[PATCH v2 1/2] ARM: bcm2835: dt: Add the ethernet to the device trees

[Peter Chen]

> 
> The hub and the ethernet in its port 1 are hardwired on the board.
> 
> Compared to the adapters that can be plugged into the USB ports, this one has
> no serial EEPROM to store its MAC. Nevertheless, the Raspberry Pi has the
> MAC address for this adapter in its ROM, accessible from its firmware.
> 
> U-Boot can read out the address and set the local-mac-address property of the
> node with "ethernet" alias. Let's add the node so that U-Boot can do its
> business.
> 
> Model B rev2 and Model B+ entries were verified by me, the hierarchy and
> pid/vid pair for the Version 2 was provided by Olivier Blin. Original Model B is a
> blind short, though very likely correct.
> 
> Signed-off-by: Lubomir Rintel <lkundrak at v3.sk>
> ---
> Changes since v1:
>   - s/@01/@1/ for ethernet and the hub
>   - Corrected the vid/pid pairs for hub and ethernet
>   - Added Model B rev2 and version 2 board changes
>   - Fixed a missing semicolon typo
> 
>  arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 18 ++++++++++++++++++
> arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 18 ++++++++++++++++++
>  arch/arm/boot/dts/bcm2835-rpi-b.dts      | 18 ++++++++++++++++++
>  arch/arm/boot/dts/bcm2836-rpi-2-b.dts    | 18 ++++++++++++++++++
>  arch/arm/boot/dts/bcm283x.dtsi           |  4 +++-
>  5 files changed, 75 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
> b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
> index ef54050..983353f 100644
> --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
> +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
> @@ -6,6 +6,10 @@
>  	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
>  	model = "Raspberry Pi Model B+";
> 
> +	aliases {
> +		ethernet = ðernet;
> +	};
> +
>  	leds {
>  		act {
>  			gpios = <&gpio 47 0>;
> @@ -29,3 +33,17 @@
>  		brcm,function = <BCM2835_FSEL_ALT0>;
>  	};
>  };
> +
> +&usb {
> +	usb1 at 1 {
> +		compatible = "usb0424,9514";
> +		reg = <01>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethernet: usbether at 1 {
> +			compatible = "usb0424,ec00";
> +			reg = <01>;

According to binding-doc [1], the value of reg should be
" lower case hexadecimal with leading zeroes suppressed", I have
updated it at linux binding-doc in my patch.

Besides, you may have a dtsi for common parts for board and its derived
board, in that case, you only need to change one file next time, surely,
it is not related to this patch.

[1] http://www.firmware.org/1275/bindings/usb/usb-1_0.ps

Peter

> +		};
> +	};
> +};
> diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
> b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
> index 86f1f2f..4b695a0 100644
> --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
> +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
> @@ -6,6 +6,10 @@
>  	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
>  	model = "Raspberry Pi Model B rev2";
> 
> +	aliases {
> +		ethernet = ðernet;
> +	};
> +
>  	leds {
>  		act {
>  			gpios = <&gpio 16 1>;
> @@ -22,3 +26,17 @@
>  		brcm,function = <BCM2835_FSEL_ALT2>;
>  	};
>  };
> +
> +&usb {
> +	usb1 at 1 {
> +		compatible = "usb0424,9512";
> +		reg = <01>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethernet: usbether at 1 {
> +			compatible = "usb0424,ec00";
> +			reg = <01>;
> +		};
> +	};
> +};
> diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts
> b/arch/arm/boot/dts/bcm2835-rpi-b.dts
> index 4859e9d..749648e 100644
> --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
> +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
> @@ -6,6 +6,10 @@
>  	compatible = "raspberrypi,model-b", "brcm,bcm2835";
>  	model = "Raspberry Pi Model B";
> 
> +	aliases {
> +		ethernet = ðernet;
> +	};
> +
>  	leds {
>  		act {
>  			gpios = <&gpio 16 1>;
> @@ -16,3 +20,17 @@
>  &gpio {
>  	pinctrl-0 = <&gpioout &alt0 &alt3>;
>  };
> +
> +&usb {
> +	usb1 at 1 {
> +		compatible = "usb0424,9512";
> +		reg = <01>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethernet: usbether at 1 {
> +			compatible = "usb0424,ec00";
> +			reg = <01>;
> +		};
> +	};
> +};
> diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
> b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
> index ff94666..2bc1a96 100644
> --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
> +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
> @@ -10,6 +10,10 @@
>  		reg = <0 0x40000000>;
>  	};
> 
> +	aliases {
> +		ethernet = ðernet;
> +	};
> +
>  	leds {
>  		act {
>  			gpios = <&gpio 47 0>;
> @@ -33,3 +37,17 @@
>  		brcm,function = <BCM2835_FSEL_ALT0>;
>  	};
>  };
> +
> +&usb {
> +	usb1 at 1 {
> +		compatible = "usb0424,9514";
> +		reg = <01>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethernet: usbether at 1 {
> +			compatible = "usb0424,ec00";
> +			reg = <01>;
> +		};
> +	};
> +};
> diff --git a/arch/arm/boot/dts/bcm283x.dtsi
> b/arch/arm/boot/dts/bcm283x.dtsi index 971e741..bc5fde1 100644
> --- a/arch/arm/boot/dts/bcm283x.dtsi
> +++ b/arch/arm/boot/dts/bcm283x.dtsi
> @@ -187,10 +187,12 @@
>  			status = "disabled";
>  		};
> 
> -		usb at 7e980000 {
> +		usb: usb at 7e980000 {
>  			compatible = "brcm,bcm2835-usb";
>  			reg = <0x7e980000 0x10000>;
>  			interrupts = <1 9>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
>  		};
>  	};
> 
> --
> 2.5.0