Barebox on a 3730

[Belisko Marek]

On Fri, Dec 3, 2010 at 8:23 AM, Orjan Friberg <of at flatfrog.com> wrote:
> On 2010-12-02 19:34, Premi, Sanjeev wrote:
>>>
>>> I haven't found any 3530 vs. 3730 diffs in the uart configuration in
>>> u-boot or linux (though there is a silicon errata fix in the latest
>>> linux-omap-2.6 kernel related to not reading from an empty FIFO).
>>>
>> Look for the AM37x TRM here:
>> http://focus.ti.com/docs/prod/folders/print/am3715.html
>
> Any specific section you were thinking of?  I did look in the UART section
> of the TRM before and established that it was still driven by a 48 MHz
> clock.
Yes clock for UART is also 48Mhz. I think difference is how to setup main clock
which will be then also used for UART. Just quessing you have latest beagleboard
revision which have 3730?
>
> --
> Orjan Friberg
> FlatFrog Laboratories AB
>

thanks,

marek

-- 
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
icq: 290551086
web: http://open-nandra.com