[PATCH 19/36] ARM AT91: switch at91rm9200 board to barebox_arm_entry

[Jean-Christophe PLAGNIOL-VILLARD]

From: Sascha Hauer <s.hauer at pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
 arch/arm/mach-at91/Kconfig                    |    1 +
 arch/arm/mach-at91/at91rm9200_lowlevel_init.c |    2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 4e687c4..f54b6dc 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -90,6 +90,7 @@ config SOC_AT91RM9200
 	select HAVE_AT91_DBGU0
 	select HAS_AT91_ETHER
 	select MACH_HAS_LOWLEVEL_INIT
+	select MACH_DO_LOWLEVEL_INIT
 
 config SOC_AT91SAM9260
 	bool
diff --git a/arch/arm/mach-at91/at91rm9200_lowlevel_init.c b/arch/arm/mach-at91/at91rm9200_lowlevel_init.c
index 4add3d9..221c05d 100644
--- a/arch/arm/mach-at91/at91rm9200_lowlevel_init.c
+++ b/arch/arm/mach-at91/at91rm9200_lowlevel_init.c
@@ -129,5 +129,5 @@ void __naked __bare_init reset(void)
 	set_cr(r);
 
 end:
-	board_init_lowlevel_return();
+	barebox_arm_entry(AT91_CHIPSELECT_1, at91rm9200_get_sdram_size(), 0);
 }
-- 
1.7.10.4