[PATCH] arm: Introduce VPR200 board

[Belisko Marek]

On Fri, Dec 10, 2010 at 7:48 AM, Jean-Christophe PLAGNIOL-VILLARD
<plagnioj at jcrosoft.com> wrote:
> On 16:42 Fri 10 Dec     , Marc Reilly wrote:
>> Starting point for the vpr200 board.
>> Very similar core hardware to mx35 3stack.
>>
>> Signed-off-by: Marc Reilly <marc at cpdesign.com.au>
>> ---
>>  arch/arm/Makefile                            |    1 +
>>  arch/arm/boards/vpr200/Makefile              |    4 +
>>  arch/arm/boards/vpr200/config.h              |   28 +
>>  arch/arm/boards/vpr200/env/bin/_update       |   39 ++
>>  arch/arm/boards/vpr200/env/bin/boot          |   67 ++
>>  arch/arm/boards/vpr200/env/bin/hush_hack     |    1 +
>>  arch/arm/boards/vpr200/env/bin/init          |   38 +
>>  arch/arm/boards/vpr200/env/bin/update_kernel |   15 +
>>  arch/arm/boards/vpr200/env/bin/update_rootfs |   20 +
> con u use the defaultenv?
>>  arch/arm/boards/vpr200/env/config            |   46 ++
>>  arch/arm/boards/vpr200/flash_header.c        |   46 ++
>>  arch/arm/boards/vpr200/lowlevel.c            |  255 +++++++
>>  arch/arm/boards/vpr200/vpr200.c              |  929 ++++++++++++++++++++++++++
>>  arch/arm/boards/vpr200/vpr200.dox            |   10 +
>>  arch/arm/configs/vpr200_defconfig            |   60 ++
>>  arch/arm/mach-imx/Kconfig                    |   13 +
>>  16 files changed, 1572 insertions(+), 0 deletions(-)
>>  create mode 100644 arch/arm/boards/vpr200/Makefile
>>  create mode 100644 arch/arm/boards/vpr200/config.h
>>  create mode 100644 arch/arm/boards/vpr200/env/bin/_update
>>  create mode 100644 arch/arm/boards/vpr200/env/bin/boot
>>  create mode 100644 arch/arm/boards/vpr200/env/bin/hush_hack
>>  create mode 100644 arch/arm/boards/vpr200/env/bin/init
>>  create mode 100644 arch/arm/boards/vpr200/env/bin/update_kernel
>>  create mode 100644 arch/arm/boards/vpr200/env/bin/update_rootfs
>>  create mode 100644 arch/arm/boards/vpr200/env/config
>>  create mode 100644 arch/arm/boards/vpr200/flash_header.c
>>  create mode 100644 arch/arm/boards/vpr200/lowlevel.c
>>  create mode 100644 arch/arm/boards/vpr200/vpr200.c
>>  create mode 100644 arch/arm/boards/vpr200/vpr200.dox
>>  create mode 100644 arch/arm/configs/vpr200_defconfig
>>
>> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
>> index 9729c23..6e6be98 100644
>> --- a/arch/arm/Makefile
>> +++ b/arch/arm/Makefile
>> @@ -91,6 +91,7 @@ board-$(CONFIG_MACH_CHUMBY)                 := chumby_falconwing
>>  board-$(CONFIG_MACH_FREESCALE_MX51_PDK)              := freescale-mx51-pdk
>>  board-$(CONFIG_MACH_GUF_CUPID)                       := guf-cupid
>>  board-$(CONFIG_MACH_MINI2440)                        := mini2440
>> +board-$(CONFIG_MACH_VPR200)                  := vpr200
>>
>>  machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
>>
>> +static int do_diagled(struct command *cmdtp, int argc, char *argv[])
>> +{
>> +     int color;
>> +
>> +     if (argc != 2)
>> +             return COMMAND_ERROR_USAGE;
>> +
>> +     color = simple_strtoul(argv[1], NULL, 0);
>> +     vpr_diag_set_color(color);
>> +
>> +     return 0;
>> +}
> it will be better to have a common API for led management
>> +
>> +BAREBOX_CMD_HELP_START(diagled)
>> +BAREBOX_CMD_HELP_USAGE("diagled [color]\n")
>> +BAREBOX_CMD_HELP_SHORT("Sets the color of the diagnostic LED.\n")
>> +BAREBOX_CMD_HELP_TEXT("\toff\t 0\n")
>> +BAREBOX_CMD_HELP_TEXT("\tblue\t 1\n")
>> +BAREBOX_CMD_HELP_TEXT("\tgreen\t 2\n")
>> +BAREBOX_CMD_HELP_TEXT("\taqua\t 3\n")
>> +BAREBOX_CMD_HELP_TEXT("\tred\t 4\n")
>> +BAREBOX_CMD_HELP_TEXT("\tmagenta\t 5\n")
>> +BAREBOX_CMD_HELP_TEXT("\tyellow\t 6\n")
>> +BAREBOX_CMD_HELP_TEXT("\twhite\t 7\n")
>> +BAREBOX_CMD_HELP_END
>> +
>> +BAREBOX_CMD_START(diagled)
>> +     .cmd            = do_diagled,
>> +     .usage          = "Set color of diagnositc tri-color LED",
>> +     BAREBOX_CMD_HELP(cmd_diagled_help)
>> +BAREBOX_CMD_END
>> +
>> +/* ------------------------------------------------------------------------ */
>> +
>> +static int do_waitbutton(struct command *cmdtp, int argc, char *argv[])
>> +{
>> +     int opt;
>> +     uint64_t start;
>> +     ulong timeout = 0;
>> +     uint32_t bstate;
>> +
>> +     while ((opt = getopt(argc, argv, "t:")) > 0) {
>> +             switch (opt) {
>> +             case 't':
>> +                     timeout = simple_strtol(optarg, NULL, 0);
>> +                     break;
>> +             }
>> +     }
>> +
>> +     start = get_time_ns();
>> +     while (!timeout || !is_timeout(start, timeout * SECOND)) {
>> +             bstate = vpr_button_state();
>> +             if (bstate) {
>> +                     printf("%d\n", vpr_button_state_to_number(bstate));
>> +                     return 0;
>> +             }
>> +             if (ctrlc())
>> +                     return -EINTR;
>> +     }
>> +
>> +     return -ETIMEDOUT;
>> +}
> ditto here
>> +
>> +BAREBOX_CMD_HELP_START(waitbutton)
>> +BAREBOX_CMD_HELP_USAGE("waitbutton [-t]\n")
>> +BAREBOX_CMD_HELP_SHORT("Prints the button number of the next pressed button.\n")
>> +BAREBOX_CMD_HELP_OPT("-t <seconds>", "time in seconds to wait. 0 (default) is forever.")
>> +BAREBOX_CMD_HELP_END
>
> please also check your patch you have some whitespace and other too long line
> issue
FYI can be used checkpatch.pl in scripts directory ;)
>
> Best Regards,
> J.
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>

thanks,

marek

-- 
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
icq: 290551086
web: http://open-nandra.com