loady command failure

[Fabio Porcedda]

Hi all,
I'm using Barebox v2010.12.0 (at91sam9260ek_defconfig + loadb + loady)
compiled with codesourcery 2010.q1 on the board Atmel AT91SAM9260-EK,

the loadb command it's woking fine,
but the loady command fails every time, with ckermit and minicom (Ubuntu 10.10):

kermit log:"
Retry 0: NAK on sector
...
Retry 0: NAK on sector
Retry 0: Retry Count Exceeded

Transfer incomplete

*************************
SEND-class command failed.
 Packets sent: 166
 Retransmissions: 0
 Timeouts: 0
 Damaged packets: 0
"

The loadb/loady command of U-Boot v2010.09 on the same AT91SAM9260-EK is working fine.

HW/SW Configuration:
PC: Ubuntu 10.10 + ckermit (211-14) + minicom (2.4-2ubuntu1)

.kermrc:
set line /dev/ttyS0
set speed 115200
set carrier-watch off
set handshake none
set flow-control none
robust
set file type bin
set file name lit
set rec pack 1000
set send pack 1000
set window 5

minicom config:
Bps/Par/Bits       : 115200 8N1
Hardware Flow Control : No
Software Flow Control : No


Thanks in advance for any help
Fabio Porcedda
Software Devoloper - R&D Cagliari
Telit Communications S.p.A.