[PATCH 1/1] miitool: add GbE support
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Wed Feb 6 11:10:29 EST 2013
based on
http://ftp.debian.org/debian/pool/main/n/net-tools/net-tools_1.60-24.2.diff.gz
+ fix
barebox at Atmel sama5d3x-ek:/
$ miitool -v -v -v /dev/phy0
negotiated 1000baseT-HD flow-control, link ok
registers for MII PHY:
1140 796d 0022 1611 05e1 cde1 000d 2001
41d9 0300 3c00 8105 2222 0000 0000 3000
0000 00f0 0000 0006 54fe 0000 0000 0200
0000 0000 0000 0000 0000 0000 0000 0348
product info: vendor 00:08:85, model 33 rev 1
basic mode: autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
commands/miitool.c | 62 +++++++++++++++++++++++++++++++++++++---------------
1 file changed, 44 insertions(+), 18 deletions(-)
diff --git a/commands/miitool.c b/commands/miitool.c
index 3a9ac45..207f197 100644
--- a/commands/miitool.c
+++ b/commands/miitool.c
@@ -38,6 +38,8 @@
#include <xfuncs.h>
#include <linux/mii.h>
+#define MII_BASIC_MAX (MII_STAT1000 + 1)
+
static u16 mdio_read(int fd, int offset)
{
int ret;
@@ -66,25 +68,45 @@ static const struct {
const struct {
char *name;
- u_short value;
+ u_short value[2];
} media[] = {
/* The order through 100baseT4 matches bits in the BMSR */
- { "10baseT-HD", ADVERTISE_10HALF },
- { "10baseT-FD", ADVERTISE_10FULL },
- { "100baseTx-HD", ADVERTISE_100HALF },
- { "100baseTx-FD", ADVERTISE_100FULL },
- { "100baseT4", LPA_100BASE4 },
- { "100baseTx", ADVERTISE_100FULL | ADVERTISE_100HALF },
- { "10baseT", ADVERTISE_10FULL | ADVERTISE_10HALF },
+ { "10baseT-HD", {ADVERTISE_10HALF} },
+ { "10baseT-FD", {ADVERTISE_10FULL} },
+ { "100baseTx-HD", {ADVERTISE_100HALF} },
+ { "100baseTx-FD", {ADVERTISE_100FULL} },
+ { "100baseT4", {LPA_100BASE4} },
+ { "100baseTx", {ADVERTISE_100FULL | ADVERTISE_100HALF} },
+ { "10baseT", {ADVERTISE_10FULL | ADVERTISE_10HALF} },
+
+ { "1000baseT-HD", {0, ADVERTISE_1000XHALF} },
+ { "1000baseT-FD", {0, ADVERTISE_1000XFULL} },
+ { "1000baseT", {0, ADVERTISE_1000XHALF | ADVERTISE_1000XFULL} },
};
#define NMEDIA (sizeof(media)/sizeof(media[0]))
-static char *media_list(int mask, int best)
+static char *media_list(unsigned mask, unsigned mask2, int best)
{
static char buf[100];
int i;
*buf = '\0';
+
+ if (mask & BMCR_SPEED1000) {
+ if (mask2 & ADVERTISE_1000HALF) {
+ strcat(buf, " ");
+ strcat(buf, "1000baseT-HD");
+ if (best)
+ goto out;
+ }
+ if (mask2 & ADVERTISE_1000FULL) {
+ strcat(buf, " ");
+ strcat(buf, "1000baseT-FD");
+ if (best)
+ goto out;
+ }
+ }
+
mask >>= 5;
for (i = 4; i >= 0; i--) {
if (mask & (1 << i)) {
@@ -94,7 +116,7 @@ static char *media_list(int mask, int best)
break;
}
}
-
+out:
if (mask & (1 << 5))
strcat(buf, " flow-control");
@@ -105,15 +127,15 @@ static int show_basic_mii(int fd, int verbose)
{
char buf[100];
int i, mii_val[32];
- int bmcr, bmsr, advert, lkpar;
+ unsigned bmcr, bmsr, advert, lkpar, bmcr2, lpa2;
/* Some bits in the BMSR are latched, but we can't rely on being
the only reader, so only the current values are meaningful */
mdio_read(fd, MII_BMSR);
- for (i = 0; i < ((verbose > 1) ? 32 : 8); i++)
+ for (i = 0; i < ((verbose > 1) ? 32 : MII_BASIC_MAX); i++)
mii_val[i] = mdio_read(fd, i);
- if (mii_val[MII_BMCR] == 0xffff) {
+ if (mii_val[MII_BMCR] == 0xffff || mii_val[MII_BMSR] == 0x0000) {
fprintf(stderr, " No MII transceiver present!.\n");
return -1;
}
@@ -123,6 +145,8 @@ static int show_basic_mii(int fd, int verbose)
bmsr = mii_val[MII_BMSR];
advert = mii_val[MII_ADVERTISE];
lkpar = mii_val[MII_LPA];
+ bmcr2 = mii_val[MII_CTRL1000];
+ lpa2 = mii_val[MII_STAT1000];
*buf = '\0';
if (bmcr & BMCR_ANENABLE) {
@@ -130,7 +154,7 @@ static int show_basic_mii(int fd, int verbose)
if (advert & lkpar) {
sprintf(buf, "%s%s, ", (lkpar & LPA_LPACK) ?
"negotiated" : "no autonegotiation,",
- media_list(advert & lkpar, 1));
+ media_list(advert & lkpar, bmcr2 & lpa2 >> 2, 1));
} else {
sprintf(buf, "autonegotiation failed, ");
}
@@ -139,7 +163,9 @@ static int show_basic_mii(int fd, int verbose)
}
} else {
sprintf(buf, "%s Mbit, %s duplex, ",
- (bmcr & BMCR_SPEED100) ? "100" : "10",
+ ((bmcr2 & (ADVERTISE_1000HALF | ADVERTISE_1000FULL)) & lpa2 >> 2)
+ ? "1000"
+ : (bmcr & BMCR_SPEED100) ? "100" : "10",
(bmcr & BMCR_FULLDPLX) ? "full" : "half");
}
@@ -196,15 +222,15 @@ static int show_basic_mii(int fd, int verbose)
if (bmsr & BMSR_RFAULT)
printf("remote fault, ");
printf((bmsr & BMSR_LSTATUS) ? "link ok" : "no link");
- printf("\n capabilities:%s", media_list(bmsr >> 6, 0));
- printf("\n advertising: %s", media_list(advert, 0));
+ printf("\n capabilities:%s", media_list(bmsr >> 6, bmcr2, 0));
+ printf("\n advertising: %s", media_list(advert, lpa2 >> 2, 0));
#define LPA_ABILITY_MASK (LPA_10HALF | LPA_10FULL \
| LPA_100HALF | LPA_100FULL \
| LPA_100BASE4 | LPA_PAUSE_CAP)
if (lkpar & LPA_ABILITY_MASK)
- printf("\n link partner:%s", media_list(lkpar, 0));
+ printf("\n link partner:%s", media_list(lkpar, bmcr2, 0));
printf("\n");
}
--
1.7.10.4
More information about the barebox
mailing list