] gpiolib: import gpio_request_array() from linux 3.7   Sascha Hauer
• [PATCH v2] atmel_lcdfb: fix warning: implicit declaration of function 'clk_get_rate'   Sascha Hauer
• [PATCH v2] at91sam9_ddrsdr: fix register on mdr read and sdram detection for ddr size   Sascha Hauer
• [PATCH 1/1 v2] usb-a926x: only provide the resource if the driver is enable   Sascha Hauer
• [PATCH 1/1] sama5d3k: the nand flash is 4 bit ecc capable so use it   Sascha Hauer
• make mrproper depends on a .config file?   Sascha Hauer
• [PATCH 1/1] MAKEALL: add regex support   Sascha Hauer
• [PATCH v2] nand_write: initialize OOB buffer for each page   Sascha Hauer
• v2013.02.0   Sascha Hauer
• [PATCH] MIPS: pbl: fix none compression support   Sascha Hauer
• i.MX53, add access to third I2C peripheral   Sascha Hauer
• [PATCH 2/2] pbl: factorise linux/decompress/mm.h inclusion   Sascha Hauer
• [PATCH 1/2] pbl: fix IMAGE_COMPRESSION_LZO-enabled build on MIPS   Sascha Hauer
• [PATCH 1/3] mxs: ssp move to common register layout   Sascha Hauer
• [PATCH 2/3] mxs_spi: initial commit   Sascha Hauer
• [PATCH 3/3] mx28evk: add m25p80 flash via ssp2   Sascha Hauer
• [RFC] gpiolib: import gpio_request_array() from linux 3.7   Sascha Hauer
• [PATCH 1/1] beagle: add nand partition and boot   Sascha Hauer
• NOR memory driver fail with MMU enabled   Sascha Hauer
• [PATCH 1/3] at91: add boot mode detection support   Sascha Hauer
• [RFC PATCH] ARM i.MX6: Add support for SabreSD board   Sascha Hauer
• i.MX53, add access to third I2C peripheral ( resubmit with Signed-off tag )   Sascha Hauer
• [RFC] gpiolib: import gpio_request_array() from linux 3.7   Sascha Hauer
• [PATCH 2/4] macb: register the phy after the macb is init   Sascha Hauer
• [PATCH 2/4] macb: register the phy after the macb is init   Sascha Hauer
• [PATCH 1/1] arm: rename reset and common_reset to barebox_arm_reset_vector and arm_cpu_lowlevel_init   Sascha Hauer
• [PATCH 2/4] macb: register the phy after the macb is init   Sascha Hauer
• [PATCH 2/4] macb: register the phy after the macb is init   Sascha Hauer
• NOR memory driver fail with MMU enabled   Sascha Hauer
• [PATCH 5/6] common: add mem_test routine   Sascha Hauer
• [PATCH 1/2] net phy: Add support for finding a mdio bus by its name   Sascha Hauer
• [PATCH 2/2] miitool: Add support for examing mdio bus   Sascha Hauer
• [PATCH 5/6] common: add mem_test routine   Sascha Hauer
• [PATCH 6/6] commands: add new memtest command   Sascha Hauer
• [PATCH 1/2] net phy: Add support for finding a mdio bus by its name   Sascha Hauer
• [PATCH 1/2] net phy: Add support for finding a mdio bus by its name   Sascha Hauer
• [PATCH 1/2] net phy: Add support for finding a mdio bus by its name   Sascha Hauer
• [PATCH 1/2] net phy: Add support for finding a mdio bus by its name   Sascha Hauer
• [PATCH v3 0/3] Add mxs spi driver and mx28evk as its first user   Sascha Hauer
• [PATCH v2 0/2] at91sam9260/9g20ek: some cleanup   Sascha Hauer
• [PATCH 0/4] Small fixes in barebox   Sascha Hauer
• [PATCH 0/4] Small fixes in barebox   Sascha Hauer
• [PATCH 0/4] Small fixes in barebox   Sascha Hauer
• [PATCH 1/4] macb: use dev_xx message   Sascha Hauer
• [PATCH v2 0/4] Small fixes in barebox   Sascha Hauer
• [PATCH v2] add mdio bus support to miitool   Sascha Hauer
• [PATCH 1/2] net phy: Add mdio buses to mdio_bus_type   Sascha Hauer
• [PATCH 2/2] miitool: Add support for examing mdio bus   Sascha Hauer
• [PATCH 08/11] ARM: mmu: Clear unpredictable bits for translation table   Sascha Hauer
• [For master PATCH 1/1] sama5de3k: add gmacb support   Sascha Hauer
• [For master PATCH 0/7] macb: more fixes + gem (gigabit support)   Sascha Hauer
• [PATCH 01/11] ARM: clps711x: Move lowlevel initialization in common CLPS711X location   Sascha Hauer
• [PATCH] net fec_imx: add support for i.MX6 1000Mbps mode   Sascha Hauer
• i.MX53 - add WEIM register defines   Sascha Hauer
• [PATCH 1/1] commands/ubi.c: Add support for VID header offset in ubiattach   Sascha Hauer
• Trouble booting kernel since 2012.12.1   Sascha Hauer
• [PATCH 1/3] mx23-evk: fix MCI support   Sascha Hauer
• [PATCH 1/2] Introduce device_platform_driver() macro   Sascha Hauer
• [PATCH 01/11] ARM: clps711x: Move lowlevel initialization in common CLPS711X location   Sascha Hauer
• [PATCH 1/3] clocksource: add ARM AMBA SP804 support   Sascha Hauer
• [PATCH 1/3] ARM: ccmx51: Fix printing board HW-revision   Sascha Hauer
• [PATCH 1/2] DeviceTree: add support for initrd in the DT   Sascha Hauer
• [PATCH 1/1] phy/micrel: KSZ9021 diasable Asym Pause support   Sascha Hauer
• v2013.02.0 phyCORE-OMAP4 MLO to big   Sascha Hauer
• [PATCH 2/2] miitool: Add support for examing mdio bus   Sascha Hauer
• [For master PATCH 1/1] sama5de3k: add gmacb support   Sascha Hauer
• [PATCH 1/1] commands/ubi.c: Add support for VID header offset in ubiattach   Sascha Hauer
• [PATCH 6/7] macb: fix tx ring size   Sascha Hauer
• [PATCH v2] ARM i.MX6: Add support for SabreSD board   Sascha Hauer
• [PATCH 1/1] oftree: fix probe support   Sascha Hauer
• [PATCH 1/1] amba: add oftree probe support   Sascha Hauer
• [PATCH 2/2] miitool: Add support for examing mdio bus   Sascha Hauer
• [PATCH 1/2] Introduce device_platform_driver() macro   Sascha Hauer
• [PATCH 0/3 v2] arm: add ARM Vexpress support   Sascha Hauer
• [PATCH 1/2] arm: cache-l2x0 update sync define with Linux 3.5   Sascha Hauer
• [PATCH 1/2] ahci: add generic driver   Sascha Hauer
• [PATCH v2] ARM i.MX6: Add support for SabreSD board   Sascha Hauer
• [PATCH] defenv2: move config-board out of /env/init   Sascha Hauer
• [PATCH] console: consolidate common console code   Sascha Hauer
• [PATCH v2] amba: add oftree probe support   Sascha Hauer
• [PATCH] ARM i.MX28: change default watchdog reset method   Sascha Hauer
• [PATCH] console: consolidate common console code   Sascha Hauer
• [PATCH 1/1] highbank: use the provided dtb by the firmware to probe barebox device and mem size   Sascha Hauer
• [PATCH v2 3/9] ARM: clps711x: Adds config option for CPU PLL multiplier   Sascha Hauer
• [PATCH 1/2] ahci: add generic driver   Sascha Hauer
• [PATCH] Add warning above get_ram_size   Sascha Hauer
• [PATCH 2/6] of: make of_add_memory available for other board   Sascha Hauer
• [PATCH v2 3/9] ARM: clps711x: Adds config option for CPU PLL multiplier   Sascha Hauer
• [PATCH v2 1/2] Introduce device_platform_driver() macro   Sascha Hauer
• [PATCH] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Sascha Hauer
• [PATCH] USB i.MX: Add i.MX6 HSIC support   Sascha Hauer
• [PATCH 1/5] ARM i.MX6: Fix HSIC pad definitions   Sascha Hauer
• [PATCH 2/5] USB chipidea i.MX: Fix PTS mask for HSIC   Sascha Hauer
• [PATCH 3/5] USB ehci: Add platform specific init calls   Sascha Hauer
• [PATCH 4/5] USB i.MX chipidea: implement post init support   Sascha Hauer
• [PATCH 5/5] USB i.MX6: Add HSIC support   Sascha Hauer
• [PATCH] USB i.MX: Add chipidea gadget support   Sascha Hauer
• [PATCH] ARM pbl: move piggydata before bss   Sascha Hauer
• [PATCH] ARM pbl: move piggydata before bss   Sascha Hauer
• [PATCH] Add warning above get_ram_size   Sascha Hauer
• [PATCH 0/2] Summary of last patches submitted   Sascha Hauer
• [PATCH 0/6 v3] arm: add Calxeda Highbank support   Sascha Hauer
• [PATCH 2/5] filetype: add GPT support   Sascha Hauer
• [PATCH] Add warning above get_ram_size   Sascha Hauer
• [PATCH 2/5] filetype: add GPT support   Sascha Hauer
• [PATCH 1/3] env: add register_persistent_environment   Sascha Hauer
• [PATCH] Add missing SZ_xx defines   Sascha Hauer
• [PATCH 3/5] partitons: add framework   Sascha Hauer
• [PATCH 4/5] disk: introduce partition name   Sascha Hauer
• [PATCH 2/4] fs: add pread and pwrite functions   Sascha Hauer
• [PATCH 4/5] disk: introduce partition name   Sascha Hauer
• [PATCH] integrate CFI Flash driver into mtd   Sascha Hauer
• [PATCH 1/6] libmtd: rename functions from mtd_* to libmtd_*   Sascha Hauer
• [PATCH 2/6] mtd: rename mtd file operations callback functions   Sascha Hauer
• [PATCH 3/6] mtd: Add mtd_* functions   Sascha Hauer
• [PATCH 4/6] mtd: Use mtd_* functions where appropriate   Sascha Hauer
• [PATCH 5/6] mtd: implement mtd_lock and mtd_unlock   Sascha Hauer
• [PATCH 6/6] nor flash: integrate into mtd   Sascha Hauer
• [PATCH] nor flash: integrate into mtd   Sascha Hauer
• [PATCH] nor flash: integrate into mtd   Sascha Hauer
• [PATCH] Add missing SZ_xx defines   Sascha Hauer
• [PATCH 2/5] filetype: add GPT support   Sascha Hauer
• [PATCH 2/5] filetype: add GPT support   Sascha Hauer
• [PATCH] clk-fixed-factor: Using parent flags   Sascha Hauer
• [PATCH] fix brown paper bag bug introduced with compile time loglevel   Sascha Hauer
• [PATCH v2] fix brown paper bag bug introduced with compile time loglevel   Sascha Hauer
• [PATCH 1/2] ARM i.MX35: Fix device names for gpio   Sascha Hauer
• [PATCH 2/2] ARM i.MX21: Fix device names for gpio   Sascha Hauer
• [PATCH v3] at91sam9260/9g20ek: use IS_ENABLED instead of #if/#ifdef   Sascha Hauer
• [PATCH 2/5] filetype: add GPT support   Sascha Hauer
• [PATCH 3/5] partitons: add framework   Sascha Hauer
• [PATCH 4/5] disk: introduce partition name   Sascha Hauer
• [PATCH 5/5] disk: partitions: add EFI GUID Partition Table   Sascha Hauer
• [PATCH 2/5] filetype: add GPT support   Sascha Hauer
• [PATCH 1/1] hush: return exit code a real instead of 0/1 only   Sascha Hauer
• [PATCH] fix compiler warnings   Sascha Hauer
• [PATCH 1/3] ARM OMAP phycard-a-l1: Add missing include   Sascha Hauer
• [PATCH 2/3] ARM at91sam9n12ek_defconfig: Fix reassigning of BAREBOX_MAX_IMAGE_SIZE   Sascha Hauer
• [PATCH 3/3] ARM i.MX28: Add missing return value in non-void function   Sascha Hauer
• Environment changes lead to weird boot behaviour   Sascha Hauer
• [PATCH 1/1] hush: return exit code a real instead of 0/1 only   Sascha Hauer
• [PATCH 5/5 v5] disk: partitions: add EFI GUID Partition Table   Sascha Hauer
• [PATCH] commands: automount: Added help string about "-d" option   Sascha Hauer
• [PATCH] mfd: Using MFD_xx prefix for symbols   Sascha Hauer
• [PATCH] Make "dev_get_resource" publicly available   Sascha Hauer
• [PATCH 1/1] of: add do_fixup_by_compatible with u32 and string version   Sascha Hauer
• [PATCH 1/1] defaultenv-2: add boot sequence   Sascha Hauer
• [PATCH 1/1] highbank: add power off support   Sascha Hauer
• [RFC] Add Generic GPIO driver   Sascha Hauer
• [PATCH 2/2] fs: add pread and pwrite functions   Sascha Hauer
• [RFC] Add Generic GPIO driver   Sascha Hauer
• [PATCH] nor flash: integrate into mtd   Sascha Hauer
• [RFC] Add Generic GPIO driver   Sascha Hauer
• [PATCH] at91sam9260/9g20ek: use -EINVAL for invalid gpio on atmel_mci   Sascha Hauer
• [PATCH] at91sam9260/9g20ek: refactor init_board script   Sascha Hauer
• [PATCH] nor flash: integrate into mtd   Sascha Hauer
• [For master PATCH v2] ARM: at91: use -EINVAL for invalid gpio on atmel_mci   Sascha Hauer
• [PATCH 2/2] fs: add pread and pwrite functions   Sascha Hauer
• [PATCH] mtd: Do not write empty pages, UBI fix   Sascha Hauer
• [PATCH 1/2] mtd: nand: do not write empty pages   Sascha Hauer
• [PATCH 2/2] libubi: Use global mtd_all_ff function   Sascha Hauer
• [PATCH] ubiformat: open flash image readonly   Sascha Hauer
• [PATCH 1/1] highbank: add wfi for poweroff   Sascha Hauer
• [PATCH] fix compiler warnings: use puts() instead of printf()   Sascha Hauer
• [PATCH 1/2] net: fec_imx: ensure constant timeout in fec_halt   Sascha Hauer
• [PATCH 2/2] net: imx_fec: fix RMII support for i.MX6   Sascha Hauer
• [PATCH 1/2] nandtest: use new pread and pwrite functions   Sascha Hauer
• [PATCH 1/1] Makefile: drop duplicate cmd_as_o_S support   Sascha Hauer
• [PATCH v4 1/3] env: add register_persistent_environment   Sascha Hauer
• [For master PATCH 1/1] grapric_utils: set_pixel only write 16bit in 16bit mode   Sascha Hauer
• [PATCH] defaultenv-2: fix base/init/ps1: don't reload /env/config   Sascha Hauer
• [PATCH] imx_spi: fix bus-num setup   Sascha Hauer
• [For master PATCH 1/1] grapric_utils: set_pixel only write 16bit in 16bit mode   Sascha Hauer
• [PATCH 1/2] Makefile.lib: introduce lwl-y for lowlevel code   Sascha Hauer
• [RFC] Add system controller register driver (SYSCON)   Sascha Hauer
• [PATCH 1/2] hush: expand variables before globbing in for loops   Sascha Hauer
• [PATCH 2/2] hush: implement $*   Sascha Hauer
• [PATCH 1/2] hush: expand variables before globbing in for loops   Sascha Hauer
• [PATCH] defaultenv-2: add boot sequence   Sascha Hauer
• [PATCH 1/2] net: fec_imx: use dev_err and dev_warn instead of printf   Sascha Hauer
• [PATCH v2 next 0/2] defenv2: complete move config-board out of /env/init   Sascha Hauer
• [PATCH v2 next 1/2] defenv2: comment setting default values in /env/config   Sascha Hauer
• [PATCH 1/1] phy: fix force mode   Sascha Hauer
• [PATCH] ARM: pcm038: Remove duplicate imx27_barebox_entry() call   Sascha Hauer
• [PATCH 1/7] ARM: pcm038: Select IIM by default   Sascha Hauer
• [PATCH 1/1] smc911111: fix send and recv return value   Sascha Hauer
• [PATCH] OMAP4 USB BOOT: remove double line endings   Sascha Hauer
• [PATCH 1/2] ARM i.MX: Fix booting from NOR when external nand boot is enabled   Sascha Hauer
• [PATCH 2/2] ARM i.MX35: Let MAX clk be in run-mode-on   Sascha Hauer
• [PATCH 1/2] ARM i.MX pcm043: Switch to new environment   Sascha Hauer
• [PATCH 2/2] ARM i.MX pcm043: Use imx_bootsource() to detect bootsource   Sascha Hauer
• [PATCH 1/1] Makefile: drop duplicate cmd_as_o_S support   Sascha Hauer
• [PATCH] bareboxenv: Return proper exit code on failure.   Sascha Hauer
• [PATCH v2] menu: fix remove superfluous newline: change puts() -> printf("%s", )   Sascha Hauer
• [PATCH 1/1] serial/Makefile: drop out of date comments   Sascha Hauer
• setupmbr: Bad/No Signature   Sascha Hauer
• [PATCH] ARM: i.MX: Replace numbers with predefined constants in several places   Sascha Hauer
• [PATCH 2/2] driver/serial: add driver for the mxs application uart   Sascha Hauer
• [PATCH] remove libfdt   Sascha Hauer
• [PATCH 01/29] of: unflatten: allocate root node explicitly   Sascha Hauer
• [PATCH 02/29] of: export of_find_child   Sascha Hauer
• [PATCH 03/29] of: removed unused variables   Sascha Hauer
• [PATCH 04/29] of: Let of_find_node_by_path iterate over tree   Sascha Hauer
• [PATCH 05/29] of: remove allnodes list   Sascha Hauer
• [PATCH 06/29] ARM bootm: Use of_get_fixed_tree   Sascha Hauer
• [PATCH 07/29] of: Add of_set_property and of_create_node   Sascha Hauer
• [PATCH 08/29] of_node command: use of_create_node   Sascha Hauer
• [PATCH 09/29] of: Add root node argument to of_find_node_by_path   Sascha Hauer
• [PATCH 10/29] of: Add missing prototype for of_device_is_compatible   Sascha Hauer
• [PATCH 11/29] of: let of_unflatten_dtb return the unflattened tree   Sascha Hauer
• [PATCH 12/29] of: make unflatten independent of libfdt   Sascha Hauer
• [PATCH 13/29] of: make flatten independent of libfdt   Sascha Hauer
• [PATCH 14/29] of/fdt: use optimized endianess conversion   Sascha Hauer
• [PATCH 15/29] oftree command: Use of_print_nodes   Sascha Hauer
• [PATCH 16/29] of: move OFTREE Kconfig option to drivers/of/   Sascha Hauer
• [PATCH 17/29] of: make OFDEVICE a user selectable option   Sascha Hauer
• [PATCH 18/29] oftree command: retire CMD_OFTREE_PROBE Kconfig option   Sascha Hauer
• [PATCH 19/29] of: move oftree Kconfig to the top of the drivers menu   Sascha Hauer
• [PATCH 20/29] of: Pass barebox internal format devicetree to of_get_fixed_tree   Sascha Hauer
• [PATCH 21/29] bootm: Use of_print_nodes instead of fdt_print   Sascha Hauer
• [PATCH 22/29] of: move flat devicetree functions to separate file   Sascha Hauer
• [PATCH 23/29] of: Add of property write functions for u32   Sascha Hauer
• [PATCH 24/29] of: make value of property in of_new_property optional   Sascha Hauer
• [PATCH 25/29] of: Add missing prototype for size/address counting functions   Sascha Hauer
• [PATCH 26/29] of: fixup unflattened devicetree   Sascha Hauer
• [PATCH 27/29] of: remove unused libfdt   Sascha Hauer
• [PATCH 28/29] of_* commands: print usage when insufficient arguments are given   Sascha Hauer
• [PATCH 29/29] of_property command: Fix crash with empty property value   Sascha Hauer
• [PATCHv2 0/2] ARM: cfa10036: Store the barebox environment on the MMC   Sascha Hauer
• [PATCH] log2: Fix declaration of __roundup_pow_of_two   Sascha Hauer
• [PATCHv2 0/2] cfa10036: Retrieve RAM size at runtime   Sascha Hauer
• [PATCH 13/29] of: make flatten independent of libfdt   Sascha Hauer
• [PATCH] mtd: always write page when oob is given   Sascha Hauer
• [PATCH] net: dhcp: fix typo   Sascha Hauer
• [PATCH 1/1] ahci-generic: add oftree support   Rob Herring
• [PATCH 2/3] arm: add highbank support   Rob Herring
• [PATCH 1/1] highbank: use the provided dtb by the firmware to probe barebox device and mem size   Rob Herring
• [PATCH 1/1] highbank: add power off support   Rob Herring
• [PATCH 1/1] highbank: add wfi for poweroff   Rob Herring
• Environment changes lead to weird boot behaviour   Christian Kapeller
• [PATCH] bareboxenv: Return proper exit code on failure.   Christian Kapeller
• [PATCH] bareboxenv: Return proper exit code on failure.   Christian Kapeller
• make mrproper depends on a .config file?   Jürgen Kilb
• [PATCH 1/3] at91: add boot mode detection support   Marc Kleine-Budde
• [PATCH 5/6] common: add mem_test routine   Marc Kleine-Budde
• [PATCH 6/6] commands: add new memtest command   Marc Kleine-Budde
• [PATCH 1/1] commands/ubi.c: Add support for VID header offset in ubiattach   Marc Kleine-Budde
• [PATCH 1/1] commands/ubi.c: Add support for VID header offset in ubiattach   Marc Kleine-Budde
• [PATCH] bareboxenv: Return proper exit code on failure.   Marc Kleine-Budde
• [PATCH 0/2] add mxs application uart driver   Marc Kleine-Budde
• [PATCH 1/2] driver/serial: Kconfig: explicitly state that existing mxs driver is for the debug uart   Marc Kleine-Budde
• [PATCH 2/2] driver/serial: add driver for the mxs application uart   Marc Kleine-Budde
• [PATCH v2 0/2] add mxs application uart driver   Marc Kleine-Budde
• [PATCH 1/2] driver/serial: Kconfig: explicitly state that existing mxs driver is for the debug uart   Marc Kleine-Budde
• [PATCH 2/2] driver/serial: add driver for the mxs application uart   Marc Kleine-Budde
• [PATCH 1/1] commands/ubi.c: Add support for VID header offset in ubiattach   Jan Lübbe
• [PATCH 1/1] commands/ubi.c: Add support for VID header offset in ubiattach   Jan Lübbe
• [PATCH] net fec_imx: add support for i.MX6 1000Mbps mode   Daniel Mierswa
• setupmbr: Bad/No Signature   Nathan
• UBOOT2 JMP   Nathan
• [PATCH 1/1] sama5d3k: the nand flash is 4 bit ecc capable so use it   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 18/34] ARM AT91: switch to barebox_arm_entry part1   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 21/34] ARM AT91: switch remaining boards to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 3/5] gpiolib: gpio_request(): add error message   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] Add new ARM entry point for barebox   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] omap3: fix debug_ll uart base   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 3/5] gpiolib: gpio_request(): add error message   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 2/4] gpiolib: add gpio_request_{in,out}put support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 21/34] ARM AT91: switch remaining boards to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] atmel_lcdfb: fix warning: implicit declaration of function 'clk_get_rate'   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] atmel_lcdfb: fix warning: implicit declaration of function 'clk_get_rate'   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 18/34] ARM AT91: switch to barebox_arm_entry part1   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] MAKEALL: add regex support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] at91sam9_ddrsdr: fix register on mdr read for ddr size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] usb-a926x: only provide the resource if the driver is enable   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] at91sam9_ddrsdr: fix register on mdr read and sdram detection for ddr size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] Add new ARM entry point for barebox   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/36] ARM: Add new entry point for barebox   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/36] ARM: add __noreturn to board_init_lowlevel_return   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/36] ARM i.MX: Use SRAM stack in lowlevel code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/36] ARM i.MX: Add i.MX specific entry point for barebox   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/36] ARM i.MX: prepare external nand boot for SoC specific entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/36] ARM i.MX boards: switch to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/36] ARM MXS boards: switch to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/36] ARM OMAP boards: switch to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/36] ARM Samsung boards: switch to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/36] ARM PXA boards: switch to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/36] ARM ep93xx boards: switch to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 12/36] ARM tegra boards: switch to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 13/36] ARM nomadik boards: switch to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 14/36] ARM versatile boards: switch to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 15/36] ARM netx boards: switch to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 16/36] ARM clep7212: switch to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 17/36] ARM raspberrypi: switch to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 18/36] ARM AT91: switch at91sam9 to barebox_arm_entry part1   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 19/36] ARM AT91: switch at91rm9200 board to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 20/36] ARM AT91: switch at91sam9g45 to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 21/36] ARM AT91: switch at91sam9x5 to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 22/36] ARM AT91: switch at91sam9n12 to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 23/36] ARM AT91: switch sama5d3 to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 24/36] ARM: remove now unused MACH_[HAS|DO]_LOWLEVEL_INIT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 25/36] ARM start-pbl: make board_init_lowlevel_return static   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 26/36] ARM start-pbl: call uncompressed binary with arguments   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 27/36] ARM start: pickup parameters from pbl   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 28/36] ARM: Setup stack at end of SDRAM   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 29/36] ARM pbl: Use dynamic parameters for early malloc space   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 30/36] ARM mmu: pickup already enabled mmu   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 31/36] ARM: Factor out early mmu code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 32/36] ARM: Enable mmu early   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 33/36] ARM: Automatically determine malloc size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 34/36] generic memory layout: fix deps for [MALLOC|STACK]_BASE   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 35/36] ARM: disable HAVE_CONFIGURABLE_MEMORY_LAYOUT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 36/36] ARM pbl: inline decompress function   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1 v2] usb-a926x: only provide the resource if the driver is enable   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/5] at91sam926x: drop AT91_BASE_SYS for sdram controller + gpio cleanup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] usb-a926x: only provide the resource if the driver is enable   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] at91: gpio: split accessor so we can use them for early init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] at91sam926x_lowlevel_init: use pio macro   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] at91sam926x_lowlevel_init: use struct to pass soc config   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] at91sam9: drop AT91_BASE_SYS for sdram controller   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] usb-a926x: only provide the resource if the driver is enable   Jean-Christophe PLAGNIOL-VILLARD
• [RFC] gpiolib: import gpio_request_array() from linux 3.7   Jean-Christophe PLAGNIOL-VILLARD
• the different between getopt and getopts   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4] macb: more fixes   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] macb: use dev_xx message   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] macb: register the phy after the macb is init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] macb: report timeout on send   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] macb: drop non used define   Jean-Christophe PLAGNIOL-VILLARD
• [RFC] gpiolib: import gpio_request_array() from linux 3.7   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 2/3] SPI: Add i.MX 23/28 SPI driver support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] arm: rename reset and common_reset to barebox_arm_reset_vector and arm_cpu_lowlevel_init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3] at91: add boot mode detection support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] at91: add boot mode detection support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] sama5d3: add boot mode supprot   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] sama5d3: detect boot mode   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] sama5d3: detect boot mode   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] miitool: add GbE support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] at91: add boot mode detection support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] macb: register the phy after the macb is init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/5] at91sam926x: drop AT91_BASE_SYS for sdram controller + gpio cleanup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] macb: register the phy after the macb is init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] net phy: Add support for finding a mdio bus by its name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM i.MX6: Add support for SabreSD board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] net phy: Add support for finding a mdio bus by its name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 0/2] at91sam9260/9g20ek: some cleanup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] net phy: Add support for finding a mdio bus by its name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] net phy: Add support for finding a mdio bus by its name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] phy/micrel: KSZ9021 diasable Asym Pause support   Jean-Christophe PLAGNIOL-VILLARD
• [For master PATCH 0/7] macb: more fixes + gem (gigabit support)   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] macb: call macb_init at probe explecitly   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] macb: sync remaining define with linux   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] macb: use the macro as in linux for tx/rx buffer ring size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] macb: enable Tramsmit and Receive at open   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] macb: reset the IP at init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] macb: fix tx ring size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] macb: add cadence Gigabit GEM support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/1] sama5d3xek: add GEM Gigabig support   Jean-Christophe PLAGNIOL-VILLARD
• [For master PATCH 1/1] sama5de3k: add gmacb support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/11] ARM: clps711x: Adds config option for CPU PLL multiplier   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] macb: fix tx ring size   Jean-Christophe PLAGNIOL-VILLARD
• [SPAM] Re[2]: [PATCH 03/11] ARM: clps711x: Adds config option for CPU PLL multiplier   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3] arm: add ARM Vexpress support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] DeviceTree: add support for initrd in the DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] clocksource: add ARM AMBA SP804 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] arm: add macro cpu_is_xxx   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] arm: add vexpress board support   Jean-Christophe PLAGNIOL-VILLARD
• [For master PATCH 1/1] sama5de3k: add gmacb support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3 v2] arm: add ARM Vexpress support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] clocksource: add ARM AMBA SP804 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] arm: add macro cpu_is_xxx   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] arm: add vexpress board support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] macb: fix tx ring size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7 v2] macb: fix tx ring size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7 v2] macb: add cadence Gigabit GEM support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] arm: cache-l2x0 update sync define with Linux 3.5   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] arm: move outercase to cpu.c as some SoC as the ux500 always need to flush the l2x0   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ahci: add generic driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] ahci: handle COMINIT received during spin-up   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3] arm: add Calxeda Highbank support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] highbank: add xgmac support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] arm: add highbank support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] highbank: add l2x0 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] oftree: fix probe support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3 v2] arm: add Calxeda Highbank support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] highbank: add xgmac support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] arm: add highbank support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] highbank: add l2x0 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] amba: add oftree probe support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] amba: add oftree probe support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] amba: add oftree probe support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] amba: add oftree probe support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] console: consolidate common console code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3] vexpress: detect the mapping based on the amba devices   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] amba: introduce amba_device_get_pid/cid   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] sp804: introduce amba_is_arm_sp804 to detect if the sp804 is present at the address   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] vexpress: detect the board periph mapping and detecting the sp804 mapping   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] ahci-generic: add oftree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] ahci-generic: add oftree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] highbank: use the provided dtb by the firmware to probe barebox device and mem size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] highbank: use the provided dtb by the firmware to probe barebox device and mem size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] commands/ubi.c: Add support for VID header offset in ubiattach   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] highbank: use the provided dtb by the firmware to probe barebox device and mem size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] arm: add highbank support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ahci: add generic driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] highbank: use the provided dtb by the firmware to probe barebox device and mem size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/6 v3] arm: add Calxeda Highbank support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/6] ahci-generic: add oftree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/6] of: make of_add_memory available for other board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/6] highbank: add xgmac support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6] arm: add highbank support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] highbank: add l2x0 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] highbank: use the provided dtb by the firmware to probe barebox device and mem size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 3/9] ARM: clps711x: Adds config option for CPU PLL multiplier   Jean-Christophe PLAGNIOL-VILLARD
• [SPAM] Re[2]: [PATCH v2 3/9] ARM: clps711x: Adds config option for CPU PLL multiplier   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] amba: pl011: set RTS during initialization   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] cfa10036: Retrieve the RAM size at runtime   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] cfa-10036: Use the second MMC partition to store the environment   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/6] of: make of_add_memory available for other board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 3/9] ARM: clps711x: Adds config option for CPU PLL multiplier   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] of_add_memory: check the device_type is memory   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM pbl: move piggydata before bss   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/5] add EFI GUID Partition Table support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] linux/types: import __aligned_x64 from the kernel   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] filetype: add GPT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] partitons: add framework   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] disk: introduce partition name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] disk: partitions: add EFI GUID Partition Table   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] filetype: add GPT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] disk: introduce partition name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] filetype: add GPT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/5] add EFI GUID Partition Table support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] linux/types: import __aligned_x64 from the kernel   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] filetype: add GPT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] partitons: add framework   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] disk: introduce partition name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] disk: partitions: add EFI GUID Partition Table   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] at91sam9260/9g20ek: remove #ifdef for ek_usb_add_device_mci()   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] filetype: add GPT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] filetype: add GPT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/5 v3] add EFI GUID Partition Table support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] linux/types: import __aligned_x64 from the kernel   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] filetype: add GPT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] partitons: add framework   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] disk: introduce partition name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] disk: partitions: add EFI GUID Partition Table   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] filetype: add GPT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] hush: return exit code a real instead of 0/1 only   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] addpart: size and offset not needed for already defined partitions   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] defaultenv-2: add boot sequence   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] hush: return exit code a real instead of 0/1 only   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] disk: introduce partition name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] devfs: add symlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/5 v4] add EFI GUID Partition Table support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] linux/types: import __aligned_x64 from the kernel   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] filetype: add GPT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] partitons: add framework   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] disk: introduce partition name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] disk: partitions: add EFI GUID Partition Table   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] Add warning above get_ram_size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] of: add do_fixup_by_compatible with u32 and string version   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] highbank: add of fixup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] highbank: move register value to include/mach   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] highbank: add of fixup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] highbank: add power off support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5 v5] disk: partitions: add EFI GUID Partition Table   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] login: disable input console if password wrong   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] of: add do_fixup_by_compatible with u32 and string version   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5 v5] disk: partitions: add EFI GUID Partition Table   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1 v2] defaultenv-2: add boot sequence   Jean-Christophe PLAGNIOL-VILLARD
• [For master PATCH 1/1] grapric_utils: set_pixel only write 16bit in 16bit mode   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 1/3] env: add register_persistent_environment   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 1/3] env: add register_persistent_environment   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 1/3] env: add register_persistent_environment   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] highbank: add wfi for poweroff   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] Makefile.lib: introduce lwl-y for lowlevel code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] switch boards to lwl-y   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] Makefile: x_flags prepare for apps support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] highbank: add wfi for poweroff   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] Makefile: x_flags prepare for apps support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] Makefile: drop duplicate cmd_as_o_S support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 1/3] env: add register_persistent_environment   Jean-Christophe PLAGNIOL-VILLARD
• [For master PATCH 1/1] grapric_utils: set_pixel only write 16bit in 16bit mode   Jean-Christophe PLAGNIOL-VILLARD
• [For-next PATCH 1/1] switch more boards to lwl-y   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] smc911111: fix send and recv return value   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] phy: fix force mode   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] ARM: pcm038: Update defconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] fix compiler warnings: use puts() instead of printf()   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] fix compiler warnings: use puts() instead of printf()   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] fix compiler warnings: use puts() instead of printf()   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] serial/Makefile: drop out of date comments   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] Makefile: drop duplicate cmd_as_o_S support   Jean-Christophe PLAGNIOL-VILLARD
• [RFC TESTING] uncompress: update to lzo-2013 and add lz4   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 3/5] gpiolib: gpio_request(): add error message   Antony Pavlov
• [PATCH v3 0/4] gpiolib: add gpio_request_{in,out}put support   Antony Pavlov
• [PATCH v3 1/4] gpiolib: fix whitespaces   Antony Pavlov
• [PATCH v3 2/4] gpiolib: add gpio_request_{in,out}put support   Antony Pavlov
• [PATCH v3 3/4] at91sam9*: use gpio_request_output()   Antony Pavlov
• [PATCH v3 4/4] animeo_ip: use gpio_request_input()   Antony Pavlov
• [PATCH v3 2/4] gpiolib: add gpio_request_{in,out}put support   Antony Pavlov
• Lost access to M25Pxx in move to 2013.01   Antony Pavlov
• [RFC] gpiolib: import gpio_request_array() from linux 3.7   Antony Pavlov
• [RFC] gpiolib: import gpio_request_array() from linux 3.7   Antony Pavlov
• [PATCH] MIPS: pbl: fix none compression support   Antony Pavlov
• [PATCH 1/2] pbl: fix IMAGE_COMPRESSION_LZO-enabled build on MIPS   Antony Pavlov
• [PATCH 2/2] pbl: factorise linux/decompress/mm.h inclusion   Antony Pavlov
• [RFC] gpiolib: import gpio_request_array() from linux 3.7   Antony Pavlov
• [PATCH 2/2] pbl: factorise linux/decompress/mm.h inclusion   Antony Pavlov
• [RFC] gpiolib: import gpio_request_array() from linux 3.7   Antony Pavlov
• [PATCH 1/1] miitool: add GbE support   Antony Pavlov
• [RFC] gpiolib: import gpio_request_array() from linux 3.7   Antony Pavlov
• [PATCH] usb: fix build for big-endian platform   Antony Pavlov
• Lost access to M25Pxx in move to 2013.01   George Pontis
• i.MX53, add access to third I2C peripheral   George Pontis
• Lost access to M25Pxx in move to 2013.01   George Pontis
• i.MX53, add access to third I2C peripheral   George Pontis
• i.MX53, add access to third I2C peripheral ( resubmit with Signed-off tag )   George Pontis
• i.MX53 - add WEIM register defines   George Pontis
• Trouble booting kernel since 2012.12.1   George Pontis
• [PATCH 1/3] at91sam9260/9g20ek: cleanup coding style   Fabio Porcedda
• [PATCH v2 0/2] at91sam9260/9g20ek: some cleanup   Fabio Porcedda
• [PATCH v2 1/2] at91sam9260/9g20ek: cleanup coding style   Fabio Porcedda
• [PATCH v2 2/2] at91sam9260/9g20ek: enable clock via clock framework   Fabio Porcedda
• [PATCH 0/2] at91sam9260/9g20ek: cleanup and optimization   Fabio Porcedda
• [PATCH 1/2] at91sam9260/9g20ek: use IS_ENABLED instead of #if/#ifdef   Fabio Porcedda
• [PATCH 2/2] at91sam9260/9g20ek: remove #ifdef for ek_usb_add_device_mci()   Fabio Porcedda
• [PATCH 1/2] at91sam9260/9g20ek: use IS_ENABLED instead of #if/#ifdef   Fabio Porcedda
• [PATCH 2/2] at91sam9260/9g20ek: remove #ifdef for ek_usb_add_device_mci()   Fabio Porcedda
• [PATCH v2 0/2] at91sam9260/9g20ek: cleanup and optimization   Fabio Porcedda
• [PATCH v2 1/2] at91sam9260/9g20ek: use IS_ENABLED instead of #if/#ifdef   Fabio Porcedda
• [PATCH v2 2/2] at91sam9260/9g20ek: remove #ifdef for ek_usb_add_device_mci()   Fabio Porcedda
• [PATCH 2/2] at91sam9260/9g20ek: remove #ifdef for ek_usb_add_device_mci()   Fabio Porcedda
• [PATCH v3] at91sam9260/9g20ek: use IS_ENABLED instead of #if/#ifdef   Fabio Porcedda
• [PATCH] at91sam9260/9g20ek: use -EINVAL for invalid gpio on atmel_mci   Fabio Porcedda
• [PATCH] at91sam9260/9g20ek: refactor init_board script   Fabio Porcedda
• [PATCH] at91sam9260/9g20ek: use -EINVAL for invalid gpio on atmel_mci   Fabio Porcedda
• [PATCH] at91sam9260/9g20ek: use -EINVAL for invalid gpio on atmel_mci   Fabio Porcedda
• [For master PATCH v2] ARM: at91: use -EINVAL for invalid gpio on atmel_mci   Fabio Porcedda
• [For master RFC] fix compiler warnings: use puts() instead of printf()   Fabio Porcedda
• [PATCH] fix compiler warnings: use puts() instead of printf()   Fabio Porcedda
• [PATCH] defaultenv-2: fix base/init/ps1: don't reload /env/config   Fabio Porcedda
• [PATCH] defenv2: comment setting default values in /env/config   Fabio Porcedda
• [PATCH v2 next 0/2] defenv2: complete move config-board out of /env/init   Fabio Porcedda
• [PATCH v2 next 1/2] defenv2: comment setting default values in /env/config   Fabio Porcedda
• [PATCH v2 next 2/2] ARM at91 telit-evk-pro3: move config-board out of /env/init   Fabio Porcedda
• [PATCH v2 next 1/2] defenv2: comment setting default values in /env/config   Fabio Porcedda
• [PATCH v2 next 1/2] defenv2: comment setting default values in /env/config   Fabio Porcedda
• [PATCH v2 next 0/2] defenv2: complete move config-board out of /env/init   Fabio Porcedda
• [PATCH] OMAP4 USB BOOT: remove double line endings   Fabio Porcedda
• [RFC] menu: fix remove superfluous newline: change puts() -> printf("%s, )   Fabio Porcedda
• [PATCH v2 next 1/2] defenv2: comment setting default values in /env/config   Fabio Porcedda
• [PATCH] fix compiler warnings: use puts() instead of printf()   Fabio Porcedda
• [PATCH] fix compiler warnings: use puts() instead of printf()   Fabio Porcedda
• [PATCH v2] menu: fix remove superfluous newline: change puts() -> printf("%s", )   Fabio Porcedda
• [PATCH] fix compiler warnings: use puts() instead of printf()   Fabio Porcedda
• [PATCH 0/2] ARM: cfa10036: Store the barebox environment on the MMC   Maxime Ripard
• [PATCH 1/2] cfa-10036: Use the second MMC partition to store the environment   Maxime Ripard
• [PATCH 2/2] cfa10036: Update the environment   Maxime Ripard
• [PATCH] cfa10036: Retrieve the RAM size at runtime   Maxime Ripard
• [PATCH] Add warning above get_ram_size   Maxime Ripard
• [PATCH] cfa10036: Retrieve the RAM size at runtime   Maxime Ripard
• [PATCH 1/2] cfa-10036: Use the second MMC partition to store the environment   Maxime Ripard
• [PATCH 1/2] cfa-10036: Use the second MMC partition to store the environment   Maxime Ripard
• [PATCH] Add warning above get_ram_size   Maxime Ripard
• [PATCHv2 0/2] ARM: cfa10036: Store the barebox environment on the MMC   Maxime Ripard
• [PATCH 1/2] cfa-10036: Use the second MMC partition to store the environment   Maxime Ripard
• [PATCH 2/2] cfa10036: Update the environment   Maxime Ripard
• [PATCH] log2: Fix declaration of __roundup_pow_of_two   Maxime Ripard
• [PATCHv2 0/2] cfa10036: Retrieve RAM size at runtime   Maxime Ripard
• [PATCH 1/2] memsize: Make get_ram_size RAM proof   Maxime Ripard
• [PATCH 2/2] cfa10036: Retrieve the RAM size at runtime   Maxime Ripard
• [PATCH] ARM: cfa10036: Remove the boot partition and boot from ext   Maxime Ripard
• Re: i.MX53, add access to third I2C peripheral   Alexander Shiyan
• NOR memory driver fail with MMU enabled   Alexander Shiyan
• Re[2]: NOR memory driver fail with MMU enabled   Alexander Shiyan
• Re[2]: NOR memory driver fail with MMU enabled   Alexander Shiyan
• [PATCH 01/11] ARM: clps711x: Move lowlevel initialization in common CLPS711X location   Alexander Shiyan
• [PATCH 02/11] ARM: clps711x: Fix SDRAM setup comment   Alexander Shiyan
• [PATCH 03/11] ARM: clps711x: Adds config option for CPU PLL multiplier   Alexander Shiyan
• [PATCH 04/11] ARM: clps711x: Decrease initial memory size to 8MB   Alexander Shiyan
• [PATCH 05/11] ARM: clps711x: Remove unused "start" declaration from reset.c   Alexander Shiyan
• [PATCH 06/11] ARM: clps711x: Mark private functions that not will be used outside as static   Alexander Shiyan
• [PATCH 07/11] ARM: clep7212: Fix NULL pointer exception if MMU is enabled   Alexander Shiyan
• [PATCH 08/11] ARM: mmu: Clear unpredictable bits for translation table   Alexander Shiyan
• [PATCH 09/11] ARM: clps711x: Move memory initialization in common CLPS711X location   Alexander Shiyan
• [PATCH 10/11] ARM: clps711x: Turn off all peripherals on startup   Alexander Shiyan
• [PATCH 11/11] ARM: clps711x: Update defconfig   Alexander Shiyan
• Re[2]: [PATCH 03/11] ARM: clps711x: Adds config option for CPU PLL multiplier   Alexander Shiyan
• [PATCH 1/3] ARM: ccmx51: Fix printing board HW-revision   Alexander Shiyan
• [PATCH 2/3] ARM: ccmx51: Replace ifdefs with IS_ENABLED   Alexander Shiyan
• [PATCH 3/3] ARM: ccmx51: Add powerup delay for LAN9221   Alexander Shiyan
• [PATCH] net: CPSW: Fix non-OMAP barebox building with DRIVER_NET_CPSW option   Alexander Shiyan
• [PATCH 1/2] Introduce device_platform_driver() macro   Alexander Shiyan
• [PATCH 2/2] Use new device_platform_driver() macro for drivers   Alexander Shiyan
• Re: i.MX53 - add WEIM register defines   Alexander Shiyan
• Re[2]: [PATCH 01/11] ARM: clps711x: Move lowlevel initialization in common CLPS711X location   Alexander Shiyan
• Re[2]: [PATCH 1/2] Introduce device_platform_driver() macro   Alexander Shiyan
• Re[2]: [PATCH 1/2] Introduce device_platform_driver() macro   Alexander Shiyan
• [PATCH v2 1/2] Introduce device_platform_driver() macro   Alexander Shiyan
• [PATCH v2 2/2] Use new device_platform_driver() macro for drivers   Alexander Shiyan
• [PATCH v2 1/9] ARM: clps711x: Rework lowlevel initialization code   Alexander Shiyan
• [PATCH v2 2/9] ARM: clps711x: Move basic lowlevel initialization in common CLPS711X location   Alexander Shiyan
• [PATCH v2 3/9] ARM: clps711x: Adds config option for CPU PLL multiplier   Alexander Shiyan
• [PATCH v2 4/9] ARM: clps711x: Remove unused "start" declaration from reset.c   Alexander Shiyan
• [PATCH v2 5/9] ARM: clps711x: Mark private functions that not will be used outside as static   Alexander Shiyan
• [PATCH v2 6/9] ARM: clep7212: Fix NULL pointer exception if MMU is enabled   Alexander Shiyan
• [PATCH v2 7/9] ARM: clps711x: Move memory initialization in common CLPS711X location   Alexander Shiyan
• [PATCH v2 8/9] ARM: clep7212: Update default environment   Alexander Shiyan
• [PATCH v2 9/9] ARM: clps711x: Update defconfig   Alexander Shiyan
• Re[2]: [PATCH v2 3/9] ARM: clps711x: Adds config option for CPU PLL multiplier   Alexander Shiyan
• Re[2]: [PATCH v2 3/9] ARM: clps711x: Adds config option for CPU PLL multiplier   Alexander Shiyan
• Re[2]: [PATCH v2 3/9] ARM: clps711x: Adds config option for CPU PLL multiplier   Alexander Shiyan
• [PATCH] Add missing SZ_xx defines   Alexander Shiyan
• Re[2]: [PATCH] Add missing SZ_xx defines   Alexander Shiyan
• [PATCH] clk-fixed-factor: Using parent flags   Alexander Shiyan
• [RFC] Add Generic GPIO driver   Alexander Shiyan
• [PATCH] mfd: Using MFD_xx prefix for symbols   Alexander Shiyan
• [PATCH] Make "dev_get_resource" publicly available   Alexander Shiyan
• [RFC] Add system controller register driver (SYSCON)   Alexander Shiyan
• Re[2]: [PATCH] Add warning above get_ram_size   Alexander Shiyan
• [PATCH] commands: automount: Added help string about "-d" option   Alexander Shiyan
• Re[2]: [RFC] Add Generic GPIO driver   Alexander Shiyan
• Re[2]: [RFC] Add Generic GPIO driver   Alexander Shiyan
• Re[2]: [RFC] Add Generic GPIO driver   Alexander Shiyan
• [PATCH 1/7] ARM: pcm038: Select IIM by default   Alexander Shiyan
• [PATCH 2/7] ARM: pcm038: Fix serial number IIM-address   Alexander Shiyan
• [PATCH 3/7] ARM: pcm970: Fix bug with CompactFlash   Alexander Shiyan
• [PATCH 4/7] ARM: pcm970: Replace #ifdef with IS_ENABLED()   Alexander Shiyan
• [PATCH 5/7] ARM: i.MX27: Use DEVICE_ID_SINGLE for IIM, CCM and ESDCTL   Alexander Shiyan
• [PATCH 6/7] ARM: pcm038: Using "get_ram_size" for determine SRAM size   Alexander Shiyan
• [PATCH 7/7] ARM: pcm038: Update defconfig   Alexander Shiyan
• [PATCH] ARM: pcm038: Remove duplicate imx27_barebox_entry() call   Alexander Shiyan
• [PATCH] mfd: mc13xxx: Use device->bus field for using appropriate mode   Alexander Shiyan
• Re: [PATCH] mfd: mc13xxx: Use device->bus field for using appropriate mode   Alexander Shiyan
• [PATCH] ARM: i.MX: Replace numbers with predefined constants in several places   Alexander Shiyan
• [PATCH 2/5] filetype: add GPT support   Johannes Stezenbach
• [PATCH 2/5] filetype: add GPT support   Johannes Stezenbach
• [PATCH 2/5] filetype: add GPT support   Johannes Stezenbach
• [RFC PATCH] ARM i.MX6: Add support for SabreSD board   Steffen Trumtrar
• [PATCH] ARM i.MX28: change default watchdog reset method   Steffen Trumtrar
• [PATCH] Add missing SZ_xx defines   Steffen Trumtrar
• v2013.02.0 phyCORE-OMAP4 MLO to big   Jan Weitzel
• Re: Quotation for Car Music EL lamp（sound activated equalizer）   Bruce Yu

Last message date: Thu Feb 28 15:05:02 EST 2013
Archived on: Thu Feb 28 14:52:05 EST 2013

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...