ath10k + OpenWRT + ath10k firmware 10.2.2.60.14 - Crash

[Adrian Chadd]

Hi,

https://wireless.wiki.kernel.org/en/users/Drivers/ath10k/debug should help!



-adrian


On 25 January 2017 at 16:10, Kevin Dious <Kevin.Dious at ubiqomm.com> wrote:
> Adrian,
>
>
>
>
>
> Thanks for the prompt reply.
>
> How exactly do I enable WMI/MAC debugging?  I am a little new to this with ath10k.  Is this the correct way to do it (use the -d flag when running the firmware encoder script)?  Just want to be sure.
>
> kevin at kevin-XPS-8700:~/compex_board_build/qca-swiss-army-knife/tools/scripts/ath10k$ python ath10k-fwencoder -c --otp otp.bin --firmware athwlan.bin --set-fw-api 3 --set-wmi-op-version 10.2 --set-htt-op-version unset -d
> DEBUG: adding id 1 len(value) 4padding_len 0
> DEBUG: adding id 4 len(value) 6869padding_len 3
> DEBUG: adding id 3 len(value) 224758padding_len 2
> DEBUG: adding id 5 len(value) 4padding_len 0
> firmware-3.bin created: 231684 B
> kevin at kevin-XPS-8700:~/compex_board_build/qca-swiss-army-knife/tools/scripts/ath10k$
>
>
> Thank you.
>
> Kevin
>
> From: adrian.chadd at gmail.com <adrian.chadd at gmail.com> on behalf of Adrian Chadd <adrian at freebsd.org>
> Sent: Wednesday, January 25, 2017 4:05:05 PM
> To: Kevin Dious
> Cc: ath10k at lists.infradead.org
> Subject: Re: ath10k + OpenWRT + ath10k firmware 10.2.2.60.14 - Crash
>
> Hiya,
>
> Can you enable WMI/MAC debugging when you load it up? Knowing which
> command(s) it's sent before it does would be helpful.
>
> It'd also be useful to know if it's something silly, like it thinking
> it's a 2G device when QCA9888 is definitely 5G...
>
>
> -a
>