January 2017 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sun Jan 1 12:16:08 PST 2017
Ending: Tue Jan 31 13:54:43 PST 2017
Messages: 171

• 9984 VHT   Sebastian Gottschall
• [1/2] ath10k: add accounting for the extended peer statistics   Mohammed Shafi Shajakhan
• [1/2] ath10k: add accounting for the extended peer statistics   Christian Lamparter
• [1/2] ath10k: add accounting for the extended peer statistics   Valo, Kalle
• [1/2] ath10k: add accounting for the extended peer statistics   Kalle Valo
• [1/2] ath10k: htc: Removal of unused struct members   Kalle Valo
• [1/3] ath10k: remove multiple defines of DIAG_TRANSFER_LIMIT   Kalle Valo
• [ath6kl:pending 42/54] drivers/net/wireless/ath/ath10k/sdio.c:450:45: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'unsigned int'   kbuild test robot
• [ath6kl:pending 42/54] drivers/net/wireless/ath/ath10k/sdio.h:44:47: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'unsigned int'   kbuild test robot
• [ath6kl:pending 43/54] drivers/net/wireless/ath/ath10k/bmi.c:140:64: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'unsigned int'   kbuild test robot
• [ath6kl:pending 43/54] drivers/net/wireless/ath/ath10k/bmi.c:141:8: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int'   kbuild test robot
• [ath6kl:pending 49/54] drivers/net/wireless/ath/ath10k/htt_tx.c:733:22: note: in expansion of macro '__cpu_to_le32'   kbuild test robot
• [ath6kl:pending 49/54] drivers/net/wireless/ath/ath10k/htt_tx.c:733:2: warning: large integer implicitly truncated to unsigned type   kbuild test robot
• [OpenWrt-Devel] ath10k mesh + ap + encryption?   Sven Eckelmann
• [PATCH 1/3] ath10k: remove multiple defines of DIAG_TRANSFER_LIMIT   Srinivas Kandagatla
• [PATCH 2/3] ath10k: use dma_zalloc_coherent()   Srinivas Kandagatla
• [PATCH 2/3] ath10k: use dma_zalloc_coherent()   Joe Perches
• [PATCH 2/3] ath10k: use dma_zalloc_coherent()   Valo, Kalle
• [PATCH 2/3] ath10k: use dma_zalloc_coherent()   Joe Perches
• [PATCH 2/3] ath10k: use dma_zalloc_coherent()   Valo, Kalle
• [PATCH 2/4] cfg80211: Add new NL80211_CMD_SET_BTCOEX_PRIORITY to support BTCOEX   Johannes Berg
• [PATCH 2/4] cfg80211: Add new NL80211_CMD_SET_BTCOEX_PRIORITY to support BTCOEX   Tamizh chelvam
• [PATCH 2/4] cfg80211: Add new NL80211_CMD_SET_BTCOEX_PRIORITY to support BTCOEX   Johannes Berg
• [PATCH 2/4] cfg80211: Add new NL80211_CMD_SET_BTCOEX_PRIORITY to support BTCOEX   Tamizh chelvam
• [PATCH 2/4] cfg80211: Add new NL80211_CMD_SET_BTCOEX_PRIORITY to support BTCOEX   Johannes Berg
• [PATCH 2/4] cfg80211: Add new NL80211_CMD_SET_BTCOEX_PRIORITY to support BTCOEX   Tamizh chelvam
• [PATCH 3/3] ath10k: fix typo in addr calculation   Srinivas Kandagatla
• [PATCH] ath10k: Add debugfs support to get per peer tids log via tracing   c_mkenna at qti.qualcomm.com
• [PATCH] ath10k: dump Copy Engine registers during firmware crash   Kalle Valo
• [PATCH] ath10k: fix boot failure in UTF mode/testmode   c_traja at qti.qualcomm.com
• [PATCH] ath10k: Fix per station tx bit rate reporting   Mohammed Shafi Shajakhan
• [PATCH] ath10k: fix reading sram contents for QCA4019   Ashok Raj Nagarajan
• [PATCH] ath10k: Fix Tx legacy rate reporting   Mohammed Shafi Shajakhan
• [PATCH] ath10k: Fix wifi connectivity and warning in Rx with channel 169   Mohammed Shafi Shajakhan
• [PATCH] ath10k: prevent sta pointer rcu violation   Michal Kazior
• [PATCH] ath10k: prevent sta pointer rcu violation   Johannes Berg
• [PATCH] ath10k: prevent sta pointer rcu violation   Michal Kazior
• [PATCH] ath10k: prevent sta pointer rcu violation   Johannes Berg
• [PATCH] ath10k: prevent sta pointer rcu violation   Michal Kazior
• [PATCH] ath10k: Search SMBIOS for OEM board file extension   Waldemar Rymarkiewicz
• [PATCH] ath10k: Search SMBIOS for OEM board file extension   kbuild test robot
• [PATCH] ath10k: Search SMBIOS for OEM board file extension   Waldemar Rymarkiewicz
• [PATCH v2 1/2] cfg80211: Add support to set tx power for a station associated   Ashok Raj Nagarajan
• [PATCH v2 1/2] cfg80211: Add support to set tx power for a station associated   Ben Greear
• [PATCH v2 2/2] mac80211: store tx power value from user to station   Ashok Raj Nagarajan
• [PATCH v2 2/2] mac80211: store tx power value from user to station   Ben Greear
• [PATCH v2] ath10k: add support for controlling tx power to a station   Ashok Raj Nagarajan
• [PATCH v2] ath10k: add support for controlling tx power to a station   Ben Greear
• [PATCH v2] ath10k: add support for controlling tx power to a station   kbuild test robot
• [PATCH v2] ath10k: add support for controlling tx power to a station   kbuild test robot
• [PATCHv2] ath10k: fix boot failure in UTF mode/testmode   c_traja at qti.qualcomm.com
• [PATCHv2] ath10k: fix boot failure in UTF mode/testmode   Greg KH
• [PATCH v2] ath10k: Search SMBIOS for OEM board file extension   Waldemar Rymarkiewicz
• [PATCHv3] ath10k: fix boot failure in UTF mode/testmode   c_traja at qti.qualcomm.com
• [PATCH v3] ath10k: Fix crash during rmmod when probe firmware fails   Valo, Kalle
• [PATCH v3] ath10k: Fix crash during rmmod when probe firmware fails   Valo, Kalle
• [RFC 00/10] ath10k usb support   Erik Stromdahl
• [RFC 01/10] ath10k: various usb related definitions   Erik Stromdahl
• [RFC 02/10] ath10k: usb support   Erik Stromdahl
• [RFC 03/10] ath10k: high_latency detection   Erik Stromdahl
• [RFC 04/10] ath10k: new fw fetch functionality   Erik Stromdahl
• [RFC 05/10] ath10k: htt: RX ring config HL support   Erik Stromdahl
• [RFC 06/10] ath10k: disable frame aggregation for high latency   Erik Stromdahl
• [RFC 07/10] ath10k: per target configurablity of various items   Erik Stromdahl
• [RFC 08/10] ath10k: add start_once support   Erik Stromdahl
• [RFC 09/10] ath10k: htt: High latency TX support   Erik Stromdahl
• [RFC 10/10] ath10k: htt: High latency RX support   Erik Stromdahl
• [RFC] ath10k: silence firmware file probing warnings   Kalle Valo
• [RFC] ath10k: silence firmware file probing warnings   Michal Kazior
• [RFC] ath10k: silence firmware file probing warnings   Kalle Valo
• [RFC v3 0/8] ath10k sdio support   Erik Stromdahl
• [RFC v3 0/8] ath10k sdio support   Valo, Kalle
• [RFC v3 1/8] ath10k: htc: made static function public   Erik Stromdahl
• [RFC v3 2/8] ath10k: htc: rx trailer lookahead support   Erik Stromdahl
• [RFC v3 3/8] ath10k: htc: move htc ctrl ep connect to htc_init   Erik Stromdahl
• [RFC v3 4/8] ath10k: htc: refactorization   Erik Stromdahl
• [RFC v3 5/8] ath10k: various sdio related definitions   Erik Stromdahl
• [RFC v3 6/8] ath10k: sdio support   Erik Stromdahl
• [RFC v3 7/8] ath10k: sdio get target info   Erik Stromdahl
• [RFC v3 8/8] ath10k: htc: ready_ext msg support   Erik Stromdahl
• [v2,1/2] ath10k: refactor ath10k_peer_assoc_h_phymode()   Kalle Valo
• [v2] ath10k: Search SMBIOS for OEM board file extension   Kalle Valo
• All '0' in agg_status   김광민
• All '0' in agg_status   Adrian Chadd
• Re: All '0' in agg_status   Kwang Min Kim
• ath10k + OpenWRT + ath10k firmware 10.2.2.60.14 - Crash   Kevin Dious
• ath10k + OpenWRT + ath10k firmware 10.2.2.60.14 - Crash   Adrian Chadd
• ath10k + OpenWRT + ath10k firmware 10.2.2.60.14 - Crash   Kevin Dious
• ath10k + OpenWRT + ath10k firmware 10.2.2.60.14 - Crash   Adrian Chadd
• ath10k + OpenWRT + ath10k firmware 10.2.2.60.14 - Crash   Kevin Dious
• ath10k: dump Copy Engine registers during firmware crash   Kalle Valo
• ath10k: Fix per station tx bit rate reporting   Kalle Valo
• ath10k: Fix Tx legacy rate reporting   Kalle Valo
• ath10k: Fix wifi connectivity and warning in Rx with channel 169   Kalle Valo
• ath10k: prevent sta pointer rcu violation   Kalle Valo
• ath10k: problem mac80211 tid?   김광민
• ath10k: problem mac80211 tid?   김광민
• ath10k failing with firmware RM.4.4-00022-QCARMSWPZ-2 on QCA6174 (Killer 1535)   Chris Le Sueur
• ath10k failing with firmware RM.4.4-00022-QCARMSWPZ-2 on QCA6174 (Killer 1535)   Bartosz Markowski
• ath10k failing with firmware RM.4.4-00022-QCARMSWPZ-2 on QCA6174 (Killer 1535)   Chris Le Sueur
• ath10k failing with firmware RM.4.4-00022-QCARMSWPZ-2 on QCA6174 (Killer 1535)   Hsu, Ryan
• ath10k usb support   Erik Stromdahl
• ath9k/ath10k DFS testing / certification   Adrian Chadd
• ath9k/ath10k DFS testing / certification   Jean-Pierre Tosoni
• ath9k/ath10k DFS testing / certification   Adrian Chadd
• ath9k/ath10k DFS testing / certification   Simon Wunderlich
• ath9k/ath10k DFS testing / certification   Jean-Pierre Tosoni
• ath9k/ath10k DFS testing / certification   Adrian Chadd
• ath9k/ath10k DFS testing / certification   Simon Wunderlich
• ath9k/ath10k DFS testing / certification   Adrian Chadd
• ath9k/ath10k DFS testing / certification   Jean-Pierre Tosoni
• ath9k/ath10k DFS testing / certification   Adrian Chadd
• ath9k/ath10k DFS testing / certification   Jean-Pierre Tosoni
• ath9k/ath10k DFS testing / certification   Adrian Chadd
• ath9k/ath10k DFS testing / certification   Jean-Pierre Tosoni
• Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2   Xavier Bestel
• Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2   Michal Kazior
• Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2   Xavier Bestel
• Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2   Xavier Bestel
• Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2   Michal Kazior
• Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2   Xavier Bestel
• Driver support for QCA6174 chip using SDIO interface   Akesh M Chacko
• Driver support for QCA6174 chip using SDIO interface   Valo, Kalle
• Driver support for QCA6174 chip using SDIO interface   Erik Stromdahl
• Driver support for QCA6174 chip using SDIO interface   Akesh M Chacko
• Incomplete scan results after rf(un)kill   Daniel J Blueman
• Incomplete scan results after rf(un)kill   Valo, Kalle
• Incomplete scan results after rf(un)kill   Daniel J Blueman
• Incomplete scan results after rf(un)kill   Valo, Kalle
• Incomplete scan results after rf(un)kill   Daniel J Blueman
• QCA4019: calibration files and board files   Sven Eckelmann
• QCA4019: calibration files and board files   Sven Eckelmann
• QCA4019: calibration files and board files   Adrian Chadd
• QCA4019: calibration files and board files   Sven Eckelmann
• QCA8994 booting failed   K.Mani
• QCA8994 booting failed   Mohammed Shafi Shajakhan
• QCA8994 booting failed   K.Mani
• QCA9880 3x3 80Mhz low performance   Phyu The
• QCA9880 3x3 80Mhz low performance   Phyu The
• QCA9880 3x3 80Mhz low performance   Phyu The
• QCA9880 3x3 80Mhz low performance   Sebastian Gottschall
• QCA9880 3x3 80Mhz low performance   Ben Greear
• QCA988X firmware pull-push support   Sergey Ryazanov
• QCA988X firmware pull-push support   Sergey Ryazanov
• QCA988X firmware pull-push support   Adrian Chadd
• QCA988X firmware pull-push support   Valo, Kalle
• QCA9984 firmware crash   Sergey Stepanov
• QCA9984 firmware crash   Adrian Chadd
• QCA9984 firmware crash   Sergey Stepanov
• QCA9984 firmware crash   Mohammed Shafi Shajakhan
• QCA9984 firmware crash   Adrian Chadd
• QCA9984 firmware crash   Sergey Stepanov
• QCA9984 firmware crash   Mohammed Shafi Shajakhan
• QCA9984 firmware crash   Adrian Chadd
• Question on QCA9377 and SDIO 3.0   Ann Lo
• Question on QCA9377 and SDIO 3.0   Valo, Kalle
• Recent driver changes destabilized QCA9377 connection quality   Tobias Predel
• Recent driver changes destabilized QCA9377 connection quality   Adrian Chadd
• Recent driver changes destabilized QCA9377 connection quality   Tobias Predel
• Regular firmware crashes with QCA6174   Shaun Crampton
• Regular firmware crashes with QCA6174   Michal Kazior
• Regular firmware crashes with QCA6174   Michal Kazior
• Suspend resume broken since 4.9   Enrico Tagliavini
• Testing email...   Ben Greear
• Very low throughput with QCA9880   Martin Potts
• Very low throughput with QCA9880   Ben Greear
• Very low throughput with QCA9880   Martin Potts
• Very low throughput with QCA9880   Sebastian Gottschall
• Very low throughput with QCA9880   Martin Potts
• Very low throughput with QCA9880   Sebastian Gottschall
• Very low throughput with QCA9880   Martin Potts

Last message date: Tue Jan 31 13:54:43 PST 2017
Archived on: Tue Jan 31 13:55:47 PST 2017

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...