July 2013 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue Jul 2 08:11:07 EDT 2013
Ending: Mon Jul 29 14:07:51 EDT 2013
Messages: 182

• [PATCH 0/3] Initial WoW support   Eugene Krasnikov
  • [PATCH 1/3] Add BMPS support   Eugene Krasnikov
  • [PATCH 2/3] Add WOW support   Eugene Krasnikov
  • [PATCH 3/3] Add missed beacon support   Eugene Krasnikov
  • [PATCH 0/3] Initial WoW support   Eugene Krasnikov
• [PATCH] Handle join failure   Eugene Krasnikov
• [PATCH] Add the debug filesystem framework   dreamfly281 at gmail.com
  • [PATCH] Add the debug filesystem framework   Eugene Krasnikov
    • [PATCH] Add the debug filesystem framework   Eugene Krasnikov
      • [PATCH] Add the debug filesystem framework   YanBo
    • [PATCH] Add the debug filesystem framework   YanBo
• [PATCH] Add the power save control framework and debugfs entry   dreamfly281 at gmail.com
  • [PATCH] Add the power save control framework and debugfs entry   Eugene Krasnikov
    • [PATCH] Add the power save control framework and debugfs entry   YanBo
      • [PATCH] Add the power save control framework and debugfs entry   YanBo
• [PATCH] Add the DUMP command interface which can be used contro the FW action   dreamfly281 at gmail.com
  • [PATCH] Add the DUMP command interface which can be used contro the FW action   Eugene Krasnikov
    • [PATCH] Add the DUMP command interface which can be used contro the FW action   YanBo
      • [PATCH] Add the DUMP command interface which can be used contro the FW action   Eugene Krasnikov
      • [PATCH] Add the DUMP command interface which can be used contro the FW action   YanBo
• [PATCH 0/4] Support encryption in AP mode   Eugene Krasnikov
  • [PATCH 1/4] Handle join failure   Eugene Krasnikov
  • [PATCH 2/4] Do not forget to remove sta in AP mode   Eugene Krasnikov
  • [PATCH 3/4] Do not encrypt EAPOL keys   Eugene Krasnikov
    • [PATCH 3/4] Do not encrypt EAPOL keys   Olof Johansson
      • [PATCH 3/4] Do not encrypt EAPOL keys   Eugene Krasnikov
      • [PATCH] Do not encrypt EAPOL keys   Eugene Krasnikov
  • [PATCH 4/4] Configure correct AID and sta_index in AP mode   Eugene Krasnikov
  • [PATCH 0/4] Support encryption in AP mode   Eugene Krasnikov
• Mint does not boot up with boot.img   Eugene Krasnikov
• [PATCH] Synchronize smd commands   Eugene Krasnikov
  • [PATCH] Synchronize smd commands   Eugene Krasnikov
  • [PATCH] Synchronize smd commands   Olof Johansson
• [PATCH 1/1] Instructions and patch for using backports to build wcn36xx   Olof Johansson
  • [PATCH 1/1] Instructions and patch for using backports to build wcn36xx   Olof Johansson
• [PATCH] Refactor TX path   Eugene Krasnikov
  • [PATCH] Refactor TX path   Eugene Krasnikov
    • [PATCH] Refactor TX path   Olof Johansson
      • [PATCH] Refactor TX path   Eugene Krasnikov
• [PATCH 1/2] Adapt to new beacon/dtim enum semantic   Olof Johansson
• [PATCH 2/2] Update to new wowlan support struct   Olof Johansson
• [PATCH 0/2] Adaptions for new kernel changes   Olof Johansson
  • [PATCH 0/2] Adaptions for new kernel changes   Olof Johansson
• [PATCH 1/5] Add the debug filesystem framework   dreamfly281 at gmail.com
• [PATCH 2/5] Add the power save control framework and debugfs entry   dreamfly281 at gmail.com
• [PATCH 3/5] Add the DUMP command interface which can be used contro the FW action   dreamfly281 at gmail.com
  • [PATCH 3/5] Add the DUMP command interface which can be used contro the FW action   Eugene Krasnikov
    • [PATCH 3/5] Add the DUMP command interface which can be used contro the FW action   YanBo
• [PATCH 4/5] Enable Config the keep alive function   dreamfly281 at gmail.com
  • [PATCH 4/5] Enable Config the keep alive function   Eugene Krasnikov
    • [PATCH 4/5] Enable Config the keep alive function   YanBo
• [PATCH 5/5] Judge the BMPS status before enter BMPS mode   dreamfly281 at gmail.com
• [PATCH v2 1/5] Add the debug filesystem framework   dreamfly281 at gmail.com
  • [PATCH v2 2/5] Add the power save control framework and debugfs entry   dreamfly281 at gmail.com
    • [PATCH v2 2/5] Add the power save control framework and debugfs entry   Olof Johansson
      • [PATCH v2 2/5] Add the power save control framework and debugfs entry   Eugene Krasnikov
      • [PATCH v2 2/5] Add the power save control framework and debugfs entry   Olof Johansson
      • [PATCH v2 2/5] Add the power save control framework and debugfs entry   YanBo
      • [PATCH v2 2/5] Add the power save control framework and debugfs entry   YanBo
  • [PATCH v2 3/5] Add the DUMP command interface which can be used contro the FW action   dreamfly281 at gmail.com
  • [PATCH v2 4/5] Enable Config the keep alive function   dreamfly281 at gmail.com
  • [PATCH v2 5/5] Judge the BMPS status before enter BMPS mode   dreamfly281 at gmail.com
• [PATCH 1/3] Add more power save flags to notice the upper layer the support feature   dreamfly281 at gmail.com
  • [PATCH 2/3] Add the feature capability exchange function   dreamfly281 at gmail.com
    • [PATCH 2/3] Add the feature capability exchange function   Eugene Krasnikov
  • [PATCH 3/3] Use SMSM bus to send data frames   dreamfly281 at gmail.com
    • [PATCH 3/3] Use SMSM bus to send data frames   Eugene Krasnikov
• [PATCH 0/6] Clean up wcn struct by removing or moving variables   Olof Johansson
  • [PATCH 1/6] Remove wcn->iftype variable   Olof Johansson
  • [PATCH 2/6] Use vif address instead of wcn for sta add   Olof Johansson
  • [PATCH 3/6] Remove int ch variable from wcn struct   Olof Johansson
  • [PATCH 4/6] Remove band variable from wcn struct   Olof Johansson
  • [PATCH 5/6] Remove center_freq variable from wcn struct   Olof Johansson
  • [PATCH 6/6] Move is_joining to wcn_sta struct   Olof Johansson
    • [PATCH 6/6] Move is_joining to wcn_sta struct   Eugene Krasnikov
  • [PATCH 0/6] Clean up wcn struct by removing or moving variables   Olof Johansson
  • [PATCH v2 0/6] Clean up wcn struct by removing or moving variables   Olof Johansson
    • [PATCH v2 1/6] Remove wcn->iftype variable   Olof Johansson
    • [PATCH v2 2/6] Use vif address instead of wcn for sta add   Olof Johansson
    • [PATCH v2 3/6] Remove int ch variable from wcn struct   Olof Johansson
    • [PATCH v2 4/6] Remove band variable from wcn struct   Olof Johansson
    • [PATCH v2 5/6] Remove center_freq variable from wcn struct   Olof Johansson
    • [PATCH v2 6/6] Move is_joining to vif struct   Olof Johansson
• [PATCH 1/2] Set correct tx width   Eugene Krasnikov
  • [PATCH 1/2] Set correct tx width   Eugene Krasnikov
• [PATCH 2/2] Configure secondary channel offset   Eugene Krasnikov
• [PATCH 1/2] Remove bool prefix from dump command   Eugene Krasnikov
  • [PATCH 2/2] Declare debug_mask in debugfs   Eugene Krasnikov
    • [PATCH 2/2] Declare debug_mask in debugfs   YanBo
      • [PATCH 2/2] Declare debug_mask in debugfs   Eugene Krasnikov
  • [PATCH 1/2] Remove bool prefix from dump command   Eugene Krasnikov
• [PATCH v2 1/3] Add more power save flags to notice the upper layer the support feature   dreamfly281 at gmail.com
  • [PATCH v2 2/3] Add the feature capability exchange function   dreamfly281 at gmail.com
  • [PATCH v2 3/3] Use SMSM bus to send data frames   dreamfly281 at gmail.com
  • [PATCH v2 1/3] Add more power save flags to notice the upper layer the support feature   Eugene Krasnikov
• [PATCH 1/1] Remove channel parameter from smd_[start|end]_scan   Olof Johansson
• [PATCH 0/3] Preparations for config_bss/sta refactoring   Eugene Krasnikov
  • [PATCH 1/3] Declare all HT capabilities   Eugene Krasnikov
  • [PATCH 2/3] Pass vif instead of iftype   Eugene Krasnikov
  • [PATCH 3/3] Rename sta to sta_params   Eugene Krasnikov
  • [PATCH 0/3] Preparations for config_bss/sta refactoring   Eugene Krasnikov
  • [PATCH 0/3] Preparations for config_bss/sta refactoring   Olof Johansson
    • [PATCH 0/3] Preparations for config_bss/sta refactoring   Eugene Krasnikov
• [PATCH] Remove firmware allocation from wcn struct   Olof Johansson
  • [PATCH] Remove firmware allocation from wcn struct   Olof Johansson
    • [PATCH] Remove firmware allocation from wcn struct   Eugene Krasnikov
      • [PATCH] Remove firmware allocation from wcn struct   Eugene Krasnikov
      • [PATCH] Remove firmware allocation from wcn struct   Olof Johansson
      • [PATCH] Remove firmware allocation from wcn struct   Eugene Krasnikov
      • [PATCH] Remove firmware allocation from wcn struct   Olof Johansson
      • [PATCH] Remove firmware allocation from wcn struct   Eugene Krasnikov
• [PATCH 1/2] Do not configure bss in AP mode   Eugene Krasnikov
  • [PATCH 2/2] In AP mode use correct sta_index and dpu_index   Eugene Krasnikov
    • [PATCH 2/2] In AP mode use correct sta_index and dpu_index   Olof Johansson
  • [PATCH 1/2] Do not configure bss in AP mode   Olof Johansson
    • [PATCH 1/2] Do not configure bss in AP mode   Eugene Krasnikov
• [PATCH] Set HT caps in config_sta   Eugene Krasnikov
  • [PATCH] Set HT caps in config_sta   Eugene Krasnikov
  • [PATCH] Set HT caps in config_sta   Olof Johansson
    • [PATCH] Set HT caps in config_sta   Eugene Krasnikov
  • [PATCH] Set HT caps in config_sta   Olof Johansson
    • [PATCH] Set HT caps in config_sta   Eugene Krasnikov
      • [PATCH 1/2] Set HT caps in config_sta   Eugene Krasnikov
• [PATCH] Remove redundant parameters from config_sta   Eugene Krasnikov
  • [PATCH] Remove redundant parameters from config_sta   Eugene Krasnikov
    • [PATCH 2/2] Remove redundant parameters from config_sta   Eugene Krasnikov
• [PATCH 0/4] Rework config_bss   Eugene Krasnikov
  • [PATCH 1/4] Add ieee80211_sta parameter to config_bss   Eugene Krasnikov
  • [PATCH 2/4] Remove redundant beacon_interval parameter   Eugene Krasnikov
  • [PATCH 3/4] Configure secondary channel offset   Eugene Krasnikov
  • [PATCH 4/4] Get beacon_int, ht_operation_mode and hidden_ssid from vif   Eugene Krasnikov
  • [PATCH 0/4] Rework config_bss   Eugene Krasnikov
• [PATCH] Back off if ring buffer is full   Eugene Krasnikov
  • [PATCH] Back off if ring buffer is full   Eugene Krasnikov
• [PATCH 0/3] Rework config_bss   Eugene Krasnikov
  • [PATCH 1/3] Set correct tx_channel_width_set in config_bss   Eugene Krasnikov
  • [PATCH 3/3] Set correct listen_interval   Eugene Krasnikov
• [PATCH 2/3] Do not send FEATURE_CAPS_EXCHANGE to old FW   Eugene Krasnikov
• [PATCH 0/3] Keep on reworking config_bss   Eugene Krasnikov
  • [PATCH 2/3] Add wcn struct to wcn36xx_smd_set_sta_params   Eugene Krasnikov
  • [PATCH 3/3] Call wcn36xx_smd_set_sta_params even if sta is NULL   Eugene Krasnikov
  • [PATCH 0/3] Keep on reworking config_bss   Eugene Krasnikov
• [PATCH 1/3] Dump RX BD structure for each packet   Eugene Krasnikov
• [PATCH 0/4] Set bss HT params   Eugene Krasnikov
  • [PATCH 1/4] Move remained sta_params to wcn36xx_smd_set_sta_params   Eugene Krasnikov
  • [PATCH 2/4] Change network type dynamically   Eugene Krasnikov
  • [PATCH 3/4] Set short_preamble_supported   Eugene Krasnikov
  • [PATCH 4/4] Implement wcn36xx_smd_set_bss_ht_params   Eugene Krasnikov
  • [PATCH 0/4] Set bss HT params   Eugene Krasnikov
• [PATCH 0/3] Fix TX stall while improving config_bss   Eugene Krasnikov
  • [PATCH 3/3] Fix TX stall in case ring is completely full   Eugene Krasnikov
  • [PATCH 0/3] Fix TX stall while improving config_bss   Eugene Krasnikov
• [PATCH 1/3] Set correct wcn36xx_hal_persona   Eugene Krasnikov
• [PATCH 2/3] Store bss_id returned from config_bss command   Eugene Krasnikov
• [PATCH 0/3] Add initial AMPDU implementation   Eugene Krasnikov
  • [PATCH 1/3] Implement AMPDU   Eugene Krasnikov
  • [PATCH 2/3] Set correct TID for data packets   Eugene Krasnikov
  • [PATCH 3/3] Enable DXE channel after received RX frame   Eugene Krasnikov
  • [PATCH 0/3] Add initial AMPDU implementation   Eugene Krasnikov
• [RFC] Add the BMPS timer to enter/exit BMPS mode when running   dreamfly281 at gmail.com
  • [RFC] Add the BMPS timer to enter/exit BMPS mode when running   Olof Johansson
    • [RFC] Add the BMPS timer to enter/exit BMPS mode when running   Eugene Krasnikov
      • [RFC] Add the BMPS timer to enter/exit BMPS mode when running   Olof Johansson
      • [RFC] Add the BMPS timer to enter/exit BMPS mode when running   YanBo
      • [RFC] Add the BMPS timer to enter/exit BMPS mode when running   Olof Johansson
      • [RFC] Add the BMPS timer to enter/exit BMPS mode when running   Eugene Krasnikov
      • [RFC] Add the BMPS timer to enter/exit BMPS mode when running   YanBo
      • [RFC] Add the BMPS timer to enter/exit BMPS mode when running   Eugene Krasnikov
      • [RFC] Add the BMPS timer to enter/exit BMPS mode when running   Eugene Krasnikov
      • [RFC] Add the BMPS timer to enter/exit BMPS mode when running   Eugene Krasnikov
      • [RFC] Add the BMPS timer to enter/exit BMPS mode when running   Eugene Krasnikov
      • [RFC] Add the BMPS timer to enter/exit BMPS mode when running   YanBo
      • [RFC] Add the BMPS timer to enter/exit BMPS mode when running   Eugene Krasnikov
• [PATCH 0/2] Rework sta_index   Eugene Krasnikov
  • [PATCH 1/2] Rename wcn_sta to wcn36xx_sta   Eugene Krasnikov
  • [PATCH 2/2] Move sta_index to wcn36xx_sta struct   Eugene Krasnikov
• [PATCH 0/4] Add STA lost notification and fix warnings   Eugene Krasnikov
  • [PATCH 1/4] Reset bss_index on AP start   Eugene Krasnikov
  • [PATCH 2/4] In AP mode notify upper layers whet sta was lost   Eugene Krasnikov
  • [PATCH 3/4] Fix checkpatch warnings   Eugene Krasnikov
  • [PATCH 4/4] Fix checkpatch warnings in DXE and HAL   Eugene Krasnikov
  • [PATCH 0/4] Add STA lost notification and fix warnings   Eugene Krasnikov

Last message date: Mon Jul 29 14:07:51 EDT 2013
Archived on: Mon Jul 29 14:08:14 EDT 2013

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...