[PATCH] ARM: multi_v7_defconfig: Enable BCM283x

[Daniel Stone]

Enable the BCM2835/BCM2836 options required to boot Raspberry Pi.

Signed-off-by: Daniel Stone <daniels at collabora.com>
Cc: Eric Anholt <eric at anholt.net>
Cc: Stephen Warren <swarren at wwwdotorg.org>
Cc: Lee Jones <lee at kernel.org>
Cc: Olof Johansson <olof at lixom.net>
---
 arch/arm/configs/multi_v7_defconfig | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 69d6a6d..e942462 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -33,6 +33,7 @@ CONFIG_ARCH_BCM_NSP=y
 CONFIG_ARCH_BCM_21664=y
 CONFIG_ARCH_BCM_281XX=y
 CONFIG_ARCH_BCM_5301X=y
+CONFIG_ARCH_BCM2835=y
 CONFIG_ARCH_BRCMSTB=y
 CONFIG_ARCH_BERLIN=y
 CONFIG_MACH_BERLIN_BG2=y
@@ -318,6 +319,7 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=m
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
 CONFIG_I2C_AT91=m
+CONFIG_I2C_BCM2835=y
 CONFIG_I2C_CADENCE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_I2C_DIGICOLOR=m
@@ -341,6 +343,8 @@ CONFIG_I2C_RCAR=y
 CONFIG_I2C_CROS_EC_TUNNEL=m
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=m
+CONFIG_SPI_BCM2835=y
+CONFIG_SPI_BCM2835AUX=y
 CONFIG_SPI_CADENCE=y
 CONFIG_SPI_DAVINCI=y
 CONFIG_SPI_FSL_DSPI=m
@@ -363,6 +367,7 @@ CONFIG_SPI_SPIDEV=y
 CONFIG_SPMI=y
 CONFIG_PINCTRL_AS3722=y
 CONFIG_PINCTRL_PALMAS=y
+CONFIG_PINCTRL_BCM2835=y
 CONFIG_PINCTRL_APQ8064=y
 CONFIG_PINCTRL_APQ8084=y
 CONFIG_PINCTRL_IPQ8064=y
@@ -527,6 +532,7 @@ CONFIG_DRM_RCAR_LVDS=y
 CONFIG_DRM_TEGRA=y
 CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_VC4=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_FB_WM8505=y
 CONFIG_FB_SH_MOBILE_LCDC=y
@@ -622,6 +628,7 @@ CONFIG_MMC_SDHCI_SPEAR=y
 CONFIG_MMC_SDHCI_S3C=y
 CONFIG_MMC_SDHCI_S3C_DMA=y
 CONFIG_MMC_SDHCI_BCM_KONA=y
+CONFIG_MMC_SDHCI_BCM2835=y
 CONFIG_MMC_SDHCI_ST=y
 CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
@@ -704,6 +711,7 @@ CONFIG_PL330_DMA=y
 CONFIG_IMX_SDMA=y
 CONFIG_IMX_DMA=y
 CONFIG_MXS_DMA=y
+CONFIG_DMA_BCM2835=y
 CONFIG_DMA_OMAP=y
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_XILINX_VDMA=y
@@ -752,6 +760,7 @@ CONFIG_BERLIN2_ADC=m
 CONFIG_EXYNOS_ADC=m
 CONFIG_XILINX_XADC=y
 CONFIG_AK8975=y
+CONFIG_RASPBERRYPI_POWER=y
 CONFIG_PWM=y
 CONFIG_PWM_ATMEL=m
 CONFIG_PWM_ATMEL_TCB=m
@@ -764,6 +773,7 @@ CONFIG_PWM_TEGRA=y
 CONFIG_PWM_VT8500=y
 CONFIG_PHY_HIX5HD2_SATA=y
 CONFIG_PWM_STI=m
+CONFIG_PWM_BCM2835=y
 CONFIG_OMAP_USB2=y
 CONFIG_TI_PIPE3=y
 CONFIG_PHY_BERLIN_USB=y
@@ -780,6 +790,8 @@ CONFIG_PHY_SUN9I_USB=y
 CONFIG_PHY_SAMSUNG_USB2=m
 CONFIG_NVMEM=y
 CONFIG_NVMEM_SUNXI_SID=y
+CONFIG_BCM2835_MBOX=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_EXT4_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_MSDOS_FS=y
-- 
2.5.0