December 2010 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Dec 1 05:22:36 EST 2010
Ending: Fri Dec 31 02:24:44 EST 2010
Messages: 227

• [PATCH] STM/MCI: Fix wrong register bit   Juergen Beisert
• [PATCH] i.MX28 architecture inclusion into barebox   Juergen Beisert
• [PATCH 01/14] Make DIV_ROUND_UP macro globally available   Juergen Beisert
• [PATCH 02/14] Add macro for correct rounding in integer devisions   Juergen Beisert
• [PATCH 03/14] STM378x: Use Hz as the clock unit like in all other arch   Juergen Beisert
• [PATCH 04/14] STM378x: Do not configure any pin usage in the driver   Juergen Beisert
• [PATCH 05/14] STM378x: Parameterize the max. possible GPIO number   Juergen Beisert
• [PATCH 06/14] STM378x: Separate i.MX23 clock handling   Juergen Beisert
• [PATCH 07/14] IMX: Ignore i.MX23/i.MX28 related code in shared devices   Juergen Beisert
• [PATCH 08/14] STM378x: Add i.MX28 architecture   Juergen Beisert
• [PATCH 09/14] STM378x: Adapt the serial driver to support i.MX23 and i.MX28   Juergen Beisert
• [PATCH 10/14] STM378x: Adapt the MCI driver to support i.MX23 and i.MX28   Juergen Beisert
• [PATCH 11/14] Fixup the FEC driver files   Juergen Beisert
• [PATCH 12/14] MX28: add FEC support   Juergen Beisert
• [PATCH 13/14] STM378x: Add TX28 CPU module   Juergen Beisert
• [PATCH 14/14] STM378x: Add the TX28 Starterkit-5 baseboard   Juergen Beisert
• nand_boot_test problem   Juergen Beisert
• [PATCH] Add support for runtime selection of video mode in barebox   Juergen Beisert
• [PATCH 01/10] Add more useful generic macros   Juergen Beisert
• [PATCH 02/10] ARM Chumby: Fix memory index   Juergen Beisert
• [PATCH 03/10] ARM Chumby: Fix unit of the clocks after the change to Hz   Juergen Beisert
• [PATCH 04/10] ARM Chumby: Just fix some typos   Juergen Beisert
• [PATCH 05/10] Fix default framebuffer 'enable' set   Juergen Beisert
• [PATCH 06/10] Add the feature to change the video mode at runtime   Juergen Beisert
• [PATCH 07/10] ARM STM/i.MX: Add a pixel clock calculation routine for i.MX23/i.MX28   Juergen Beisert
• [PATCH 08/10] ARM STM/i.MX: Add video driver for i.MX23/i.MX28   Juergen Beisert
• [PATCH 09/10] ARM KARO-TX28-STK5: Add a user for video graphics support on i.MX28   Juergen Beisert
• [PATCH 10/10] ARM Chumby-Falconwing: Add a user for video graphics support on i.MX23   Juergen Beisert
• [PATCH 10] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform.   Juergen Beisert
• [PATCH] Add gpio command support to STM/i.MX arch   Juergen Beisert
• [PATCH 1/9] Fix a typo in the GPIO doc   Juergen Beisert
• [PATCH 2/9] ARM STM/i.MX: Fix register offset calculation for GPIO input pins   Juergen Beisert
• [PATCH 3/9] ARM STM/i.MX: Remove variable size restrictions in iomux managing routines   Juergen Beisert
• [PATCH 4/9] ARM STM/i.MX: Setting the iomux needs at least 32 bit.   Juergen Beisert
• [PATCH 5/9] ARM STM/i.MX: Just fix the docs   Juergen Beisert
• [PATCH 6/9] ARM STM/i.MX: Add support for the gpio commands   Juergen Beisert
• [PATCH 7/9] ARM STM/i.MX: Avoid very long lines   Juergen Beisert
• [PATCH 8/9] ARM STM/i.MX: Replace cryptic numbers   Juergen Beisert
• [PATCH 9/9] ARM Chumby: Add list of available GPIOs and their meaning   Juergen Beisert
• [PATCH] Add gpio command support to STM/i.MX arch   Juergen Beisert
• x86 compilation broken in next branch   Juergen Beisert
• [PATCH] arm: mini2440: Add memory size.   Marek Belisko
• 4096 page NAND boot support on iMX35 PDK board   Boaz Ben-David
• 4096 page NAND boot support on iMX35 PDK board   Boaz Ben-David
• 4096 page NAND boot support on iMX35 PDK board   Boaz Ben-David
• 4096 page NAND boot support on iMX35 PDK board   Boaz Ben-David
• 4096 page NAND boot support on iMX35 PDK board   Boaz Ben-David
• [PATCH] Add gpio command support to STM/i.MX arch   Eric Bénard
• 4096 page NAND boot support on iMX35 PDK board   Eric Bénard
• 4096 page NAND boot support on iMX35 PDK board   Eric Bénard
• 4096 page NAND boot support on iMX35 PDK board   Eric Bénard
• [PATCH] Add gpio command support to STM/i.MX arch   Gregory CLEMENT
• [PATCH] Add gpio command support to STM/i.MX arch   Gregory CLEMENT
• Nand support on STM/i.MX (especially iMX23)   Gregory CLEMENT
• [PATCH 08/10] ARM STM/i.MX: Add video driver for i.MX23/i.MX28   Gregory CLEMENT
• Barebox on a 3730   Orjan Friberg
• Barebox on a 3730   Orjan Friberg
• Barebox on a 3730   Orjan Friberg
• Barebox on a 3730   Orjan Friberg
• Barebox on a 3730   Orjan Friberg
• Barebox on a 3730   Orjan Friberg
• Barebox on a 3730   Orjan Friberg
• Barebox on a 3730   Orjan Friberg
• my IXP4xx-related and other patches   Krzysztof Halasa
• [PATCH 1] Delete unused file common/dlmalloc.src.   Krzysztof Halasa
• [PATCH 2] Remove unused eth_get_name() prototype.   Krzysztof Halasa
• [PATCH 3] Flash CFI: removed unused 'size' variable.   Krzysztof Halasa
• [PATCH 4] Fix help text for "loadb" and "loady" commands.   Krzysztof Halasa
• [PATCH 5] Fix error handling with malloc, memalign etc. Memalign() can't fail now.   Krzysztof Halasa
• [PATCH 6] ARM: support big/little endian switching in "bootz".   Krzysztof Halasa
• [PATCH 7] Fix top-level Makefile to work with GNU make 3.82.   Krzysztof Halasa
• [PATCH 8] Cosmetic fixes, including format attributes for printf() and friends.   Krzysztof Halasa
• [PATCH 9] ARM: support big-endian processors.   Krzysztof Halasa
• [PATCH 10] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform.   Krzysztof Halasa
• [PATCH 11] Silence few warnings.   Krzysztof Halasa
• [PATCH 12] Fix NOR CFI flash driver to work on big endian systems.   Krzysztof Halasa
• [PATCH 13] Fix usage of __LITTLE_ENDIAN macro.   Krzysztof Halasa
• [PATCH 10] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform.   Krzysztof Halasa
• [PATCH 5a] Fix error handling with malloc, memalign etc. Introduce xmemalign().   Krzysztof Halasa
• [PATCH 6a] ARM: support big/little endian switching in "bootz".   Krzysztof Halasa
• [PATCH 10a] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform.   Krzysztof Halasa
• [PATCH 6] ARM: support big/little endian switching in "bootz".   Krzysztof Halasa
• [PATCH 5] Fix error handling with malloc, memalign etc. Memalign() can't fail now.   Krzysztof Halasa
• [PATCH 10] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform.   Krzysztof Halasa
• [PATCH 10] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform.   Krzysztof Halasa
• [PATCH 5] Fix error handling with malloc, memalign etc. Memalign() can't fail now.   Krzysztof Halasa
• [PATCH 10] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform.   Krzysztof Halasa
• v2010.12.0   Sascha Hauer
• [PATCH] arm: Introduce VPR200 board   Sascha Hauer
• [PATCH] remove redundant .gitignore entries   Sascha Hauer
• [PATCH] remove redundant .gitignore entries   Sascha Hauer
• [PATCH 03/34] doc: add documentation for 'unlzo' command   Sascha Hauer
• LED framework   Sascha Hauer
• [PATCH 1/7] Add generic poll infrastructure   Sascha Hauer
• [PATCH 2/7] basic LED support   Sascha Hauer
• [PATCH 3/7] LED: Add gpio LED support   Sascha Hauer
• [PATCH 4/7] LED: Add LED trigger support   Sascha Hauer
• [PATCH 5/7] LED: Add led command   Sascha Hauer
• [PATCH 6/7] LED: Add trigger command   Sascha Hauer
• [PATCH 7/7] pcm038: led testing. Not to be committed   Sascha Hauer
• [PATCH 1/7] Add generic poll infrastructure   Sascha Hauer
• [PATCH 2/7] basic LED support   Sascha Hauer
• [PATCH 3/7] LED: Add gpio LED support   Sascha Hauer
• [PATCH 4/7] LED: Add LED trigger support   Sascha Hauer
• [PATCH 5/7] LED: Add led command   Sascha Hauer
• [PATCH 2/7] basic LED support   Sascha Hauer
• [PATCH v2] LED support   Sascha Hauer
• [PATCH 1/8] cfi flash driver: check for ctrl-c during erase   Sascha Hauer
• [PATCH 2/8] Add generic poll infrastructure   Sascha Hauer
• [PATCH 3/8] basic LED support   Sascha Hauer
• [PATCH 4/8] LED: Add gpio LED support   Sascha Hauer
• [PATCH 5/8] LED: Add LED trigger support   Sascha Hauer
• [PATCH 6/8] LED: Add led command   Sascha Hauer
• [PATCH 7/8] LED: Add trigger command   Sascha Hauer
• [PATCH 8/8] ARM pcm043 board: Add LED support   Sascha Hauer
• nand_boot_test problem   Sascha Hauer
• [PATCH 6] ARM: support big/little endian switching in "bootz".   Sascha Hauer
• [PATCH 10] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform.   Sascha Hauer
• [PATCH 5] Fix error handling with malloc, memalign etc. Memalign() can't fail now.   Sascha Hauer
• my IXP4xx-related and other patches   Sascha Hauer
• [PATCH 10] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform.   Sascha Hauer
• [PATCH 1] Delete unused file common/dlmalloc.src.   Sascha Hauer
• [PATCH 10] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform.   Sascha Hauer
• [PATCH 12] Fix NOR CFI flash driver to work on big endian systems.   Sascha Hauer
• [PATCH 5] Fix error handling with malloc, memalign etc. Memalign() can't fail now.   Sascha Hauer
• [PATCH 6] ARM: support big/little endian switching in "bootz".   Sascha Hauer
• [PATCH] Add a board specific fancy banner   Franck JULLIEN
• [PATCH] (reformated) Allow board specific fancy banner   Franck JULLIEN
• [PATCH] Add an option to set a board specific banner   Franck JULLIEN
• [PATCH] STM/MCI: Fix wrong register bit   Uwe Kleine-König
• [PATCH] Add gpio command support to STM/i.MX arch   Uwe Kleine-König
• [PATCH] Add a board specific fancy banner   Uwe Kleine-König
• [PATCH] (reformated) Allow board specific fancy banner   Uwe Kleine-König
• [PATCH] console_simple: add fprintf / console_list for commands/loadb.c   Peter Korsgaard
• Phytec's phyCARD-S-i.MX27   Stephane List
• Barebox on a 3730   Belisko Marek
• Barebox on a 3730   Belisko Marek
• [PATCH] arm: Introduce VPR200 board   Belisko Marek
• [PATCH 4/7] LED: Add LED trigger support   Belisko Marek
• [PATCH 2/7] basic LED support   Belisko Marek
• nand_boot_test problem   Belisko Marek
• nand_boot_test problem   Belisko Marek
• [PATCH 10] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform.   Belisko Marek
• x86 compilation broken in next branch   Belisko Marek
• [PATCH 0/12] cfi_flash: improvment   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm: update mach-types   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm: Introduce VPR200 board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm: update mach-types   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] Add basic support from ARM Versatile/PB   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] basic LED support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] LED: Add gpio LED support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] LED: Add led command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] basic LED support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5] Fix error handling with malloc, memalign etc. Memalign() can't fail now.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6] ARM: support big/little endian switching in "bootz".   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 12] Fix NOR CFI flash driver to work on big endian systems.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform.   Jean-Christophe PLAGNIOL-VILLARD
• Determining barebox version from linux   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] Add a board specific fancy banner   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] (reformated) Allow board specific fancy banner   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] (reformated) Allow board specific fancy banner   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] Add an option to set a board specific banner   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] common: fix 'dummy' is used uninitialized in this function warning   Fabio Porcedda
• loady command failure   Fabio Porcedda
• [PATCH v2] xyzModem.c: fix 'dummy' is used uninitialized in this function warning   Fabio Porcedda
• Barebox on a 3730   Premi, Sanjeev
• Barebox on a 3730   Premi, Sanjeev
• Barebox on a 3730   Premi, Sanjeev
• Barebox on a 3730   Premi, Sanjeev
• Barebox on a 3730   Premi, Sanjeev
• [PATCH 0/6] omap3: Support for silicon revisions   Sanjeev Premi
• [PATCH 1/6] omap3: Add macros to extract hawkeye and version   Sanjeev Premi
• [PATCH 2/6] omap3: Detect cpu based on hawkeye   Sanjeev Premi
• [PATCH 3/6] omap3: Update method to detect si revision   Sanjeev Premi
• [PATCH 4/6] omap3: Add DPLL tables for silicon rev 1 and 2   Sanjeev Premi
• [PATCH 5/6] omap3: Define separate functions for DPLL configuration   Sanjeev Premi
• [PATCH 6/6] omap3: Select DPLL tables based on cpu revision   Sanjeev Premi
• [PATCH] omap34x: Add suffix to DPLL tables and related function   Sanjeev Premi
• [PATCH] arm: update mach-types   Marc Reilly
• [PATCH] arm: Introduce VPR200 board   Marc Reilly
• [PATCH] arm: update mach-types   Marc Reilly
• [PATCH] arm: Introduce VPR200 board   Marc Reilly
• [PATCH] imx: add IMX_GPIO_NR macro.   Marc Reilly
• [PATCH 2/7] basic LED support   Marc Reilly
• Determining barebox version from linux   Marc Reilly
• More Documentation Patches   Robert Schwebel
• [PATCH 01/34] doc: remove non-existing references   Robert Schwebel
• [PATCH 02/34] doc: add documentation for 'version' command   Robert Schwebel
• [PATCH 03/34] doc: add documentation for 'unlzo' command   Robert Schwebel
• [PATCH 04/34] doc: add documentation for 'umount' command   Robert Schwebel
• [PATCH 05/34] doc: add documentation for 'usb' command   Robert Schwebel
• [PATCH 06/34] doc: add documentation for ubi commands   Robert Schwebel
• [PATCH 07/34] doc: add documentation for 'timeout' command   Robert Schwebel
• [PATCH 08/34] doc: add documentation for 'true' command   Robert Schwebel
• [PATCH 09/34] doc: add documentation for 'sleep' command   Robert Schwebel
• [PATCH 10/34] doc: add documentation for 'rm' command   Robert Schwebel
• [PATCH 11/34] doc: add documentation for 'rmdir' command   Robert Schwebel
• [PATCH 12/34] doc: add documentation for 'mkdir' command   Robert Schwebel
• [PATCH 13/34] doc: add documentation for 'test' command   Robert Schwebel
• [PATCH 14/34] doc: add documentation for 'lsmod' command   Robert Schwebel
• [PATCH 15/34] doc: add documentation for 'readline' command   Robert Schwebel
• [PATCH 16/34] doc: add documentation for 'insmod' command   Robert Schwebel
• [PATCH 17/34] doc: add documentation for 'help' command   Robert Schwebel
• [PATCH 18/34] doc: add documentation for 'pwd' command   Robert Schwebel
• [PATCH 19/34] doc: add documentation for 'false' command   Robert Schwebel
• [PATCH 20/34] doc: add documentation for 'exec' command   Robert Schwebel
• [PATCH 21/34] doc: add documentation for 'reset' command   Robert Schwebel
• [PATCH 22/34] doc: add documentation for 'reginfo' command   Robert Schwebel
• [PATCH 23/34] doc: add documentation for 'meminfo' command   Robert Schwebel
• [PATCH 24/34] doc: add documentation for 'go' command   Robert Schwebel
• [PATCH 25/34] doc: add documentation for 'source' command   Robert Schwebel
• [PATCH 26/34] doc: add documentation for 'sh' command   Robert Schwebel
• [PATCH 27/34] doc: add documentation for 'ping' command   Robert Schwebel
• [PATCH 28/34] doc: add documentation for 'nfs' command   Robert Schwebel
• [PATCH 29/34] doc: add documentation for 'rarpboot' command   Robert Schwebel
• [PATCH 30/34] doc: add documentation for 'passwd' command   Robert Schwebel
• [PATCH 31/34] doc: add documentation for 'nand' command   Robert Schwebel
• [PATCH 32/34] doc: add documentation for 'mw' command   Robert Schwebel
• [PATCH 33/34] doc: add documentation for 'memcmp' command   Robert Schwebel
• [PATCH 34/34] doc: add documentation for 'md' command   Robert Schwebel
• Nand support on STM/i.MX (especially iMX23)   Robert Schwebel
• [PATCH] remove redundant .gitignore entries   Baruch Siach
• [PATCH] remove redundant .gitignore entries   Baruch Siach
• [PATCH] eth: fix 'warning: No MAC address set' when using EEPROM MAC   Baruch Siach
• Determining barebox version from linux   Baruch Siach
• Nand support on STM/i.MX (especially iMX23)   Baruch Siach

Last message date: Fri Dec 31 02:24:44 EST 2010
Archived on: Thu Jan 6 21:33:27 EST 2011

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...