February 2016 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Feb 1 04:32:49 PST 2016
Ending: Mon Feb 29 21:52:46 PST 2016
Messages: 345

• [RFC PATCH 0/21] Totally remove SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk   Adrian Hunter
  • [RFC PATCH 0/21] Totally remove SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk   Ulf Hansson
• [PATCH v2 0/2] usb: dwc2: Fix regressions on bcm2835   John Youn
  • [PATCH v2 0/2] usb: dwc2: Fix regressions on bcm2835   Felipe Balbi
• [PATCH V4 1/7] clk: bcm2835: the minimum clock divider is 2   Eric Anholt
  • [PATCH V4 1/7] clk: bcm2835: the minimum clock divider is 2   Eric Anholt
    • [PATCH V4 1/7] clk: bcm2835: the minimum clock divider is 2   Martin Sperl
  • [PATCH V4 1/7] clk: bcm2835: the minimum clock divider is 2   Martin Sperl
    • [PATCH V4 1/7] clk: bcm2835: the minimum clock divider is 2   Eric Anholt
• [PATCH V4 2/7] clk: bcm2835: clamp clock divider to highest integer only   Eric Anholt
  • [PATCH V4 2/7] clk: bcm2835: clamp clock divider to highest integer only   Martin Sperl
• [PATCH V4 5/7] clk: bcm2835: add missing 22 HW-clocks.   Eric Anholt
  • [PATCH V4 5/7] clk: bcm2835: add missing 22 HW-clocks.   Martin Sperl
    • [PATCH V4 5/7] clk: bcm2835: add missing 22 HW-clocks.   Martin Sperl
      • [PATCH V4 5/7] clk: bcm2835: add missing 22 HW-clocks.   Stefan Wahren
• [PATCH v6 18/22] usb: dwc2: host: Schedule periodic right away if it's time   Kever Yang
  • [PATCH v6 18/22] usb: dwc2: host: Schedule periodic right away if it's time   Doug Anderson
  • [PATCH v6 18/22] usb: dwc2: host: Schedule periodic right away if it's time   Doug Anderson
• [PATCH v6 20/22] usb: dwc2: host: Properly set even/odd frame   Kever Yang
  • [PATCH v6 20/22] usb: dwc2: host: Properly set even/odd frame   Doug Anderson
    • [PATCH v6 20/22] usb: dwc2: host: Properly set even/odd frame   Kever Yang
• [PATCH] cpufreq: Add Broadcom BCM2835 CPU frequency control driver   Eric Anholt
• [PATCH v6 0/22] usb: dwc2: host: Fix and speed up all the stuff, especially with splits   John Youn
  • [PATCH v6 0/22] usb: dwc2: host: Fix and speed up all the stuff, especially with splits   Doug Anderson
    • [PATCH v6 0/22] usb: dwc2: host: Fix and speed up all the stuff, especially with splits   John Youn
• [PATCH] clk: bcm2835: Add PWM clock support to the device tree   Eric Anholt
• [PATCH V3 1/4] ARM: bcm2835: follow dt uart node-naming convention   Eric Anholt
• [PATCH] ARM: bcm2835: dt: Add Raspberry Pi Model A   Eric Anholt
• [PATCH 0/2] Set the Raspberry Pi Ethernet MAC address   Lubomir Rintel
  • [PATCH 1/2] net/smscx5xx: use the device tree for mac address   Lubomir Rintel
    • [PATCH 1/2] net/smscx5xx: use the device tree for mac address   Arnd Bergmann
      • [PATCH 1/2] net/smscx5xx: use the device tree for mac address   Lubomir Rintel
  • [PATCH 2/2] ARM: bcm2835: dt: Add the ethernet to the device tree   Lubomir Rintel
    • [PATCH 2/2] ARM: bcm2835: dt: Add the ethernet to the device tree   Lubomir Rintel
    • [PATCH 2/2] ARM: bcm2835: dt: Add the ethernet to the device tree   Stephen Warren
      • [PATCH 2/2] ARM: bcm2835: dt: Add the ethernet to the device tree   Lubomir Rintel
    • [PATCH 2/2] ARM: bcm2835: dt: Add the ethernet to the device tree   Olivier Blin
      • [PATCH 2/2] ARM: bcm2835: dt: Add the ethernet to the device tree   Peter Chen
      • [PATCH 2/2] ARM: bcm2835: dt: Add the ethernet to the device tree   Lubomir Rintel
    • [PATCH 2/2] ARM: bcm2835: dt: Add the ethernet to the device tree   kbuild test robot
• [PATCH v6 17/22] usb: dwc2: host: Manage frame nums better in scheduler   Doug Anderson
  • [PATCH v6 17/22] usb: dwc2: host: Manage frame nums better in scheduler   Herrero, Gregory
• [PATCH v2 0/2] Set the Raspberry Pi Ethernet MAC address   Lubomir Rintel
  • [PATCH v2 1/2] ARM: bcm2835: dt: Add the ethernet to the device trees   Lubomir Rintel
    • [PATCH v2 1/2] ARM: bcm2835: dt: Add the ethernet to the device trees   Peter Chen
    • [PATCH v2 1/2] ARM: bcm2835: dt: Add the ethernet to the device trees   Olivier Blin
      • [PATCH v2 1/2] ARM: bcm2835: dt: Add the ethernet to the device trees   Lubomir Rintel
      • [PATCH v2 1/2] ARM: bcm2835: dt: Add the ethernet to the device trees   Olivier Blin
    • [PATCH v2 1/2] ARM: bcm2835: dt: Add the ethernet to the device trees   Stephen Warren
  • [PATCH 2/2] net/smscx5xx: use the device tree for mac address   Lubomir Rintel
    • [PATCH 2/2] net/smscx5xx: use the device tree for mac address   Arnd Bergmann
• [PATCH] ARM: bcm2835: dt: Add Raspberry Pi Zero   Lubomir Rintel
  • [PATCH] ARM: bcm2835: dt: Add Raspberry Pi Zero   Noralf Trønnes
  • [PATCH] ARM: bcm2835: dt: Add Raspberry Pi Zero   Stefan Wahren
    • [PATCH] ARM: bcm2835: dt: Add Raspberry Pi Zero   Eric Anholt
• [PATCH v4 00/13] mmc: use sdhci_pltfm_init for private allocation and clean up   Ulf Hansson
  • [PATCH v4 00/13] mmc: use sdhci_pltfm_init for private allocation and clean up   Adrian Hunter
    • [PATCH v4 00/13] mmc: use sdhci_pltfm_init for private allocation and clean up   Jisheng Zhang
• [PATCH] irqchip: bcm2836: Drop extra memory barrier in SMP boot.   Eric Anholt
  • [PATCH] irqchip: bcm2836: Drop extra memory barrier in SMP boot.   Jason Cooper
• [PATCH] ARM: multi_v7_defconfig: Enable BCM283x   Daniel Stone
  • [PATCH] ARM: multi_v7_defconfig: Enable BCM283x   Eric Anholt
    • [PATCH] ARM: multi_v7_defconfig: Enable BCM283x   Stephen Warren
      • [PATCH] ARM: multi_v7_defconfig: Enable BCM283x   Stephen Warren
      • [PATCH] ARM: multi_v7_defconfig: Enable BCM283x   Stephen Warren
  • [PATCH] ARM: multi_v7_defconfig: Enable BCM283x   Stephen Warren
  • [PATCH] ARM: multi_v7_defconfig: Enable BCM283x   Eric Anholt
• [PATCH 1/3] ARM: bcm2835_defconfig: rebuild on next-20160205   Stephen Warren
  • [PATCH 1/3] ARM: bcm2835_defconfig: rebuild on next-20160205   Eric Anholt
• [PATCH 2/3] ARM: bcm2835_defconfig: disable DEBUG_LL   Stephen Warren
• [PATCH 3/3] ARM: bcm2835_defconfig: enable ARMv7 support   Stephen Warren
• [PATCH 0/2] ARM: bcm2835_defconfig: Enable RPi power domain driver   Stefan Wahren
  • [PATCH 2/2] ARM: bcm2835_defconfig: Enable RPi power domain driver   Stefan Wahren
  • [PATCH 0/2] ARM: bcm2835_defconfig: Enable RPi power domain driver   Eric Anholt
• [PATCH 1/2] ARM: bcm2835_defconfig: Enable RPi firmware driver   Stefan Wahren
• [PATCH V2 1/3] ASoC: bcm2835: move to use the clock framework   Martin Sperl
  • [PATCH V2 1/3] ASoC: bcm2835: move to use the clock framework   Eric Anholt
    • [PATCH V2 1/3] ASoC: bcm2835: move to use the clock framework   Martin Sperl
• [RFC 2/9] clk: bcm2835: add support for parent selection in DT   Martin Sperl
• [GIT PULL] bcm2835 DT changes for 4.6   Eric Anholt
  • [GIT PULL] bcm2835 DT changes for 4.6   Martin Sperl
    • [GIT PULL] bcm2835 DT changes for 4.6   Eric Anholt
      • [GIT PULL] bcm2835 DT changes for 4.6   Florian Fainelli
      • [GIT PULL] bcm2835 DT changes for 4.6   Eric Anholt
      • [GIT PULL] bcm2835 DT changes for 4.6   Florian Fainelli
      • [GIT PULL] bcm2835 DT changes for 4.6   Eric Anholt
• serial: bcm2835: add driver for bcm2835-aux-uart   Martin Sperl
• [PATCH] serial: bcm2835: fix unsigned int issue with irq   kernel at martin.sperl.org
• [PATCH 0/4] spi: bcm2835aux: auxiliary spi improvements   stephanolbrich at gmx.de
  • [PATCH 2/4] spi: bcm2835aux: disable tx fifo empty irq   stephanolbrich at gmx.de
    • [PATCH 2/4] spi: bcm2835aux: disable tx fifo empty irq   Eric Anholt
      • [PATCH 2/4] spi: bcm2835aux: disable tx fifo empty irq   Stephan Olbrich
  • [PATCH 4/4] spi: bcm2835aux: fix CPOL/CPHA setting   stephanolbrich at gmx.de
    • [PATCH 4/4] spi: bcm2835aux: fix CPOL/CPHA setting   Stefan Wahren
    • [PATCH 4/4] spi: bcm2835aux: fix CPOL/CPHA setting   Eric Anholt
      • [PATCH 4/4] spi: bcm2835aux: fix CPOL/CPHA setting   Stephan Olbrich
      • [PATCH 4/4] spi: bcm2835aux: fix CPOL/CPHA setting   Eric Anholt
      • [PATCH 4/4] spi: bcm2835aux: fix CPOL/CPHA setting   Martin Sperl
      • [PATCH 4/4] spi: bcm2835aux: fix CPOL/CPHA setting   Stephan Olbrich
      • [PATCH 4/4] spi: bcm2835aux: fix CPOL/CPHA setting   Martin Sperl
      • [PATCH 4/4] spi: bcm2835aux: fix CPOL/CPHA setting   Martin Sperl
• [PATCH 1/4] spi: bcm2835aux: fix bitmask defines   stephanolbrich at gmx.de
  • [PATCH 1/4] spi: bcm2835aux: fix bitmask defines   Stefan Wahren
    • [PATCH 1/4] spi: bcm2835aux: fix bitmask defines   Stephan Olbrich
  • [PATCH 1/4] spi: bcm2835aux: fix bitmask defines   Eric Anholt
• [PATCH 3/4] spi: bcm2835aux: set up spi-mode before asserting cs-gpio   stephanolbrich at gmx.de
  • [PATCH 3/4] spi: bcm2835aux: set up spi-mode before asserting cs-gpio   Eric Anholt
    • [PATCH 3/4] spi: bcm2835aux: set up spi-mode before asserting cs-gpio   Mark Brown
      • [PATCH 3/4] spi: bcm2835aux: set up spi-mode before asserting cs-gpio   Eric Anholt
      • [PATCH 3/4] spi: bcm2835aux: set up spi-mode before asserting cs-gpio   Mark Brown
      • [PATCH 3/4] spi: bcm2835aux: set up spi-mode before asserting cs-gpio   Stephan Olbrich
      • [PATCH 3/4] spi: bcm2835aux: set up spi-mode before asserting cs-gpio   Martin Sperl
      • [PATCH 3/4] spi: bcm2835aux: set up spi-mode before asserting cs-gpio   Mark Brown
  • [PATCH 3/4] spi: bcm2835aux: set up spi-mode before asserting cs-gpio   Martin Sperl
• [PATCH v6 10/22] usb: dwc2: host: Properly set the HFIR   John Youn
• serial: clk: bcm2835: Strange effects when using aux-uart in console   Martin Sperl
  • serial: clk: bcm2835: Strange effects when using aux-uart in console   Stefan Wahren
    • serial: clk: bcm2835: Strange effects when using aux-uart in console   Martin Sperl
  • serial: clk: bcm2835: Strange effects when using aux-uart in console   Martin Sperl
    • serial: clk: bcm2835: Strange effects when using aux-uart in console   Stefan Wahren
      • serial: clk: bcm2835: Strange effects when using aux-uart in console   Martin Sperl
      • serial: clk: bcm2835: Strange effects when using aux-uart in console   Martin Sperl
      • serial: clk: bcm2835: Strange effects when using aux-uart in console   Martin Sperl
      • serial: clk: bcm2835: Strange effects when using aux-uart in console   Stefan Wahren
      • serial: clk: bcm2835: Strange effects when using aux-uart in console   Martin Sperl
      • serial: clk: bcm2835: Strange effects when using aux-uart in console   Michael Turquette
      • serial: clk: bcm2835: Strange effects when using aux-uart in console   Martin Sperl
      • serial: clk: bcm2835: Strange effects when using aux-uart in console   Martin Sperl
      • serial: clk: bcm2835: Strange effects when using aux-uart in console   Stefan Wahren
      • serial: clk: bcm2835: Strange effects when using aux-uart in console   Martin Sperl
      • serial: clk: bcm2835: Strange effects when using aux-uart in console   Stefan Wahren
• [PATCH] ARM: bcm2835: add bcm2835-aux-uart support to DT   kernel at martin.sperl.org
  • [PATCH] ARM: bcm2835: add bcm2835-aux-uart support to DT   Eric Anholt
• [PATCH RFT] spi: bcm2835: Remove unnecessary workaround to call gpio_set_value   Martin Sperl
  • [PATCH RFT] spi: bcm2835: Remove unnecessary workaround to call gpio_set_value   Axel Lin
    • [PATCH RFT] spi: bcm2835: Remove unnecessary workaround to call gpio_set_value   Martin Sperl
• [PATCH v2 2/2] spi: bcm2835aux: fix CPOL/CPHA setting   Stephan Olbrich
• [PATCH v2 0/2] spi: bcm2835aux: auxiliary spi improvements   Eric Anholt
  • [PATCH v2 0/2] spi: bcm2835aux: auxiliary spi improvements   Stephan Olbrich
    • [PATCH v2 1/2] spi: bcm2835aux: set up spi-mode before asserting cs-gpio   Stephan Olbrich
• [PATCH 1/2] clk: bcm2835: Fix setting of PLL divider clock rates   Eric Anholt
  • [PATCH 1/2] clk: bcm2835: Fix setting of PLL divider clock rates   Michael Turquette
• [PATCH 2/2] clk: bcm2835: Reuse CLK_DIVIDER_MAX_AT_ZERO for recalc_rate()   Eric Anholt
  • [PATCH 2/2] clk: bcm2835: Reuse CLK_DIVIDER_MAX_AT_ZERO for recalc_rate()   Michael Turquette
• [PATCH v3 3/8] spi: core: add spi_split_transfers_maxsize   Geert Uytterhoeven
• [PATCH v5 00/13] mmc: use sdhci_pltfm_init for private allocation and clean up   Jisheng Zhang
  • [PATCH v5 01/13] mmc: sdhci-bcm2835: use sdhci_pltfm_init for private allocation   Jisheng Zhang
    • [PATCH v5 01/13] mmc: sdhci-bcm2835: use sdhci_pltfm_init for private allocation   Eric Anholt
  • [PATCH v5 02/13] mmc: sdhci-esdhc-imx: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v5 03/13] mmc: sdhci-msm: factorise sdhci_msm_pdata outisde of sdhci_msm_host   Jisheng Zhang
  • [PATCH v5 04/13] mmc: sdhci-msm: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v5 05/13] mmc: sdhci-of-arasan: fix clk issue in sdhci_arasan_remove()   Jisheng Zhang
  • [PATCH v5 06/13] mmc: sdhci-of-arasan: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v5 07/13] mmc: sdhci-of-at91: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v5 08/13] mmc: sdhci-of-esdhc: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v5 09/13] mmc: sdhci-pxav3: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v5 10/13] mmc: sdhci-st: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v5 11/13] mmc: sdhci-tegra: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v5 12/13] mmc: sdhci-pxav2: remove unnecessary assignment of pltfm_host->priv   Jisheng Zhang
  • [PATCH v5 13/13] mmc: sdhci-pltfm: remove priv variable from sdhci_pltfm_host   Jisheng Zhang
  • [PATCH v5 00/13] mmc: use sdhci_pltfm_init for private allocation and clean up   Ulf Hansson
• [GIT PULL 1/2] bcm2835 changes to defconfigs for 4.6   Eric Anholt
  • [GIT PULL 1/2] bcm2835 changes to defconfigs for 4.6   Florian Fainelli
    • [GIT PULL 1/2] bcm2835 changes to defconfigs for 4.6   Florian Fainelli
  • [GIT PULL 1/2] bcm2835 changes to defconfigs for 4.6   Florian Fainelli
• [GIT PULL 2/2] bcm2835 changes to DT for 4.6   Eric Anholt
  • [GIT PULL 2/2] bcm2835 changes to DT for 4.6   Florian Fainelli
  • [GIT PULL 2/2] bcm2835 changes to DT for 4.6   Florian Fainelli
• [PATCH V2 6/8] dmaengine: bcm2835: move controlblock chain generation into separate method   Eric Anholt
  • [PATCH V2 6/8] dmaengine: bcm2835: move controlblock chain generation into separate method   Martin Sperl
• [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.   Eric Anholt
  • [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.   Martin Sperl
• [PATCH V2 4/8] dmaengine: bcm2835: add additional defines for DMA-registers   Eric Anholt
• [PATCH V2 5/8] dmaengine: bcm2835: move cyclic member from bcm2835_chan into bcm2835_desc   Eric Anholt
• [PATCH V2 7/8] dmaengine: bcm2835: add slave_sg support to bcm2835-dma   Eric Anholt
• [PATCH] i2c: bcm2835: Don't complain on -EPROBE_DEFER from getting our clock   Eric Anholt
  • [PATCH] i2c: bcm2835: Don't complain on -EPROBE_DEFER from getting our clock   Stefan Wahren
• [PATCH 2/5] ARM: bcm2835: Replace alt0/i2s_alt[02] with standard groups.   Eric Anholt
  • [PATCH 2/5] ARM: bcm2835: Replace alt0/i2s_alt[02] with standard groups.   Stephen Warren
• [PATCH 00/50] pinctrl: Add and use devm_ apis for pinctrl_{register, unregister}   Laxman Dewangan
  • [PATCH 01/50] pinctrl: Add devm_ apis for pinctrl_{register, unregister}   Laxman Dewangan
    • [PATCH 01/50] pinctrl: Add devm_ apis for pinctrl_{register, unregister}   Philipp Zabel
  • [PATCH 02/50] pinctrl: Add resource management devm_pinctrl_{register, unregister}   Laxman Dewangan
  • [PATCH 03/50] pinctrl: bcm281xx: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 03/50] pinctrl: bcm281xx: Use devm_pinctrl_register() for pinctrl registration   Ray Jui
  • [PATCH 04/50] pinctrl: bcm2835: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 04/50] pinctrl: bcm2835: Use devm_pinctrl_register() for pinctrl registration   Ray Jui
  • [PATCH 05/50] pinctrl: cygnus-mux: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 05/50] pinctrl: cygnus-mux: Use devm_pinctrl_register() for pinctrl registration   Ray Jui
  • [PATCH 06/50] pinctrl: iproc-gpio: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 06/50] pinctrl: iproc-gpio: Use devm_pinctrl_register() for pinctrl registration   Ray Jui
  • [PATCH 07/50] pinctrl: nsp-gpio: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 07/50] pinctrl: nsp-gpio: Use devm_pinctrl_register() for pinctrl registration   Ray Jui
  • [PATCH 08/50] pinctrl: berlin: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 09/50] pinctrl: imx: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 09/50] pinctrl: imx: Use devm_pinctrl_register() for pinctrl registration   Philipp Zabel
    • [PATCH 09/50] pinctrl: imx: Use devm_pinctrl_register() for pinctrl registration   Shawn Guo
  • [PATCH 10/50] pinctrl: imxl: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 11/50] pinctrl: cherryview: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 12/50] pinctrl: intel: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 13/50] pinctrl: mtk-common: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 13/50] pinctrl: mtk-common: Use devm_pinctrl_register() for pinctrl registration   Matthias Brugger
  • [PATCH 14/50] pinctrl: meson: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 14/50] pinctrl: meson: Use devm_pinctrl_register() for pinctrl registration   Carlo Caione
  • [PATCH 15/50] pinctrl: mvebu: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 15/50] pinctrl: mvebu: Use devm_pinctrl_register() for pinctrl registration   Thomas Petazzoni
  • [PATCH 16/50] pinctrl: nomadic: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 17/50] pinctrl: spmi-gpio: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 18/50] pinctrl: spmi: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 19/50] pinctrl: ssbi-gpi: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 20/50] pinctrl: ssbi-mpp: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 21/50] pinctrl: msm: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 22/50] pinctrl: pxa: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 22/50] pinctrl: pxa: Use devm_pinctrl_register() for pinctrl registration   Robert Jarzmik
  • [PATCH 23/50] pinctrl: exynos5440: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 24/50] pinctrl: samsung: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 25/50] pinctrl: ish-pfc: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 25/50] pinctrl: ish-pfc: Use devm_pinctrl_register() for pinctrl registration   Geert Uytterhoeven
  • [PATCH 26/50] pinctrl: spear: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 26/50] pinctrl: spear: Use devm_pinctrl_register() for pinctrl registration   Viresh Kumar
  • [PATCH 27/50] pinctrl: stm32: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 27/50] pinctrl: stm32: Use devm_pinctrl_register() for pinctrl registration   Maxime Coquelin
  • [PATCH 28/50] pinctrl: ssbi-mpp: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 28/50] pinctrl: ssbi-mpp: Use devm_pinctrl_register() for pinctrl registration   Maxime Ripard
  • [PATCH 29/50] pinctrl: tegra: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 29/50] pinctrl: tegra: Use devm_pinctrl_register() for pinctrl registration   Stephen Warren
  • [PATCH 30/50] pinctrl: tegra-xusb: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 30/50] pinctrl: tegra-xusb: Use devm_pinctrl_register() for pinctrl registration   Stephen Warren
  • [PATCH 31/50] pinctrl: uniphier: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 31/50] pinctrl: uniphier: Use devm_pinctrl_register() for pinctrl registration   Masahiro Yamada
  • [PATCH 32/50] pinctrl: vt8500: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 33/50] pinctrl: adi2: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 34/50] pinctrl: amd: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 35/50] pinctrl: as3722: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 36/50] pinctrl: at91-pio4: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 37/50] pinctrl: at91: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 38/50] pinctrl: digicolor: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 39/50] pinctrl: lantiq: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 39/50] pinctrl: lantiq: Use devm_pinctrl_register() for pinctrl registration   John Crispin
  • [PATCH 40/50] pinctrl: lpc18xx: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 41/50] pinctrl: palmas: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 42/50] pinctrl: pic32: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 43/50] pinctrl: pistachio: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 44/50] pinctrl: rockchip: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 45/50] pinctrl: st: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 45/50] pinctrl: st: Use devm_pinctrl_register() for pinctrl registration   Maxime Coquelin
  • [PATCH 46/50] pinctrl: tb10x: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 47/50] pinctrl: tz1090-pdc: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 48/50] pinctrl: tz1090 Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 49/50] pinctrl: u300: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
  • [PATCH 50/50] pinctrl: zynq: Use devm_pinctrl_register() for pinctrl registration   Laxman Dewangan
    • [PATCH 50/50] pinctrl: zynq: Use devm_pinctrl_register() for pinctrl registration   Sören Brinkmann
  • [PATCH 40/50] pinctrl: lpc18xx: Use devm_pinctrl_register() for pinctrl registration   Joachim Eastwood
  • [PATCH 00/50] pinctrl: Add and use devm_ apis for pinctrl_{register, unregister}   Laxman Dewangan
  • [PATCH 00/50] pinctrl: Add and use devm_ apis for pinctrl_{register, unregister}   Stefan Wahren
  • [PATCH 13/50] pinctrl: mtk-common: Use devm_pinctrl_register() for pinctrl registration   Hongzhou Yang
  • [PATCH 11/50] pinctrl: cherryview: Use devm_pinctrl_register() for pinctrl registration   Heikki Krogerus
  • [PATCH 12/50] pinctrl: intel: Use devm_pinctrl_register() for pinctrl registration   Heikki Krogerus
  • [PATCH 00/50] pinctrl: Add and use devm_ apis for pinctrl_{register, unregister}   Linus Walleij
    • [PATCH 00/50] pinctrl: Add and use devm_ apis for pinctrl_{register, unregister}   Laxman Dewangan
  • [PATCH 42/50] pinctrl: pic32: Use devm_pinctrl_register() for pinctrl registration   Joshua Henderson
• [PATCH 38/50] pinctrl: digicolor: Use devm_pinctrl_register() for pinctrl registration   Baruch Siach
• [PATCH 08/50] pinctrl: berlin: Use devm_pinctrl_register() for pinctrl registration   Antoine Ténart
• [PATCH 17/50] pinctrl: spmi-gpio: Use devm_pinctrl_register() for pinctrl registration   Bjorn Andersson
• [PATCH 18/50] pinctrl: spmi: Use devm_pinctrl_register() for pinctrl registration   Bjorn Andersson
• [PATCH 19/50] pinctrl: ssbi-gpi: Use devm_pinctrl_register() for pinctrl registration   Bjorn Andersson
• [PATCH 20/50] pinctrl: ssbi-mpp: Use devm_pinctrl_register() for pinctrl registration   Bjorn Andersson
• [PATCH 21/50] pinctrl: msm: Use devm_pinctrl_register() for pinctrl registration   Bjorn Andersson
• [PATCH 01/50] pinctrl: Add devm_ apis for pinctrl_{register, unregister}   Bjorn Andersson
• [PATCH 15/50] pinctrl: mvebu: Use devm_pinctrl_register() for pinctrl registration   kbuild test robot
• [PATCH 1/5] ARM: bcm2835: Define standard pinctrl groups in the gpio node.   Eric Anholt
  • [PATCH 1/5] ARM: bcm2835: Define standard pinctrl groups in the gpio node.   Eric Anholt
• [PATCH 4/5] ARM: bcm2835: Add a group for mapping pins 48-53 to sdhost.   Eric Anholt
• [PATCH 5/5] ARM: bcm2835: Move most RPi default pin groups to their devices.   Eric Anholt
• [PATCH] clk: bcm2835: added missing clock register definitions   Stephen Boyd
• [PATCH] Input: raspberrypi-ft5406: Add Raspberry Pi Touchscreen driver   Lubomir Rintel
  • [PATCH] Input: raspberrypi-ft5406: Add Raspberry Pi Touchscreen driver   Eric Anholt
• [PATCH 0/4] bcm2835 SDHOST controller   Eric Anholt
  • [PATCH 2/4] mmc: bcm2835-sdhost: Add new driver for the internal SD controller.   Eric Anholt
  • [PATCH 0/4] bcm2835 SDHOST controller   Martin Sperl
• [PATCH 1/4] dt-bindings: Add binding for brcm,bcm2835-sdhost.   Eric Anholt
• [PATCH 3/4] ARM: bcm2835: Include SDHOST in the device tree.   Eric Anholt
  • [PATCH 3/4] ARM: bcm2835: Include SDHOST in the device tree.   Sergei Shtylyov
• [PATCH 4/4] ARM: bcm2835: Enable SDHOST by default.   Eric Anholt
• [PATCH v5 00/20] add additional clocks and frac/mash support   kernel at martin.sperl.org
  • [PATCH v5 01/20] clk: bcm2835: pll_off should only set CM_PLL_ANARST   kernel at martin.sperl.org
    • [PATCH v5 01/20] clk: bcm2835: pll_off should only set CM_PLL_ANARST   Stefan Wahren
  • [PATCH v5 02/20] clk: bcm2835: clean up coding style issues   kernel at martin.sperl.org
  • [PATCH v5 03/20] clk: bcm2835: add locking to pll*_on/off methods   kernel at martin.sperl.org
    • [PATCH v5 03/20] clk: bcm2835: add locking to pll*_on/off methods   Stefan Wahren
  • [PATCH v5 04/20] clk: bcm2835: remove uart0/1_pclk fixed clocks   kernel at martin.sperl.org
  • [PATCH v5 05/20] clk: bcm2835: enable clocks that have been enabled by firmware   kernel at martin.sperl.org
  • [PATCH v5 06/20] clk: bcm2835: remove use of BCM2835_CLOCK_COUNT in driver   kernel at martin.sperl.org
  • [PATCH v5 07/20] clk: bcm2835: reorganize bcm2835_clock_array assignment   kernel at martin.sperl.org
  • [PATCH v5 08/20] clk: bcm2835: add fractional support   kernel at martin.sperl.org
  • [PATCH v5 09/20] clk: bcm2835: enable management of PCM clock   kernel at martin.sperl.org
  • [PATCH v5 10/20] clk: bcm2835: implement correct clamping for mash clocks   kernel at martin.sperl.org
  • [PATCH v5 11/20] clk: bcm2835: divider value has to be 1 or more   kernel at martin.sperl.org
  • [PATCH v5 12/20] clk: bcm2835: expose raw clock-registers via debugfs   kernel at martin.sperl.org
  • [PATCH v5 13/20] clk: bcm2835: expose current divider, parent and mash via debugfs   kernel at martin.sperl.org
  • [PATCH v5 14/20] clk: bcm2835: added missing PLL clock divider   kernel at martin.sperl.org
  • [PATCH v5 15/20] clk: bcm2835: add additional clocks   kernel at martin.sperl.org
  • [PATCH v5 16/20] clk: bcm2835: add the camera related clocks cam0, cam1 and ccp2   kernel at martin.sperl.org
  • [PATCH v5 17/20] clk: bcm2835: add the dsi clocks   kernel at martin.sperl.org
  • [PATCH v5 18/20] clk: bcm2835: add arm clock   kernel at martin.sperl.org
  • [PATCH v5 19/20] clk: bcm2835: add gates that require PM_DEBUG to be set   kernel at martin.sperl.org
  • [PATCH v5 00/20] add additional clocks and frac/mash support   Stefan Wahren
• RPi 3 support   Eric Anholt
• [PATCH 0/6] clk: bcm2835: fixes clk-bcm2835 driver issues   kernel at martin.sperl.org
  • [PATCH 1/6] clk: bcm2835: pll_off should only set CM_PLL_ANARST   kernel at martin.sperl.org
    • [PATCH 1/6] clk: bcm2835: pll_off should only set CM_PLL_ANARST   Eric Anholt
  • [PATCH 2/6] clk: bcm2835: add locking to pll*_on/off methods   kernel at martin.sperl.org
    • [PATCH 2/6] clk: bcm2835: add locking to pll*_on/off methods   Eric Anholt
  • [PATCH 3/6] clk: bcm2835: enable clocks that have been enabled by firmware   kernel at martin.sperl.org
    • [PATCH 3/6] clk: bcm2835: enable clocks that have been enabled by firmware   Eric Anholt
  • [PATCH 4/6] clk: bcm2835: divider value has to be 1 or more   kernel at martin.sperl.org
    • [PATCH 4/6] clk: bcm2835: divider value has to be 1 or more   Eric Anholt
  • [PATCH 5/6] clk: bcm2835: correctly enable fractional clock support   kernel at martin.sperl.org
    • [PATCH 5/6] clk: bcm2835: correctly enable fractional clock support   Eric Anholt
      • [PATCH 5/6] clk: bcm2835: correctly enable fractional clock support   Martin Sperl
      • [PATCH 5/6] clk: bcm2835: correctly enable fractional clock support   Eric Anholt
      • [PATCH 5/6] clk: bcm2835: correctly enable fractional clock support   Martin Sperl
  • [PATCH 6/6] clk: bcm2835: clean up coding style issues   kernel at martin.sperl.org
    • [PATCH 6/6] clk: bcm2835: clean up coding style issues   Eric Anholt
• [PATCH 0/3] reorganize clock initialization and add PCM clock   kernel at martin.sperl.org
  • [PATCH 1/3] clk: bcm2835: remove use of BCM2835_CLOCK_COUNT in driver   kernel at martin.sperl.org
  • [PATCH 2/3] clk: bcm2835: reorganize bcm2835_clock_array assignment   kernel at martin.sperl.org
  • [PATCH 3/3] clk: bcm2835: enable management of PCM clock   kernel at martin.sperl.org
• [PATCH 0/2] clk: bcm2835 expose current settings and registers   kernel at martin.sperl.org
  • [PATCH 1/2] clk: bcm2835: expose raw clock-registers via debugfs   kernel at martin.sperl.org
    • [PATCH 1/2] clk: bcm2835: expose raw clock-registers via debugfs   Eric Anholt
  • [PATCH 2/2] clk: bcm2835: expose current divider, parent and mash via debugfs   kernel at martin.sperl.org
    • [PATCH 2/2] clk: bcm2835: expose current divider, parent and mash via debugfs   Eric Anholt
      • [PATCH 2/2] clk: bcm2835: expose current divider, parent and mash via debugfs   Martin Sperl
      • [PATCH 2/2] clk: bcm2835: expose current divider, parent and mash via debugfs   Eric Anholt
• [PATCH 0/8] clk: bcm2835: add most missing clocks of bcm2835   kernel at martin.sperl.org
  • [PATCH 1/8] clk: bcm2835: documenentation: add graphiz bcm2835 clock tree   kernel at martin.sperl.org
  • [PATCH 2/8] clk: bcm2835: add missing PLL clock divider   kernel at martin.sperl.org
  • [PATCH 3/8] clk: bcm2835: add missing osc and per clocks   kernel at martin.sperl.org
  • [PATCH 4/8] clk: bcm2835: add the camera related clocks cam0, cam1 and ccp2   kernel at martin.sperl.org
  • [PATCH 5/8] clk: bcm2835: add the dsi clocks   kernel at martin.sperl.org
  • [PATCH 6/8] clk: bcm2835: add arm clock   kernel at martin.sperl.org
  • [PATCH 7/8] clk: bcm2835: add gates that require PM_DEBUG to be set   kernel at martin.sperl.org
  • [PATCH 8/8] clk: bcm2835: add the testdebug clock generators   kernel at martin.sperl.org
• [PATCH] pinctrl-bcm2835: Fix cut-and-paste error in "pull" parsing   Eric Anholt

Last message date: Mon Feb 29 21:52:46 PST 2016
Archived on: Tue Mar 1 01:01:15 PST 2016

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...