[PATCH 1/2] net phy: Add support for finding a mdio bus by its name

Jean-Christophe PLAGNIOL-VILLARD plagnioj at jcrosoft.com
Thu Feb 7 11:05:35 EST 2013


On 13:46 Thu 07 Feb     , Sascha Hauer wrote:
> On Thu, Feb 07, 2013 at 01:26:13PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > On 13:20 Thu 07 Feb     , Sascha Hauer wrote:
> > > On Thu, Feb 07, 2013 at 01:02:06PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > > On 12:09 Thu 07 Feb     , Sascha Hauer wrote:
> > > > > Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> > > > > ---
> > > > >  drivers/net/phy/mdio_bus.c |   19 +++++++++++++++++++
> > > > >  include/linux/phy.h        |    3 +++
> > > > >  2 files changed, 22 insertions(+)
> > > > > 
> > > > > diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
> > > > > index d1d802b..3c4be1c 100644
> > > > > --- a/drivers/net/phy/mdio_bus.c
> > > > > +++ b/drivers/net/phy/mdio_bus.c
> > > > > @@ -25,6 +25,8 @@
> > > > >  #include <linux/phy.h>
> > > > >  #include <linux/err.h>
> > > > >  
> > > > > +static LIST_HEAD(mii_bus_list);
> > > > > +
> > > > >  /**
> > > > >   * mdiobus_register - bring up all the PHYs on a given bus and attach them to bus
> > > > >   * @bus: target mii_bus
> > > > > @@ -57,6 +59,8 @@ int mdiobus_register(struct mii_bus *bus)
> > > > >  	if (bus->reset)
> > > > >  		bus->reset(bus);
> > > > >  
> > > > > +	list_add_tail(&bus->list, &mii_bus_list);
> > > > > +
> > > > >  	pr_info("%s: probed\n", dev_name(&bus->dev));
> > > > >  	return 0;
> > > > >  }
> > > > > @@ -71,9 +75,24 @@ void mdiobus_unregister(struct mii_bus *bus)
> > > > >  			unregister_device(&bus->phy_map[i]->dev);
> > > > >  		bus->phy_map[i] = NULL;
> > > > >  	}
> > > > > +
> > > > > +	list_del(&bus->list);
> > > > >  }
> > > > >  EXPORT_SYMBOL(mdiobus_unregister);
> > > > >  
> > > > > +struct mii_bus *mdiobus_find(const char *name)
> > > > > +{
> > > > > +	struct mii_bus *bus;
> > > > > +
> > > > > +	list_for_each_entry(bus, &mii_bus_list, list) {
> > > > 	no use bus_for_each
> > > 
> > > That was my first try until I realized that not the mdio buses are
> > > registered on the mdio_bus_type, but instead the phy devices.
> > so add bus_type the list is already in the device_d so we jsut hav to populate
> > it
> 
> You want to put both the phys and the buses on mdio_bus_type? Or you
> want to introduce a mdio_bus_bus_type?
different

I want to be able to use bus_for_each on each of them seperatly

Best Regards,
J.
> 
> Sascha
> 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the barebox mailing list