August 2025 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Fri Aug 1 00:30:28 PDT 2025
Ending: Sun Aug 31 22:59:22 PDT 2025
Messages: 907

• [PATCH v2 02/13] dt-bindings: phy: Add binding for QCS615 standalone QMP DP PHY   Dmitry Baryshkov
• [PATCH v2 02/13] dt-bindings: phy: Add binding for QCS615 standalone QMP DP PHY   Xiangxu Yin
• [PATCH] drivers: phy: cadence: cdns-dphy: Enabling lower resolutions in dphy   Harikrishna Shenoy
• [PATCH v3 0/5] Add Type-C DP support for RK3399 EVB IND board   Dmitry Baryshkov
• [PATCH v2] phy: freescale: imx8qm-hsio: Fix a use of uninitialized mutex   quanyang.wang at windriver.com
• [PATCH 1/2] dt-bindings: phy: add support for NXPs TJA1145 CAN transceiver   Krzysztof Kozlowski
• [PATCH 14/38] dt-bindings: media: mediatek,mt8195-jpeg: Allow range number in node address   AngeloGioacchino Del Regno
• [PATCH 04/38] ASoC: dt-bindings: mt8192-afe-pcm: Fix clocks and clock-names   AngeloGioacchino Del Regno
• [PATCH] phy: ti: gmii-sel: Force RGMII TX delay   Michael Walle
• [PATCH] phy: ti: gmii-sel: Force RGMII TX delay   Matthias Schiffer
• [PATCH] phy: ti: gmii-sel: Force RGMII TX delay   Andrew Lunn
• [PATCH v3 0/5] Add Type-C DP support for RK3399 EVB IND board   Chaoyi Chen
• [PATCH v3 0/5] Add Type-C DP support for RK3399 EVB IND board   Dmitry Baryshkov
• [PATCH v3 0/5] Add Type-C DP support for RK3399 EVB IND board   Chaoyi Chen
• [PATCH v2] phy: exynos5-usbdrd: Remove error print for devm_add_action_or_reset()   Waqar Hameed
• [PATCH v3 0/5] Add Type-C DP support for RK3399 EVB IND board   Dmitry Baryshkov
• [PATCH v3 0/5] Add Type-C DP support for RK3399 EVB IND board   Chaoyi Chen
• [PATCH v5 0/6] initial usbdrd phy support for Exynosautov920 soc   Pritam Manohar Sutar
• [PATCH v5 1/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 HS phy compatible   Pritam Manohar Sutar
• [PATCH v5 2/6] phy: exynos5-usbdrd: support HS phy for ExynosAutov920   Pritam Manohar Sutar
• [PATCH v5 3/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo hsphy   Pritam Manohar Sutar
• [PATCH v5 4/6] phy: exynos5-usbdrd: support HS combo phy for ExynosAutov920   Pritam Manohar Sutar
• [PATCH v5 5/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo ssphy   Pritam Manohar Sutar
• [PATCH v5 6/6] phy: exynos5-usbdrd: support SS combo phy for ExynosAutov920   Pritam Manohar Sutar
• [PATCH v2 00/14] Add HDMI 2.1 FRL support to phy-rockchip-samsung-hdptx   Cristian Ciocaltea
• [PATCH v2 01/14] phy: hdmi: Add HDMI 2.1 FRL configuration options   Cristian Ciocaltea
• [PATCH v2 02/14] phy: rockchip: samsung-hdptx: Fix reported clock rate in high bpc mode   Cristian Ciocaltea
• [PATCH v2 03/14] phy: rockchip: samsung-hdptx: Reduce ROPLL loop bandwidth   Cristian Ciocaltea
• [PATCH v2 04/14] phy: rockchip: samsung-hdptx: Prevent Inter-Pair Skew from exceeding the limits   Cristian Ciocaltea
• [PATCH v2 05/14] phy: rockchip: samsung-hdptx: Use usleep_range() instead of udelay()   Cristian Ciocaltea
• [PATCH v2 06/14] phy: rockchip: samsung-hdptx: Fix coding style alignment   Cristian Ciocaltea
• [PATCH v2 07/14] phy: rockchip: samsung-hdptx: Consistently use [rk_]hdptx_[tmds_] prefixes   Cristian Ciocaltea
• [PATCH v2 08/14] phy: rockchip: samsung-hdptx: Enable lane output in common helper   Cristian Ciocaltea
• [PATCH v2 09/14] phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists   Cristian Ciocaltea
• [PATCH v2 10/14] phy: rockchip: samsung-hdptx: Compute clk rate from PLL config   Cristian Ciocaltea
• [PATCH v2 11/14] phy: rockchip: samsung-hdptx: Drop hw_rate driver data   Cristian Ciocaltea
• [PATCH v2 12/14] phy: rockchip: samsung-hdptx: Switch to driver specific HDMI config   Cristian Ciocaltea
• [PATCH v2 13/14] phy: rockchip: samsung-hdptx: Extend rk_hdptx_phy_verify_hdmi_config() helper   Cristian Ciocaltea
• [PATCH v2 14/14] phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support   Cristian Ciocaltea
• [PATCH 0/2] phy: cdns-dphy: hs-clk improvement and a cleanup   Tomi Valkeinen
• [PATCH 0/5] Add USB2 PHY support for RZ/T2H and RZ/N2H SoCs   Prabhakar
• [PATCH 1/5] dt-bindings: phy: renesas,usb2-phy: Add RZ/T2H and RZ/N2H support   Prabhakar
• [PATCH 2/5] phy: renesas: rcar-gen3-usb2: Store drvdata pointer in channel   Prabhakar
• [PATCH 3/5] phy: renesas: rcar-gen3-usb2: Allow SoC-specific OBINT bits via phy_data   Prabhakar
• [PATCH 4/5] phy: renesas: rcar-gen3-usb2: Add support for RZ/T2H SoC   Prabhakar
• [PATCH 5/5] phy: renesas: rcar-gen3-usb2: Move debug print after register value is updated   Prabhakar
• [PATCH 1/5] dt-bindings: phy: renesas,usb2-phy: Add RZ/T2H and RZ/N2H support   Conor Dooley
• [PATCH v2] phy: freescale: imx8qm-hsio: Fix a use of uninitialized mutex   Frank Li
• [PATCH v3 2/5] phy: rockchip: phy-rockchip-typec: Add typec_mux/typec_switch support   kernel test robot
• [PATCH] drivers: phy: cadence: cdns-dphy: Enabling lower resolutions in dphy   Kumar, Udit
• [PATCH v2] drivers: phy: cadence: cdns-dphy: Enable lower resolutions in dphy   Harikrishna Shenoy
• [PATCH v2] drivers: phy: cadence: cdns-dphy: Enable lower resolutions in dphy   devarsh
• [PATCH 0/2] phy: cdns-dphy: hs-clk improvement and a cleanup   Vinod Koul
• [PATCH v2 0/3] phy: rockchip-snps-pcie3: add support for rockchip,phy-ref-use-pad   Rick Wertenbroek
• [PATCH v2 1/3] dt-bindings: phy: rockchip,pcie3-phy: add optional differential phy clocks   Rick Wertenbroek
• [PATCH v2 2/3] phy: rockchip-snps-pcie3: add support for rockchip,phy-ref-use-pad   Rick Wertenbroek
• [PATCH v2 3/3] dt-bindings: phy: rockchip,pcie3-phy: add rockchip,phy-ref-use-pad   Rick Wertenbroek
• [PATCH v2] phy: ti: gmii-sel: Force RGMII TX delay   Michael Walle
• [PATCH 2/5] phy: renesas: rcar-gen3-usb2: Store drvdata pointer in channel   Neil Armstrong
• [PATCH 3/5] phy: renesas: rcar-gen3-usb2: Allow SoC-specific OBINT bits via phy_data   Neil Armstrong
• [PATCH 4/5] phy: renesas: rcar-gen3-usb2: Add support for RZ/T2H SoC   Neil Armstrong
• [PATCH 5/5] phy: renesas: rcar-gen3-usb2: Move debug print after register value is updated   Neil Armstrong
• [PATCH 00/11] phy: drop unused module aliases   neil.armstrong at linaro.org
• [PATCH 1/3] phy: tegra: xusb: fix device and OF node leak at probe   neil.armstrong at linaro.org
• [PATCH] phy: ti: omap-usb2: enable compile testing   neil.armstrong at linaro.org
• [PATCH] phy: ti: omap-usb2: enable compile testing   neil.armstrong at linaro.org
• [PATCH v2 1/2] phy: add new phy_notify_pmstate() api   Neil Armstrong
• [PATCH 4/5] phy: renesas: rcar-gen3-usb2: Add support for RZ/T2H SoC   Geert Uytterhoeven
• [PATCH V1 0/4] Add support to configure regulator load for UFS QMP PHY   Nitin Rawat
• [PATCH V1 1/4] dt-bindings: phy: Add max-microamp properties for PHY and PLL supplies   Nitin Rawat
• [PATCH V1 2/4] arm64: dts: qcom: sm8750: add max-microamp for UFS PHY and PLL supplies   Nitin Rawat
• [PATCH V1 3/4] arm64: dts: qcom: sm8650: add max-microamp for UFS PHY and PLL supplies   Nitin Rawat
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Nitin Rawat
• [PATCH v3 0/6] arm64: qcom: allow up to 4 lanes for the Type-C DisplayPort Altmode   Konrad Dybcio
• [PATCH 00/11] phy: drop unused module aliases   neil.armstrong at linaro.org
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Konrad Dybcio
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Mark Brown
• [RFC/PATCH 1/2] usb: dwc3: disable for USB_ROLE_NONE   John Keeping
• [PATCH] dt-bindings: phy: marvell,comphy-cp110: Fix clock and child node constraints   Rob Herring (Arm)
• [PATCH 2/5] phy: renesas: rcar-gen3-usb2: Store drvdata pointer in channel   Lad, Prabhakar
• [PATCH 4/5] phy: renesas: rcar-gen3-usb2: Add support for RZ/T2H SoC   Lad, Prabhakar
• [PATCH 4/5] phy: renesas: rcar-gen3-usb2: Add support for RZ/T2H SoC   kernel test robot
• [PATCH v5 1/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 HS phy compatible   Rob Herring
• [PATCH v5 5/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo ssphy   Rob Herring
• [RFC/PATCH 1/2] usb: dwc3: disable for USB_ROLE_NONE   Thinh Nguyen
• [PATCH v3] drivers: phy: cadence: cdns-dphy: Enable lower resolutions in dphy   Harikrishna Shenoy
• [PATCH v5 5/6] phy: rockchip: naneng-combphy: Add RK3528 support   Chukun Pan
• [PATCH 07/11] arm64: dts: rockchip: Add USB nodes for RK3528   Chukun Pan
• [PATCH v5 5/6] phy: rockchip: naneng-combphy: Add RK3528 support   Yao Zi
• [PATCH v2 1/3] dt-bindings: phy: rockchip,pcie3-phy: add optional differential phy clocks   Krzysztof Kozlowski
• [PATCH v2 1/3] dt-bindings: phy: rockchip,pcie3-phy: add optional differential phy clocks   Krzysztof Kozlowski
• [PATCH v2 3/3] dt-bindings: phy: rockchip,pcie3-phy: add rockchip,phy-ref-use-pad   Krzysztof Kozlowski
• [PATCH v2 3/3] dt-bindings: phy: rockchip,pcie3-phy: add rockchip,phy-ref-use-pad   Krzysztof Kozlowski
• [PATCH v2 1/3] dt-bindings: phy: rockchip,pcie3-phy: add optional differential phy clocks   Rick Wertenbroek
• [PATCH] phy: ti: omap-usb2: enable compile testing   neil.armstrong at linaro.org
• [PATCH v3 0/7] SPMI: Implement sub-devices and migrate drivers   neil.armstrong at linaro.org
• [PATCH v3 0/6] arm64: qcom: allow up to 4 lanes for the Type-C DisplayPort Altmode   Neil Armstrong
• [PATCH v2 3/3] dt-bindings: phy: rockchip,pcie3-phy: add rockchip,phy-ref-use-pad   Rick Wertenbroek
• [PATCH v2] phy: ti: gmii-sel: Force RGMII TX delay   Matthias Schiffer
• [PATCH v5 1/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 HS phy compatible   Pritam Manohar Sutar
• [PATCH v5 5/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo ssphy   Pritam Manohar Sutar
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Konrad Dybcio
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Mark Brown
• [PATCH 07/22] dt-bindings: vendor-prefixes: Shenzhen Baijie Technology   Paul Kocialkowski
• [PATCH 01/22] dt-bindings: iommu: sun50i: remove resets from required property   Paul Kocialkowski
• [PATCH 09/22] iommu: sun50i: make reset control optional   Paul Kocialkowski
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Nitin Rawat
• [bug report] phy: usb: Add USB2.0 phy driver for Sunplus SP7021   Dan Carpenter
• [PATCH v4 0/6] arm64: qcom: allow up to 4 lanes for the Type-C DisplayPort Altmode   Konrad Dybcio
• [PATCH v4 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Reference usb-switch.yaml to allow mode-switch   Konrad Dybcio
• [PATCH v4 2/6] phy: qcom: qmp-combo: Rename 'mode' to 'phy_mode'   Konrad Dybcio
• [PATCH v4 3/6] phy: qcom: qmp-combo: store DP phy power state   Konrad Dybcio
• [PATCH v4 4/6] phy: qcom: qmp-combo: introduce QMPPHY_MODE   Konrad Dybcio
• [PATCH v4 5/6] phy: qcom: qmp-combo: register a typec mux to change the QMPPHY_MODE   Konrad Dybcio
• [PATCH v4 6/6] arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13: Set up 4-lane DP   Konrad Dybcio
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Mark Brown
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Nitin Rawat
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Konrad Dybcio
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Mark Brown
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Nitin Rawat
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Nitin Rawat
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Mark Brown
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Mark Brown
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Nitin Rawat
• [PATCH v4 0/6] arm64: qcom: allow up to 4 lanes for the Type-C DisplayPort Altmode   Rob Herring (Arm)
• [PATCH v4 0/8] Add initial USB support for the Renesas RZ/G3S SoC   Claudiu
• [PATCH v4 1/8] soc: renesas: rz-sysc: Add syscon/regmap support   Claudiu
• [PATCH v4 2/8] dt-bindings: phy: renesas,usb2-phy: Mark resets as required for RZ/G3S   Claudiu
• [PATCH v4 3/8] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()   Claudiu
• [PATCH v4 4/8] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support   Claudiu
• [PATCH v4 5/8] reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY   Claudiu
• [PATCH v4 6/8] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC   Claudiu
• [PATCH v4 7/8] arm64: dts: renesas: r9a08g045: Add USB support   Claudiu
• [PATCH v4 8/8] arm64: dts: renesas: rzg3s-smarc: Enable USB support   Claudiu
• [PATCH v2 3/3] dt-bindings: phy: rockchip,pcie3-phy: add rockchip,phy-ref-use-pad   Krzysztof Kozlowski
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Krzysztof Kozlowski
• [PATCH V1 1/4] dt-bindings: phy: Add max-microamp properties for PHY and PLL supplies   Krzysztof Kozlowski
• [PATCH V1 2/4] arm64: dts: qcom: sm8750: add max-microamp for UFS PHY and PLL supplies   Krzysztof Kozlowski
• [PATCH V1 2/4] arm64: dts: qcom: sm8750: add max-microamp for UFS PHY and PLL supplies   Konrad Dybcio
• [PATCH v4 1/8] soc: renesas: rz-sysc: Add syscon/regmap support   Geert Uytterhoeven
• [PATCH V1 2/4] arm64: dts: qcom: sm8750: add max-microamp for UFS PHY and PLL supplies   Krzysztof Kozlowski
• [PATCH v4 1/8] soc: renesas: rz-sysc: Add syscon/regmap support   Claudiu Beznea
• [PATCH] dt-bindings: phy: marvell,comphy-cp110: Fix clock and child node constraints   Miquel Raynal
• [PATCH v4 1/8] soc: renesas: rz-sysc: Add syscon/regmap support   Geert Uytterhoeven
• [PATCH v4 1/8] soc: renesas: rz-sysc: Add syscon/regmap support   Claudiu Beznea
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Manivannan Sadhasivam
• [PATCH V1 2/4] arm64: dts: qcom: sm8750: add max-microamp for UFS PHY and PLL supplies   Nitin Rawat
• [PATCH v2 0/5] Add USB2 PHY support for RZ/T2H and RZ/N2H SoCs   Prabhakar
• [PATCH v2 1/5] dt-bindings: phy: renesas,usb2-phy: Add RZ/T2H and RZ/N2H support   Prabhakar
• [PATCH v2 2/5] phy: renesas: rcar-gen3-usb2: store drvdata pointer in channel   Prabhakar
• [PATCH v2 3/5] phy: renesas: rcar-gen3-usb2: Allow SoC-specific OBINT bits via phy_data   Prabhakar
• [PATCH v2 4/5] phy: renesas: rcar-gen3-usb2: Add support for RZ/T2H SoC   Prabhakar
• [PATCH v2 5/5] phy: renesas: rcar-gen3-usb2: Move debug print after register value is updated   Prabhakar
• [PATCH v2 00/32] media: add imx93 mipi/controller csi support   Frank Li
• [PATCH v2 01/32] dt-bindings: media: add DW MIPI CSI-2 Host support   Frank Li
• [PATCH v2 02/32] media: v4l2-common: Add helper function v4l_get_required_align_by_bpp()   Frank Li
• [PATCH v2 03/32] media: v4l2-common: Add helper function media_bus_fmt_to_csi2_bpp()   Frank Li
• [PATCH v2 04/32] media: v4l2-common: Add helper function media_bus_fmt_to_csi2_dt()   Frank Li
• [PATCH v2 05/32] media: staging: media: imx6-mipi-csi2: replace space with tab for alignment   Frank Li
• [PATCH v2 06/32] media: staging: media: imx6-mipi-csi2: use devm_add_action_or_reset() to simplify code   Frank Li
• [PATCH v2 07/32] media: staging: media: imx6-mipi-csi2: use devm_clk_bulk_get_all() to fetch clocks   Frank Li
• [PATCH v2 08/32] media: staging: media: imx6-mipi-csi2: use devm_mutex_init() to simplify code   Frank Li
• [PATCH v2 09/32] media: staging: media: imx6-mipi-csi2: use guard() to simplify code   Frank Li
• [PATCH v2 10/32] media: staging: media: imx6-mipi-csi2: use register structure to match hardware   Frank Li
• [PATCH v2 11/32] media: staging: media: imx6-mipi-csi2: use devm_platform_ioremap_resource() simplify code   Frank Li
• [PATCH v2 12/32] media: staging: media: imx6-mipi-csi2: move probe part to imx6-csi2.c   Frank Li
• [PATCH v2 13/32] media: staging: media: imx6-mipi-csi2: move sd imx6's specific initialization into imx6-sci2.c   Frank Li
• [PATCH v2 14/32] media: staging: media: imx6-mipi-csi2: move csi2ipu_gasket_init() to imx6-csi2.c   Frank Li
• [PATCH v2 15/32] media: staging: media: imx6-mipi-csi2: move number pad macro define into imx6-csi2.c   Frank Li
• [PATCH v2 16/32] media: staging: media: imx6-mipi-csi2: move dphy init part to imx6-csi2.c   Frank Li
• [PATCH v2 17/32] media: staging: media: imx6-mipi-csi2: use runtime_pm frame to control clks   Frank Li
• [PATCH v2 18/32] media: synopsys: move imx6-mipi-csi2.c to synopsys/mipi-csi2.c   Frank Li
• [PATCH v2 19/32] media: synopsys: csi2: Remove deprecated s_stream and use v4l2_subdev_pad_ops   Frank Li
• [PATCH v2 20/32] media: synopsys: csi2: Add phy interface support   Frank Li
• [PATCH v2 21/32] media: synopsys: csi2: Add basic v150* version register   Frank Li
• [PATCH v2 22/32] media: synopsys: csi2: Add irq support to record error count   Frank Li
• [PATCH v2 23/32] media: synopsys: csi2: Handle alignment requirement for width   Frank Li
• [PATCH v2 24/32] media: synopsys: csi2: Add register prefix to register field definitions   Frank Li
• [PATCH v2 25/32] media: synopsys: csi2: Add need_dphy_reset in config   Frank Li
• [PATCH v2 26/32] media: synopsys: csi2: Add default simple dw_csi2_subdev_init_state   Frank Li
• [PATCH v2 27/32] media: synopsys: csi2: Add v150 lane stop state register bit define   Frank Li
• [PATCH v2 28/32] media: synopsys: csi2: use standard v4l2_subdev_get_fmt() function   Frank Li
• [PATCH v2 29/32] media: synopsys: csi2: Add customize get_frame_desc() callback   Frank Li
• [PATCH v2 30/32] media: synopsys: csi2: Add Image Pixel Interface (IPI) support for v150   Frank Li
• [PATCH v2 31/32] media: synopsys: csi2: Remove source pad connected check at dw_csi2_enable_streams()   Frank Li
• [PATCH v2 32/32] media: synopsys: csi2: Add simple synopsys platform driver   Frank Li
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Dmitry Baryshkov
• [PATCH v4 4/6] phy: qcom: qmp-combo: introduce QMPPHY_MODE   Dmitry Baryshkov
• [PATCH v4 5/6] phy: qcom: qmp-combo: register a typec mux to change the QMPPHY_MODE   Dmitry Baryshkov
• [PATCH 0/4] arm64: dts: qcom: Add PCIe Support for sm8750   Krishna Chaitanya Chundru
• [PATCH 1/4] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the SM8750 QMP PCIe PHY Gen3 x2   Krishna Chaitanya Chundru
• [PATCH 2/4] phy: qcom-qmp-pcie: add dual lane PHY support for SM8750   Krishna Chaitanya Chundru
• [PATCH 3/4] dt-bindings: PCI: qcom,pcie-sm8550: Add SM8750 compatible   Krishna Chaitanya Chundru
• [PATCH 4/4] arm64: dts: qcom: sm8750: Add PCIe PHY and controller node   Krishna Chaitanya Chundru
• [PATCH V1 2/4] arm64: dts: qcom: sm8750: add max-microamp for UFS PHY and PLL supplies   Manivannan Sadhasivam
• [PATCH v2 0/9] phy: convert from clk round_rate() to determine_rate()   Brian Masney
• [PATCH v2 1/9] phy: freescale: phy-fsl-samsung-hdmi: convert from round_rate() to determine_rate()   Brian Masney
• [PATCH v2 2/9] phy: mediatek: phy-mtk-hdmi-mt2701: convert from round_rate() to determine_rate()   Brian Masney
• [PATCH v2 3/9] phy: mediatek: phy-mtk-hdmi-mt8173: convert from round_rate() to determine_rate()   Brian Masney
• [PATCH v2 4/9] phy: mediatek: phy-mtk-hdmi-mt8195: convert from round_rate() to determine_rate()   Brian Masney
• [PATCH v2 5/9] phy: mediatek: phy-mtk-mipi-dsi-mt8173: convert from round_rate() to determine_rate()   Brian Masney
• [PATCH v2 6/9] phy: mediatek: phy-mtk-mipi-dsi-mt8183: convert from round_rate() to determine_rate()   Brian Masney
• [PATCH v2 7/9] phy: rockchip: phy-rockchip-inno-hdmi: convert from round_rate() to determine_rate()   Brian Masney
• [PATCH v2 8/9] phy: rockchip: phy-rockchip-samsung-hdptx: convert from round_rate() to determine_rate()   Brian Masney
• [PATCH v2 9/9] phy: ti: phy-j721e-wiz: convert from round_rate() to determine_rate()   Brian Masney
• [PATCH v10 0/5] pci: qcom: Add QCS8300 PCIe support   Ziyue Zhang
• [PATCH v10 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for qcs8300   Ziyue Zhang
• [PATCH v10 2/5] arm64: dts: qcom: qcs8300: enable pcie0   Ziyue Zhang
• [PATCH v10 3/5] arm64: dts: qcom: qcs8300-ride: enable pcie0 interface   Ziyue Zhang
• [PATCH v10 4/5] arm64: dts: qcom: qcs8300: enable pcie1   Ziyue Zhang
• [PATCH v10 5/5] arm64: dts: qcom: qcs8300-ride: enable pcie1 interface   Ziyue Zhang
• [PATCH v9 0/2] pci: qcom: Add QCS615 PCIe support   Ziyue Zhang
• [PATCH v4 2/6] phy: qcom: qmp-combo: Rename 'mode' to 'phy_mode'   Neil Armstrong
• [PATCH v4 5/6] phy: qcom: qmp-combo: register a typec mux to change the QMPPHY_MODE   Konrad Dybcio
• [PATCH v4 5/6] phy: qcom: qmp-combo: register a typec mux to change the QMPPHY_MODE   Dmitry Baryshkov
• [PATCH 2/4] phy: qcom-qmp-pcie: add dual lane PHY support for SM8750   Dmitry Baryshkov
• [PATCH 4/4] arm64: dts: qcom: sm8750: Add PCIe PHY and controller node   Krzysztof Kozlowski
• [PATCH v4 5/6] phy: qcom: qmp-combo: register a typec mux to change the QMPPHY_MODE   Konrad Dybcio
• [PATCH 4/4] arm64: dts: qcom: sm8750: Add PCIe PHY and controller node   Konrad Dybcio
• [PATCH v2 1/5] dt-bindings: phy: renesas,usb2-phy: Add RZ/T2H and RZ/N2H support   Geert Uytterhoeven
• [PATCH RESEND 0/2] dt-bindings: Drop 'db' suffix duplicating dtschema   Krzysztof Kozlowski
• [PATCH RESEND 1/2] dt-bindings: leds: issi,is31fl319x: Drop 'db' suffix duplicating dtschema   Krzysztof Kozlowski
• [PATCH RESEND 2/2] dt-bindings: phy: fsl,imx8mq-usb: Drop 'db' suffix duplicating dtschema   Krzysztof Kozlowski
• [PATCH RESEND 1/2] dt-bindings: leds: issi,is31fl319x: Drop 'db' suffix duplicating dtschema   Krzysztof Kozlowski
• [PATCH RESEND 2/2] dt-bindings: phy: fsl,imx8mq-usb: Drop 'db' suffix duplicating dtschema   Krzysztof Kozlowski
• [PATCH v2 1/5] dt-bindings: phy: renesas,usb2-phy: Add RZ/T2H and RZ/N2H support   Lad, Prabhakar
• [PATCH v2 1/5] dt-bindings: phy: renesas,usb2-phy: Add RZ/T2H and RZ/N2H support   Geert Uytterhoeven
• [PATCH V1 1/4] dt-bindings: phy: Add max-microamp properties for PHY and PLL supplies   Bjorn Andersson
• [PATCH V1 2/4] arm64: dts: qcom: sm8750: add max-microamp for UFS PHY and PLL supplies   Bjorn Andersson
• [PATCH v3 00/12] Add PCIe support for Tesla FSD SoC   Shradha Todi
• [PATCH v3 01/12] PCI: exynos: Remove unused MACROs in exynos PCIe file   Shradha Todi
• [PATCH v3 02/12] PCI: exynos: Change macro names to exynos specific   Shradha Todi
• [PATCH v3 03/12] PCI: exynos: Reorder MACROs to maintain consistency   Shradha Todi
• [PATCH v3 04/12] PCI: exynos: Add platform device private data   Shradha Todi
• [PATCH v3 05/12] PCI: exynos: Add resource ops, soc variant and device mode   Shradha Todi
• [PATCH v3 06/12] dt-bindings: PCI: Split exynos host into two files   Shradha Todi
• [PATCH v3 07/12] dt-bindings: PCI: Add support for Tesla FSD SoC   Shradha Todi
• [PATCH v3 08/12] dt-bindings: phy: Add PCIe PHY support for FSD SoC   Shradha Todi
• [PATCH v3 09/12] phy: exynos: Add platform device private data   Shradha Todi
• [PATCH v3 10/12] phy: exynos: Add PCIe PHY support for FSD SoC   Shradha Todi
• [PATCH v3 11/12] PCI: exynos: Add support for Tesla FSD SoC   Shradha Todi
• [PATCH v3 12/12] arm64: dts: fsd: Add PCIe support for Tesla FSD SoC   Shradha Todi
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Bjorn Andersson
• [PATCH RESEND 0/2] dt-bindings: Drop 'db' suffix duplicating dtschema   Conor Dooley
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Mark Brown
• [PATCH v9 0/2] pci: qcom: Add QCS615 PCIe support   Bjorn Andersson
• [PATCH v4 0/6] arm64: qcom: allow up to 4 lanes for the Type-C DisplayPort Altmode   Neil Armstrong
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Nitin Rawat
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Nitin Rawat
• [PATCH V1 2/4] arm64: dts: qcom: sm8750: add max-microamp for UFS PHY and PLL supplies   Nitin Rawat
• (subset) [PATCH v2 1/1] arm64: dts: qcom: qcs615: Set LDO12A regulator to HPM to avoid boot hang   Bjorn Andersson
• (subset) [PATCH v1 1/1] arm64: dts: qcom: qcs615: Set LDO12A regulator to HPM to avoid boot hang   Bjorn Andersson
• (subset) [PATCH v7 0/3] pci: qcom: drop unrelated clock and add link_down reset for sa8775p   Bjorn Andersson
• [PATCH] phy: cadence: cdns-dphy-rx: Add runtime PM support   Jai Luthra
• [PATCH 0/2] phy: cdns-dphy: hs-clk improvement and a cleanup   devarsh
• [PATCH v3 06/12] dt-bindings: PCI: Split exynos host into two files   Krzysztof Kozlowski
• [PATCH v3 07/12] dt-bindings: PCI: Add support for Tesla FSD SoC   Krzysztof Kozlowski
• [PATCH v3 12/12] arm64: dts: fsd: Add PCIe support for Tesla FSD SoC   Krzysztof Kozlowski
• [PATCH v10 0/5] pci: qcom: Add QCS8300 PCIe support   Ziyue Zhang
• [PATCH v7 1/3] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings   Ziyue Zhang
• [PATCH v4 0/3] Add Equalization Settings for 8.0 GT/s and Add PCIe Lane Equalization Preset Properties for 8.0 GT/s and 16.0 GT/s   Ziyue Zhang
• [PATCH v10 0/5] pci: qcom: Add QCS8300 PCIe support   Krzysztof Kozlowski
• [PATCH] phy: qualcomm: phy-qcom-eusb2-repeater: fix override properties   Pengyu Luo
• [PATCH] phy: qualcomm: phy-qcom-eusb2-repeater: fix override properties   Konrad Dybcio
• [PATCH] phy: qualcomm: phy-qcom-eusb2-repeater: fix override properties   Luca Weiss
• [PATCH v10 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for qcs8300   Vinod Koul
• [PATCH V1 2/4] arm64: dts: qcom: sm8750: add max-microamp for UFS PHY and PLL supplies   Dmitry Baryshkov
• 回复: [PATCH V1 2/4] arm64: dts: qcom: sm8750: add max-microamp for UFS PHY and PLL supplies   yizhijiao2025 at 163.com
• [PATCH 2/2] phy: qcom-mipi-csi2: Add a CSI2 MIPI D-PHY driver   neil.armstrong at linaro.org
• [PATCH v2 0/2] arm64: dts: qcom: sc7280: Add PCIe0 node   Krishna Chaitanya Chundru
• [PATCH v2 1/2] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document SC7280 PCIe0 phy   Krishna Chaitanya Chundru
• [PATCH v2 2/2] arm64: dts: qcom: sc7280: Add PCIe0 node   Krishna Chaitanya Chundru
• [PATCH v2 2/2] arm64: dts: qcom: sc7280: Add PCIe0 node   Krzysztof Kozlowski
• [PATCH v5 2/6] phy: exynos5-usbdrd: support HS phy for ExynosAutov920   Vinod Koul
• [PATCH v5 4/6] phy: exynos5-usbdrd: support HS combo phy for ExynosAutov920   Vinod Koul
• [PATCH v5 6/6] phy: exynos5-usbdrd: support SS combo phy for ExynosAutov920   Vinod Koul
• [PATCH 2/2] phy: qcom-mipi-csi2: Add a CSI2 MIPI D-PHY driver   Bryan O'Donoghue
• [PATCH 05/11] phy: rockchip: inno-usb2: Add support for RK3528   Vinod Koul
• [PATCH 2/2] phy: qcom-mipi-csi2: Add a CSI2 MIPI D-PHY driver   Neil Armstrong
• [PATCH] phy: qcom: qmp-pcie: Fix PHY initialization when powered down by firmware   Stephan Gerhold
• [PATCH] phy: qualcomm: phy-qcom-eusb2-repeater: fix override properties   Vinod Koul
• [PATCH] dt-bindings: phy: marvell,comphy-cp110: Fix clock and child node constraints   Vinod Koul
• [PATCH 0/3] phy: fix device leaks at unbind   Vinod Koul
• (subset) [PATCH v7 0/3] pci: qcom: drop unrelated clock and add link_down reset for sa8775p   Vinod Koul
• (subset) [PATCH RESEND 0/2] dt-bindings: Drop 'db' suffix duplicating dtschema   Vinod Koul
• [PATCH 0/2] phy: cdns-dphy: hs-clk improvement and a cleanup   Vinod Koul
• [PATCH] phy: cadence: cdns-dphy-rx: Add runtime PM support   Vinod Koul
• [PATCH] phy: ti: omap-usb2: enable compile testing   Vinod Koul
• (subset) [PATCH v5 0/6] Support RK3528 variant of Rockchip naneng-combphy   Vinod Koul
• [PATCH 00/11] phy: drop unused module aliases   Vinod Koul
• [PATCH v2 0/4] Add support for eUSB2 repeater on PMIV0104   Vinod Koul
• [PATCH] phy: rockchip: naneng-combphy: Enable U3 OTG port for RK3568   Vinod Koul
• (subset) [PATCH v5 0/2] Update PCIe PHY settings for QCS8300 and SA8775P   Bjorn Andersson
• [PATCH v10 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for qcs8300   Ziyue Zhang
• [PATCH] phy: qcom: qmp-pcie: Fix PHY initialization when powered down by firmware   Konrad Dybcio
• [PATCH] phy: qcom: qmp-pcie: Fix PHY initialization when powered down by firmware   Stephan Gerhold
• [PATCH] phy: qcom: qmp-pcie: Fix PHY initialization when powered down by firmware   Konrad Dybcio
• [PATCH v3 0/2] Add new phy_notify_state() api   Peter Griffin
• [PATCH v3 1/2] phy: add new phy_notify_state() api   Peter Griffin
• [PATCH v3 2/2] phy: samsung: gs101-ufs: Add .notify_phystate() & hibern8 enter/exit values   Peter Griffin
• [PATCH 00/21] treewide: remove unneeded 'fast_io' parameter in regmap_config   Wolfram Sang
• [PATCH 12/21] phy: remove unneeded 'fast_io' parameter in regmap_config   Wolfram Sang
• [PATCH 0/6] Introduce SpacemiT K1 PCIe phy and host controller   Alex Elder
• [PATCH 1/6] dt-bindings: phy: spacemit: add SpacemiT PCIe/combo PHY   Alex Elder
• [PATCH 2/6] dt-bindings: phy: spacemit: introduce PCIe PHY   Alex Elder
• [PATCH 3/6] dt-bindings: phy: spacemit: introduce PCIe root complex   Alex Elder
• [PATCH 4/6] phy: spacemit: introduce PCIe/combo PHY   Alex Elder
• [PATCH 5/6] PCI: spacemit: introduce SpacemiT PCIe host driver   Alex Elder
• [PATCH 6/6] riscv: dts: spacemit: PCIe and PHY-related updates   Alex Elder
• [PATCH V1 2/4] arm64: dts: qcom: sm8750: add max-microamp for UFS PHY and PLL supplies   Nitin Rawat
• [PATCH 3/6] dt-bindings: phy: spacemit: introduce PCIe root complex   Rob Herring (Arm)
• [PATCH V1 4/4] phy: qcom-qmp-ufs: read max-microamp values from device tree   Nitin Rawat
• [PATCH 3/6] dt-bindings: phy: spacemit: introduce PCIe root complex   Alex Elder
• [PATCH 5/6] PCI: spacemit: introduce SpacemiT PCIe host driver   Bjorn Helgaas
• [PATCH 5/6] PCI: spacemit: introduce SpacemiT PCIe host driver   Alex Elder
• (subset) [PATCH 00/21] treewide: remove unneeded 'fast_io' parameter in regmap_config   Mark Brown
• [PATCH v3 05/12] PCI: exynos: Add resource ops, soc variant and device mode   Bjorn Helgaas
• [PATCH v3 11/12] PCI: exynos: Add support for Tesla FSD SoC   Bjorn Helgaas
• [PATCH v4 4/8] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support   Rob Herring
• [PATCH 4/6] phy: spacemit: introduce PCIe/combo PHY   Inochi Amaoto
• [PATCH 0/3] Describe x1e80100 ufs   Harrison Vanderbyl
• [PATCH 1/3] dt-bindings: describe x1e80100 ufs   Harrison Vanderbyl
• [PATCH 2/3] ufs: ufs-qcom: describe x1e80100 quirks   Harrison Vanderbyl
• [PATCH 3/3] dts: describe x1e80100 ufs   Harrison Vanderbyl
• [PATCH] phy: rockchip: naneng-combphy: Convert comma to semicolon   Chen Ni
• [PATCH 3/3] dts: describe x1e80100 ufs   Bjorn Andersson
• [PATCH 1/6] dt-bindings: phy: spacemit: add SpacemiT PCIe/combo PHY   Yao Zi
• [PATCH] phy: use IS_ERR_OR_NULL() helper in of_phy_put()   Yang Xiuwei
• [PATCH 1/6] dt-bindings: phy: spacemit: add SpacemiT PCIe/combo PHY   Krzysztof Kozlowski
• [PATCH 2/6] dt-bindings: phy: spacemit: introduce PCIe PHY   Krzysztof Kozlowski
• [PATCH 1/3] dt-bindings: describe x1e80100 ufs   Dmitry Baryshkov
• [PATCH 2/3] ufs: ufs-qcom: describe x1e80100 quirks   Dmitry Baryshkov
• [PATCH 3/3] dts: describe x1e80100 ufs   Krzysztof Kozlowski
• [PATCH 2/3] ufs: ufs-qcom: describe x1e80100 quirks   Krzysztof Kozlowski
• [PATCH 3/3] dts: describe x1e80100 ufs   Nitin Rawat
• [PATCH v3 08/12] dt-bindings: phy: Add PCIe PHY support for FSD SoC   Krzysztof Kozlowski
• [PATCH v3 2/2] phy: samsung: gs101-ufs: Add .notify_phystate() & hibern8 enter/exit values   kernel test robot
• [PATCH v2] phy: qcom: qmp-pcie: Fix PHY initialization when powered down by firmware   Stephan Gerhold
• [PATCH 0/3] Describe x1e80100 ufs   Konrad Dybcio
• [PATCH 3/3] dts: describe x1e80100 ufs   Konrad Dybcio
• (subset) [PATCH 00/21] treewide: remove unneeded 'fast_io' parameter in regmap_config   Mark Brown
• [PATCH 3/3] dts: describe x1e80100 ufs   Krzysztof Kozlowski
• [PATCH 3/3] dts: describe x1e80100 ufs   Dmitry Baryshkov
• [PATCH 1/6] dt-bindings: phy: spacemit: add SpacemiT PCIe/combo PHY   Alex Elder
• [PATCH 4/6] phy: spacemit: introduce PCIe/combo PHY   Alex Elder
• [PATCH 1/6] dt-bindings: phy: spacemit: add SpacemiT PCIe/combo PHY   Alex Elder
• [PATCH] phy: mediatek: Modify mipi clk upper bound to 2.5Gbps   payne.lin
• [PATCH] phy: core: Use IS_ERR_OR_NULL() to simplify code   Liao Yuanhong
• [PATCH v5 2/6] phy: exynos5-usbdrd: support HS phy for ExynosAutov920   Pritam Manohar Sutar
• [PATCH 3/3] dts: describe x1e80100 ufs   Bjorn Andersson
• [PATCH v2 1/2] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document SC7280 PCIe0 phy   Bjorn Andersson
• (subset) [PATCH 00/21] treewide: remove unneeded 'fast_io' parameter in regmap_config   Mark Brown
• [PATCH v2 8/9] phy: rockchip: phy-rockchip-samsung-hdptx: convert from round_rate() to determine_rate()   Cristian Ciocaltea
• [PATCH 1/6] dt-bindings: phy: spacemit: add SpacemiT PCIe/combo PHY   Rob Herring
• [PATCH RESEND 1/2] dt-bindings: leds: issi,is31fl319x: Drop 'db' suffix duplicating dtschema   Rob Herring (Arm)
• [PATCH 1/6] dt-bindings: phy: spacemit: add SpacemiT PCIe/combo PHY   Alex Elder
• [PATCH v2] phy: qcom: qmp-pcie: Fix PHY initialization when powered down by firmware   Bjorn Andersson
• [PATCH 4/6] phy: spacemit: introduce PCIe/combo PHY   Inochi Amaoto
• [PATCH v1 1/2] dt-bindings: phy: mtk-tphy: add property for software role switch   Arseniy Velikanov
• [PATCH v1 2/2] phy: mediatek: tphy: Add software role switching   Arseniy Velikanov
• [PATCH 4/6] phy: spacemit: introduce PCIe/combo PHY   Yixun Lan
• [PATCH v1 1/2] dt-bindings: phy: mtk-tphy: add property for software role switch   Rob Herring (Arm)
• [PATCH v1 1/2] dt-bindings: phy: mtk-tphy: add property for software role switch   Krzysztof Kozlowski
• [PATCH v2 02/13] dt-bindings: phy: Add binding for QCS615 standalone QMP DP PHY   Xiangxu Yin
• [PATCH v2 03/13] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: support dual TCSR registers   Xiangxu Yin
• [PATCH v10 0/5] pci: qcom: Add QCS8300 PCIe support   Ziyue Zhang
• [PATCH v10 0/5] pci: qcom: Add QCS8300 PCIe support   Krzysztof Kozlowski
• [PATCH v2] phy: qcom: qmp-pcie: Fix PHY initialization when powered down by firmware   Stephan Gerhold
• [PATCH] phy: mediatek: Modify mipi clk upper bound to 2.5Gbps   CK Hu (胡俊光)
• (subset) [PATCH 00/21] treewide: remove unneeded 'fast_io' parameter in regmap_config   Bjorn Andersson
• [PATCH 0/3] Describe x1e80100 ufs   Rob Herring (Arm)
• [PATCH v2 01/14] phy: hdmi: Add HDMI 2.1 FRL configuration options   Dmitry Baryshkov
• [PATCH 0/7] arm64: allwinner: a523: add USB3.0 support   iuncuim
• [PATCH 1/7] clk: sunxi-ng: a523: add missing usb related clocks   iuncuim
• [PATCH 2/7] arm64: dts: allwinner: a523: add third usb2 phy   iuncuim
• [PATCH 3/7] phy: sun4i-usb: a523: add support for the USB2 PHY   iuncuim
• [PATCH 4/7] phy: allwinner: a523: add USB3/PCIe PHY driver   iuncuim
• [PATCH 5/7] arm64: dts: allwinner: a523: add USB3.0 phy node   iuncuim
• [PATCH 6/7] arm64: dts: allwinner: a523: add DWC3 USB3.0 node   iuncuim
• [PATCH 7/7] arm64: dts: allwinner: a523: activate USB3 for all boards   iuncuim
• [PATCH 1/7] clk: sunxi-ng: a523: add missing usb related clocks   Krzysztof Kozlowski
• [PATCH 2/7] arm64: dts: allwinner: a523: add third usb2 phy   Krzysztof Kozlowski
• [PATCH 5/7] arm64: dts: allwinner: a523: add USB3.0 phy node   Krzysztof Kozlowski
• [PATCH 4/7] phy: allwinner: a523: add USB3/PCIe PHY driver   Krzysztof Kozlowski
• [PATCH 3/7] phy: sun4i-usb: a523: add support for the USB2 PHY   Andre Przywara
• [PATCH 2/7] arm64: dts: allwinner: a523: add third usb2 phy   Andre Przywara
• [PATCH 5/7] arm64: dts: allwinner: a523: add USB3.0 phy node   Andre Przywara
• [PATCH 6/7] arm64: dts: allwinner: a523: add DWC3 USB3.0 node   Andre Przywara
• [PATCH v5 6/6] phy: exynos5-usbdrd: support SS combo phy for ExynosAutov920   Pritam Manohar Sutar
• [PATCH v3 06/12] dt-bindings: PCI: Split exynos host into two files   Shradha Todi
• [PATCH v3 07/12] dt-bindings: PCI: Add support for Tesla FSD SoC   Shradha Todi
• [PATCH v3 12/12] arm64: dts: fsd: Add PCIe support for Tesla FSD SoC   Shradha Todi
• [PATCH v3 05/12] PCI: exynos: Add resource ops, soc variant and device mode   Shradha Todi
• [PATCH v3 11/12] PCI: exynos: Add support for Tesla FSD SoC   Shradha Todi
• [PATCH V2 0/2] Add regulator load support for QMP UFS PHY   Nitin Rawat
• [PATCH V2 1/2] phy: qcom-qmp-ufs: Add regulator load voting for UFS QMP Phy   Nitin Rawat
• [PATCH V2 2/2] phy: qcom-qmp-ufs: Add regulator loads for SM8550 and SM8750   Nitin Rawat
• [PATCH 0/2] phy: cdns-dphy: hs-clk improvement and a cleanup   Devarsh Thakkar
• [PATCH v2 01/32] dt-bindings: media: add DW MIPI CSI-2 Host support   Rob Herring
• [PATCH 1/4] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the SM8750 QMP PCIe PHY Gen3 x2   Rob Herring (Arm)
• [PATCH 3/4] dt-bindings: PCI: qcom,pcie-sm8550: Add SM8750 compatible   Rob Herring (Arm)
• [PATCH 0/7] arm64: allwinner: a523: add USB3.0 support   Rob Herring (Arm)
• [PATCH v3 11/12] PCI: exynos: Add support for Tesla FSD SoC   Bjorn Helgaas
• [PATCH v3 00/14] Add HDMI 2.1 FRL support to phy-rockchip-samsung-hdptx   Cristian Ciocaltea
• [PATCH v3 01/14] phy: hdmi: Add HDMI 2.1 FRL configuration options   Cristian Ciocaltea
• [PATCH v3 02/14] phy: rockchip: samsung-hdptx: Fix reported clock rate in high bpc mode   Cristian Ciocaltea
• [PATCH v3 03/14] phy: rockchip: samsung-hdptx: Reduce ROPLL loop bandwidth   Cristian Ciocaltea
• [PATCH v3 04/14] phy: rockchip: samsung-hdptx: Prevent Inter-Pair Skew from exceeding the limits   Cristian Ciocaltea
• [PATCH v3 05/14] phy: rockchip: samsung-hdptx: Use usleep_range() instead of udelay()   Cristian Ciocaltea
• [PATCH v3 06/14] phy: rockchip: samsung-hdptx: Fix coding style alignment   Cristian Ciocaltea
• [PATCH v3 07/14] phy: rockchip: samsung-hdptx: Consistently use [rk_]hdptx_[tmds_] prefixes   Cristian Ciocaltea
• [PATCH v3 08/14] phy: rockchip: samsung-hdptx: Enable lane output in common helper   Cristian Ciocaltea
• [PATCH v3 09/14] phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists   Cristian Ciocaltea
• [PATCH v3 10/14] phy: rockchip: samsung-hdptx: Compute clk rate from PLL config   Cristian Ciocaltea
• [PATCH v3 11/14] phy: rockchip: samsung-hdptx: Drop hw_rate driver data   Cristian Ciocaltea
• [PATCH v3 12/14] phy: rockchip: samsung-hdptx: Switch to driver specific HDMI config   Cristian Ciocaltea
• [PATCH v3 13/14] phy: rockchip: samsung-hdptx: Extend rk_hdptx_phy_verify_hdmi_config() helper   Cristian Ciocaltea
• [PATCH v3 14/14] phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support   Cristian Ciocaltea
• [PATCH v2 01/14] phy: hdmi: Add HDMI 2.1 FRL configuration options   Cristian Ciocaltea
• [PATCH v2 0/7] phy: rockchip: phy-rockchip-inno-csidphy: add support for rk3588 variant   Michael Riesch via B4 Relay
• [PATCH v2 1/7] dt-bindings: soc: rockchip: add rk3588 csidphy grf syscon   Michael Riesch via B4 Relay
• [PATCH v2 2/7] dt-bindings: phy: rockchip-inno-csi-dphy: make power-domains non-required   Michael Riesch via B4 Relay
• [PATCH v2 3/7] dt-bindings: phy: rockchip-inno-csi-dphy: add rk3588 variant   Michael Riesch via B4 Relay
• [PATCH v2 4/7] phy: rockchip: phy-rockchip-inno-csidphy: allow writes to grf register 0   Michael Riesch via B4 Relay
• [PATCH v2 5/7] phy: rockchip: phy-rockchip-inno-csidphy: allow for different reset lines   Michael Riesch via B4 Relay
• [PATCH v2 6/7] phy: rockchip: phy-rockchip-inno-csidphy: add support for rk3588 variant   Michael Riesch via B4 Relay
• [PATCH v2 7/7] arm64: dts: rockchip: add mipi csi-2 dphy nodes to rk3588   Michael Riesch via B4 Relay
• [PATCH] phy: sun4i-usb: drop num_phys assumption   Andre Przywara
• [PATCH v3 01/14] phy: hdmi: Add HDMI 2.1 FRL configuration options   Dmitry Baryshkov
• [PATCH V2 1/2] phy: qcom-qmp-ufs: Add regulator load voting for UFS QMP Phy   Dmitry Baryshkov
• [PATCH v1 2/2] phy: mediatek: tphy: Add software role switching   kernel test robot
• [PATCH v4 4/8] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support   claudiu beznea
• [PATCH v5 4/6] phy: exynos5-usbdrd: support HS combo phy for ExynosAutov920   Pritam Manohar Sutar
• [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC   Claudiu
• [PATCH v5 1/7] dt-bindings: phy: renesas,usb2-phy: Mark resets as required for RZ/G3S   Claudiu
• [PATCH v5 2/7] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()   Claudiu
• [PATCH v5 3/7] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support   Claudiu
• [PATCH v5 4/7] reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY   Claudiu
• [PATCH v5 5/7] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC   Claudiu
• [PATCH v5 6/7] arm64: dts: renesas: r9a08g045: Add USB support   Claudiu
• [PATCH v5 7/7] arm64: dts: renesas: rzg3s-smarc: Enable USB support   Claudiu
• [PATCH v5 2/7] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()   Biju Das
• [PATCH v5 2/7] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()   claudiu beznea
• [PATCH v5 1/7] dt-bindings: phy: renesas,usb2-phy: Mark resets as required for RZ/G3S   Rob Herring (Arm)
• [PATCH v5 3/7] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support   Rob Herring (Arm)
• [PATCH v3 11/12] PCI: exynos: Add support for Tesla FSD SoC   Krzysztof Kozlowski
• [PATCH v5 2/7] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()   Biju Das
• [PATCH v5 6/6] phy: exynos5-usbdrd: support SS combo phy for ExynosAutov920   Vinod Koul
• [PATCH v3] phy: ti: gmii-sel: Always write the RGMII ID setting   Michael Walle
• [PATCH v5 0/3] Add Equalization Settings for 8.0 GT/s and 32.0 GT/s and Add PCIe Lane Equalization Preset Properties for 8.0 GT/s and 16.0 GT/s   Ziyue Zhang
• [PATCH v5 1/3] PCI: qcom: Add equalization settings for 8.0 GT/s and 32.0 GT/s   Ziyue Zhang
• [PATCH v5 2/3] PCI: qcom: fix macro typo for CURSOR   Ziyue Zhang
• [PATCH v5 3/3] arm64: dts: qcom: lemans: Add PCIe lane equalization preset properties   Ziyue Zhang
• [PATCH] phy: ti: gmii-sel: fix rgmii_id mode config   Aleksandar Gerasimovski
• [PATCH v5 6/6] phy: exynos5-usbdrd: support SS combo phy for ExynosAutov920   Pritam Manohar Sutar
• [PATCH] phy: ti: gmii-sel: fix rgmii_id mode config   s-vadapalli at ti.com
• [PATCH v3] phy: ti: gmii-sel: Always write the RGMII ID setting   Maxime Chevallier
• [PATCH 0/4] PCI: qcom: Add support for Glymur PCIe Gen5x4   Wenbin Yao
• [PATCH 1/4] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the Glymur QMP PCIe PHY   Wenbin Yao
• [PATCH 2/4] dt-bindings: PCI: qcom: Document the Glymur PCIe Controller   Wenbin Yao
• [PATCH 3/4] phy: qcom-qmp: pcs: Add v8.50 register offsets   Wenbin Yao
• [PATCH 4/4] phy: qcom: qmp-pcie: Add support for Glymur PCIe Gen5x4 PHY   Wenbin Yao
• [PATCH v3 11/12] PCI: exynos: Add support for Tesla FSD SoC   Shradha Todi
• [PATCH v3 01/14] phy: hdmi: Add HDMI 2.1 FRL configuration options   Cristian Ciocaltea
• [PATCH v3 11/12] PCI: exynos: Add support for Tesla FSD SoC   Shradha Todi
• [PATCH 1/4] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the Glymur QMP PCIe PHY   Rob Herring (Arm)
• [PATCH 2/4] dt-bindings: PCI: qcom: Document the Glymur PCIe Controller   Rob Herring (Arm)
• [PATCH v5 1/7] dt-bindings: phy: renesas,usb2-phy: Mark resets as required for RZ/G3S   Rob Herring
• [PATCH v2 0/3] ESWIN EIC7700 sata phy driver and yaml,   Yulin Lu
• [PATCH v2 1/3] dt-bindings: ata: eswin: Document for EIC7700 SoC ahci   Yulin Lu
• [PATCH v2 2/3] dt-bindings: phy: eswin: Document for EIC7700 SoC SATA PHY   Yulin Lu
• [PATCH v2 3/3] phy: eswin: Create eswin directory and add EIC7700 SATA PHY driver   Yulin Lu
• [PATCH v2 1/3] dt-bindings: ata: eswin: Document for EIC7700 SoC ahci   Rob Herring
• [PATCH v3 11/12] PCI: exynos: Add support for Tesla FSD SoC   Bjorn Helgaas
• [PATCH 3/4] phy: qcom-qmp: pcs: Add v8.50 register offsets   Dmitry Baryshkov
• [PATCH 4/4] phy: qcom: qmp-pcie: Add support for Glymur PCIe Gen5x4 PHY   Dmitry Baryshkov
• [PATCH 1/4] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the Glymur QMP PCIe PHY   Rob Herring (Arm)
• [PATCH 2/4] dt-bindings: PCI: qcom: Document the Glymur PCIe Controller   Rob Herring (Arm)
• [PATCH V3 0/2] Add regulator load support for QMP UFS PHY   Nitin Rawat
• [PATCH V3 1/2] phy: qcom-qmp-ufs: Add regulator load voting for UFS QMP PHY   Nitin Rawat
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add regulator loads for SM8650 and SM8750   Nitin Rawat
• [PATCH V3 1/2] phy: qcom-qmp-ufs: Add regulator load voting for UFS QMP PHY   Dmitry Baryshkov
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add regulator loads for SM8650 and SM8750   Dmitry Baryshkov
• [PATCH 4/4] phy: qcom: qmp-pcie: Add support for Glymur PCIe Gen5x4 PHY   Wenbin Yao (Consultant)
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add regulator loads for SM8650 and SM8750   Nitin Rawat
• [PATCH v2 2/3] dt-bindings: phy: eswin: Document for EIC7700 SoC SATA PHY   Krzysztof Kozlowski
• [PATCH v2 2/3] dt-bindings: phy: eswin: Document for EIC7700 SoC SATA PHY   Yulin Lu
• [PATCH v3 00/14] Add DisplayPort support for QCS615 platform   Xiangxu Yin
• [PATCH v3 01/14] dt-bindings: display/msm: dp-controller: Add sm6150   Xiangxu Yin
• [PATCH v3 02/14] dt-bindings: phy: Add QMP USB3+DP PHY for QCS615   Xiangxu Yin
• [PATCH v3 03/14] phy: qcom: qmp-usbc: Rename USB-specific ops to prepare for DP support   Xiangxu Yin
• [PATCH v3 04/14] phy: qcom: qmp-usbc: Add USBC PHY type enum   Xiangxu Yin
• [PATCH v3 05/14] phy: qcom: qmp-usbc: Add DP-related fields for USB/DP switchable PHY   Xiangxu Yin
• [PATCH v3 06/14] phy: qcom: qmp-usbc: Add QCS615 DP PHY configuration and init data   Xiangxu Yin
• [PATCH v3 07/14] phy: qcom: qmp-usbc: Move reset and regulator config into PHY cfg   Xiangxu Yin
• [PATCH v3 08/14] phy: qcom: qmp-usbc: Add DP PHY configuration support for QCS615   Xiangxu Yin
• [PATCH v3 09/14] phy: qcom: qmp-usbc: Add DP PHY ops for USB/DP switchable Type-C PHYs   Xiangxu Yin
• [PATCH v3 10/14] phy: qcom: qmp-usbc: Add TCSR parsing and USB/DP mode mutex handling   Xiangxu Yin
• [PATCH v3 11/14] phy: qcom: qmp-usbc: Finalize USB/DP switchable PHY support   Xiangxu Yin
• [PATCH v3 12/14] phy: qcom: qmp-usbc: Add QCS615 DP PHY compatible   Xiangxu Yin
• [PATCH v3 13/14] drm/msm/dp: Add DisplayPort support for sm6150   Xiangxu Yin
• [PATCH v3 14/14] drm/msm/dp: Add support for lane mapping configuration   Xiangxu Yin
• [PATCH v5 1/7] dt-bindings: phy: renesas,usb2-phy: Mark resets as required for RZ/G3S   claudiu beznea
• [PATCH v3 02/14] dt-bindings: phy: Add QMP USB3+DP PHY for QCS615   Dmitry Baryshkov
• [PATCH v3 01/14] dt-bindings: display/msm: dp-controller: Add sm6150   Dmitry Baryshkov
• [PATCH v3 08/14] phy: qcom: qmp-usbc: Add DP PHY configuration support for QCS615   Dmitry Baryshkov
• [PATCH v3 10/14] phy: qcom: qmp-usbc: Add TCSR parsing and USB/DP mode mutex handling   Dmitry Baryshkov
• [PATCH v3 06/14] phy: qcom: qmp-usbc: Add QCS615 DP PHY configuration and init data   Dmitry Baryshkov
• [PATCH v3 07/14] phy: qcom: qmp-usbc: Move reset and regulator config into PHY cfg   Dmitry Baryshkov
• [PATCH v3 04/14] phy: qcom: qmp-usbc: Add USBC PHY type enum   Dmitry Baryshkov
• [PATCH v3 02/14] dt-bindings: phy: Add QMP USB3+DP PHY for QCS615   Dmitry Baryshkov
• [PATCH v3 11/14] phy: qcom: qmp-usbc: Finalize USB/DP switchable PHY support   Dmitry Baryshkov
• [PATCH v3 09/14] phy: qcom: qmp-usbc: Add DP PHY ops for USB/DP switchable Type-C PHYs   Dmitry Baryshkov
• [PATCH v3 03/14] phy: qcom: qmp-usbc: Rename USB-specific ops to prepare for DP support   Dmitry Baryshkov
• [PATCH v3 05/14] phy: qcom: qmp-usbc: Add DP-related fields for USB/DP switchable PHY   Dmitry Baryshkov
• [PATCH v3 14/14] drm/msm/dp: Add support for lane mapping configuration   Dmitry Baryshkov
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add regulator loads for SM8650 and SM8750   Dmitry Baryshkov
• [PATCH v2 00/32] media: add imx93 mipi/controller csi support   Frank Li
• [PATCH v2 3/3] phy: eswin: Create eswin directory and add EIC7700 SATA PHY driver   Vinod Koul
• [PATCH] phy: mediatek: Modify mipi clk upper bound to 2.5Gbps   Vinod Koul
• [PATCH v2 2/9] phy: mediatek: phy-mtk-hdmi-mt2701: convert from round_rate() to determine_rate()   Vinod Koul
• [PATCH v3 1/2] phy: add new phy_notify_state() api   Vinod Koul
• (subset) [PATCH 0/4] arm64: dts: qcom: Add PCIe Support for sm8750   Vinod Koul
• [PATCH] phy: sun4i-usb: drop num_phys assumption   Vinod Koul
• (subset) [PATCH] phy: rockchip: naneng-combphy: Convert comma to semicolon   Vinod Koul
• (subset) [PATCH 00/21] treewide: remove unneeded 'fast_io' parameter in regmap_config   Vinod Koul
• (subset) [PATCH v4 0/6] arm64: qcom: allow up to 4 lanes for the Type-C DisplayPort Altmode   Vinod Koul
• [PATCH v2 0/5] Add USB2 PHY support for RZ/T2H and RZ/N2H SoCs   Vinod Koul
• [PATCH RESEND] dt-bindings: phy: Add eDP PHY compatible for QCS8300   Vinod Koul
• [PATCH] phy: ingenic: use core driver model helper to handle probe errors   Vinod Koul
• [PATCH 00/11] Add RZ/G3E USB3.2 Gen1 Host Controller support   Biju
• [PATCH 03/11] dt-bindings: phy: renesas: Document Renesas RZ/G3E USB3.0 PHY   Biju
• [PATCH 04/11] phy: renesas: Add Renesas RZ/G3E USB3.0 PHY driver   Biju
• [PATCH v2 2/9] phy: mediatek: phy-mtk-hdmi-mt2701: convert from round_rate() to determine_rate()   Brian Masney
• [PATCH v2 04/32] media: v4l2-common: Add helper function media_bus_fmt_to_csi2_dt()   Laurent Pinchart
• [PATCH 03/11] dt-bindings: phy: renesas: Document Renesas RZ/G3E USB3.0 PHY   Conor Dooley
• [PATCH 03/11] dt-bindings: phy: renesas: Document Renesas RZ/G3E USB3.0 PHY   Conor Dooley
• [PATCH 03/11] dt-bindings: phy: renesas: Document Renesas RZ/G3E USB3.0 PHY   Biju Das
• [PATCH v6 0/6] initial usbdrd phy support for Exynosautov920 soc   Pritam Manohar Sutar
• [PATCH v6 1/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 HS phy compatible   Pritam Manohar Sutar
• [PATCH v6 2/6] phy: exynos5-usbdrd: support HS phy for ExynosAutov920   Pritam Manohar Sutar
• [PATCH v6 3/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo hsphy   Pritam Manohar Sutar
• [PATCH v6 4/6] phy: exynos5-usbdrd: support HS combo phy for ExynosAutov920   Pritam Manohar Sutar
• [PATCH v6 5/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo ssphy   Pritam Manohar Sutar
• [PATCH v6 6/6] phy: exynos5-usbdrd: support SS combo phy for ExynosAutov920   Pritam Manohar Sutar
• [PATCH v2 2/3] dt-bindings: phy: eswin: Document for EIC7700 SoC SATA PHY   Krzysztof Kozlowski
• [PATCH v3] phy: qcom: qmp-pcie: Fix PHY initialization when powered down by firmware   Stephan Gerhold
• [PATCH v2 3/3] phy: eswin: Create eswin directory and add EIC7700 SATA PHY driver   kernel test robot
• [PATCH v2 0/4] PCI: qcom: Add support for Glymur PCIe Gen5x4   Wenbin Yao
• [PATCH v2 1/4] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the Glymur QMP PCIe PHY   Wenbin Yao
• [PATCH v2 2/4] dt-bindings: PCI: qcom: Document the Glymur PCIe Controller   Wenbin Yao
• [PATCH v2 3/4] phy: qcom-qmp: pcs: Add v8.50 register offsets   Wenbin Yao
• [PATCH v2 4/4] phy: qcom: qmp-pcie: Add support for Glymur PCIe Gen5x4 PHY   Wenbin Yao
• [PATCH v2 4/4] phy: qcom: qmp-pcie: Add support for Glymur PCIe Gen5x4 PHY   Dmitry Baryshkov
• [PATCH v2 3/4] phy: qcom-qmp: pcs: Add v8.50 register offsets   Dmitry Baryshkov
• [PATCH v3] phy: qcom: qmp-pcie: Fix PHY initialization when powered down by firmware   Dmitry Baryshkov
• [PATCH RFC 0/3] phy: qcom: qmp-combo: set default qmpphy_mode from DT for Thinkpad HDMI support   Neil Armstrong
• [PATCH RFC 1/3] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document default phy mode   Neil Armstrong
• [PATCH RFC 2/3] phy: qcom: qmp-combo: get default qmpphy_mode from DT   Neil Armstrong
• [PATCH RFC 3/3] arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes   Neil Armstrong
• [PATCH RFC 00/22] Apple Silicon USB3 support   Sven Peter
• [PATCH RFC 01/22] dt-bindings: usb: snps,dwc3: Allow multiple iommus   Sven Peter
• [PATCH RFC 02/22] dt-bindings: usb: Add Apple dwc3   Sven Peter
• [PATCH RFC 03/22] dt-bindings: phy: Add Apple Type-C PHY   Sven Peter
• [PATCH RFC 04/22] usb: dwc3: apple: Reset dwc3 during role switches   Sven Peter
• [PATCH RFC 05/22] usb: dwc3: apple: Do not use host-vbus-glitches workaround   Sven Peter
• [PATCH RFC 06/22] usb: dwc3: apple: Use synchronous role switch for apple   Sven Peter
• [PATCH RFC 07/22] usb: dwc3: apple: Adjust vendor-specific registers during init   Sven Peter
• [PATCH RFC 08/22] usb: typec: tipd: Clear interrupts first   Sven Peter
• [PATCH RFC 09/22] usb: typec: tipd: Move initial irq mask to tipd_data   Sven Peter
• [PATCH RFC 10/22] usb: typec: tipd: Move switch_power_state to tipd_data   Sven Peter
• [PATCH RFC 11/22] usb: typec: tipd: Trace data status for CD321x correctly   Sven Peter
• [PATCH RFC 12/22] usb: typec: tipd: Add cd321x struct with separate size   Sven Peter
• [PATCH RFC 13/22] usb: typec: tipd: Read USB4, Thunderbolt and DisplayPort status for cd321x   Sven Peter
• [PATCH RFC 14/22] usb: typec: tipd: Register DisplayPort and Thunderbolt altmodes for cd321x   Sven Peter
• [PATCH RFC 15/22] usb: typec: tipd: Update partner identity when power status was updated   Sven Peter
• [PATCH RFC 16/22] usb: typec: tipd: Use read_power_status function in probe   Sven Peter
• [PATCH RFC 17/22] usb: typec: tipd: Read data status in probe and cache its value   Sven Peter
• [PATCH RFC 18/22] usb: typec: mux: Introduce data_role to mux state   Sven Peter
• [PATCH RFC 19/22] usb: typec: tipd: Handle mode transitions for CD321x   Sven Peter
• [PATCH RFC 20/22] soc: apple: Add hardware tunable support   Sven Peter
• [PATCH RFC 21/22] phy: apple: Add Apple Type-C PHY   Sven Peter
• [PATCH RFC 22/22] arm64: dts: apple: t8103: Add Apple Type-C PHY and dwc3 nodes   Sven Peter
• [PATCH] phy: renesas: rcar-gen3-usb2: Fix ID check logic with VBUS valid   Prabhakar
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add regulator loads for SM8650 and SM8750   Nitin Rawat
• [PATCH RFC 03/22] dt-bindings: phy: Add Apple Type-C PHY   Janne Grunau
• [PATCH RFC 13/22] usb: typec: tipd: Read USB4, Thunderbolt and DisplayPort status for cd321x   Janne Grunau
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add regulator loads for SM8650 and SM8750   Nitin Rawat
• [PATCH v2 1/4] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the Glymur QMP PCIe PHY   Rob Herring (Arm)
• [PATCH v2 2/4] dt-bindings: PCI: qcom: Document the Glymur PCIe Controller   Rob Herring (Arm)
• [PATCH v3 00/31] media: add imx93 mipi/controller csi support   Frank Li
• [PATCH v3 01/31] dt-bindings: media: add DW MIPI CSI-2 Host support   Frank Li
• [PATCH v3 02/31] media: v4l2-common: Add helper function v4l_get_required_align_by_bpp()   Frank Li
• [PATCH v3 03/31] media: v4l2-common: Add helper function media_bus_fmt_to_csi2_(bpp|dt)()   Frank Li
• [PATCH v3 04/31] media: staging: media: imx6-mipi-csi2: replace space with tab for alignment   Frank Li
• [PATCH v3 05/31] media: staging: media: imx6-mipi-csi2: use devm_add_action_or_reset() to simplify code   Frank Li
• [PATCH v3 06/31] media: staging: media: imx6-mipi-csi2: use devm_clk_bulk_get_all() to fetch clocks   Frank Li
• [PATCH v3 07/31] media: staging: media: imx6-mipi-csi2: use devm_mutex_init() to simplify code   Frank Li
• [PATCH v3 08/31] media: staging: media: imx6-mipi-csi2: use guard() to simplify code   Frank Li
• [PATCH v3 09/31] media: staging: media: imx6-mipi-csi2: use register structure to match hardware   Frank Li
• [PATCH v3 10/31] media: staging: media: imx6-mipi-csi2: use devm_platform_ioremap_resource() simplify code   Frank Li
• [PATCH v3 11/31] media: staging: media: imx6-mipi-csi2: move probe part to imx6-csi2.c   Frank Li
• [PATCH v3 12/31] media: staging: media: imx6-mipi-csi2: move sd imx6's specific initialization into imx6-sci2.c   Frank Li
• [PATCH v3 13/31] media: staging: media: imx6-mipi-csi2: move csi2ipu_gasket_init() to imx6-csi2.c   Frank Li
• [PATCH v3 14/31] media: staging: media: imx6-mipi-csi2: move number pad macro define into imx6-csi2.c   Frank Li
• [PATCH v3 15/31] media: staging: media: imx6-mipi-csi2: move dphy init part to imx6-csi2.c   Frank Li
• [PATCH v3 16/31] media: staging: media: imx6-mipi-csi2: use runtime_pm frame to control clks   Frank Li
• [PATCH v3 17/31] media: synopsys: move imx6-mipi-csi2.c to synopsys/mipi-csi2.c   Frank Li
• [PATCH v3 18/31] media: synopsys: csi2: Remove deprecated s_stream and use v4l2_subdev_pad_ops   Frank Li
• [PATCH v3 19/31] media: synopsys: csi2: Add phy interface support   Frank Li
• [PATCH v3 20/31] media: synopsys: csi2: Add basic v150* version register   Frank Li
• [PATCH v3 21/31] media: synopsys: csi2: Add irq support to record error count   Frank Li
• [PATCH v3 22/31] media: synopsys: csi2: Handle alignment requirement for width   Frank Li
• [PATCH v3 23/31] media: synopsys: csi2: Add register prefix to register field definitions   Frank Li
• [PATCH v3 24/31] media: synopsys: csi2: Add need_dphy_reset in config   Frank Li
• [PATCH v3 25/31] media: synopsys: csi2: Add default simple dw_csi2_subdev_init_state   Frank Li
• [PATCH v3 26/31] media: synopsys: csi2: Add v150 lane stop state register bit define   Frank Li
• [PATCH v3 27/31] media: synopsys: csi2: use standard v4l2_subdev_get_fmt() function   Frank Li
• [PATCH v3 28/31] media: synopsys: csi2: Add customize get_frame_desc() callback   Frank Li
• [PATCH v3 29/31] media: synopsys: csi2: Add Image Pixel Interface (IPI) support for v150   Frank Li
• [PATCH v3 30/31] media: synopsys: csi2: Remove source pad connected check at dw_csi2_enable_streams()   Frank Li
• [PATCH v3 31/31] media: synopsys: csi2: Add simple synopsys platform driver   Frank Li
• [PATCH v6 6/6] phy: exynos5-usbdrd: support SS combo phy for ExynosAutov920   kernel test robot
• [PATCH RFC 07/22] usb: dwc3: apple: Adjust vendor-specific registers during init   Thinh Nguyen
• [PATCH RFC 05/22] usb: dwc3: apple: Do not use host-vbus-glitches workaround   Thinh Nguyen
• [PATCH RFC 01/22] dt-bindings: usb: snps,dwc3: Allow multiple iommus   Rob Herring (Arm)
• [PATCH RFC 02/22] dt-bindings: usb: Add Apple dwc3   Rob Herring (Arm)
• [PATCH RFC 03/22] dt-bindings: phy: Add Apple Type-C PHY   Rob Herring (Arm)
• [PATCH RFC 03/22] dt-bindings: phy: Add Apple Type-C PHY   Rob Herring
• [PATCH RFC 04/22] usb: dwc3: apple: Reset dwc3 during role switches   Thinh Nguyen
• [PATCH v3] phy: ti: gmii-sel: Always write the RGMII ID setting   Jakub Kicinski
• [PATCH v2 4/4] phy: qcom: qmp-pcie: Add support for Glymur PCIe Gen5x4 PHY   Wenbin Yao (Consultant)
• [PATCH 0/6] phy: phy-can-transceiver: Support TJA1048/TJA1051   Peng Fan
• [PATCH 1/6] dt-bindings: phy: ti,tcan104x-can: Document NXP TJA1051/1048   Peng Fan
• [PATCH 2/6] phy: phy-can-transceiver: Add support for NXP TJA1051   Peng Fan
• [PATCH 3/6] phy: phy-can-transceiver: Add dual channel support for TJA1048   Peng Fan
• [PATCH 4/6] arm64: dts: imx95-15x15-evk: Use phys to replace xceiver-supply   Peng Fan
• [PATCH 5/6] arm64: dts: imx8mp-evk: Use phys to replace xceiver-supply   Peng Fan
• [PATCH 6/6] arm64: dts: imx93-11x11-evk: Use phys to replace xceiver-supply   Peng Fan
• [PATCH v3 02/14] dt-bindings: phy: Add QMP USB3+DP PHY for QCS615   Xiangxu Yin
• [PATCH v3] phy: ti: gmii-sel: Always write the RGMII ID setting   Michael Walle
• [PATCH v3 02/14] dt-bindings: phy: Add QMP USB3+DP PHY for QCS615   Xiangxu Yin
• [PATCH v3 04/14] phy: qcom: qmp-usbc: Add USBC PHY type enum   Xiangxu Yin
• [PATCH v3 05/14] phy: qcom: qmp-usbc: Add DP-related fields for USB/DP switchable PHY   Xiangxu Yin
• [PATCH 2/6] phy: phy-can-transceiver: Add support for NXP TJA1051   Maud Spierings
• [PATCH v3 06/14] phy: qcom: qmp-usbc: Add QCS615 DP PHY configuration and init data   Xiangxu Yin
• [PATCH RFC 01/22] dt-bindings: usb: snps,dwc3: Allow multiple iommus   Krzysztof Kozlowski
• [PATCH RFC 02/22] dt-bindings: usb: Add Apple dwc3   Krzysztof Kozlowski
• [PATCH v10 3/5] arm64: dts: qcom: qcs8300-ride: enable pcie0 interface   Manivannan Sadhasivam
• [PATCH v5 1/3] PCI: qcom: Add equalization settings for 8.0 GT/s and 32.0 GT/s   Manivannan Sadhasivam
• [PATCH v5 3/3] arm64: dts: qcom: lemans: Add PCIe lane equalization preset properties   neil.armstrong at linaro.org
• [PATCH v3 07/14] phy: qcom: qmp-usbc: Move reset and regulator config into PHY cfg   Xiangxu Yin
• [PATCH V3 1/2] phy: qcom-qmp-ufs: Add regulator load voting for UFS QMP PHY   Manivannan Sadhasivam
• [PATCH v3 08/14] phy: qcom: qmp-usbc: Add DP PHY configuration support for QCS615   Xiangxu Yin
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add regulator loads for SM8650 and SM8750   Manivannan Sadhasivam
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add regulator loads for SM8650 and SM8750   Manivannan Sadhasivam
• [PATCH v3 05/14] phy: qcom: qmp-usbc: Add DP-related fields for USB/DP switchable PHY   Dmitry Baryshkov
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add regulator loads for SM8650 and SM8750   Dmitry Baryshkov
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add regulator loads for SM8650 and SM8750   Dmitry Baryshkov
• [PATCH 0/2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051   Maud Spierings via B4 Relay
• [PATCH 1/2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051   Maud Spierings via B4 Relay
• [PATCH 2/2] arm64: dts: freescale: imx8mp-moduline-display-106: Use phys to replace xceiver-supply   Maud Spierings via B4 Relay
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add regulator loads for SM8650 and SM8750   Nitin Rawat
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add regulator loads for SM8650 and SM8750   Nitin Rawat
• [PATCH v6 6/6] phy: exynos5-usbdrd: support SS combo phy for ExynosAutov920   Pritam Manohar Sutar
• [PATCH v2 2/7] dt-bindings: phy: rockchip-inno-csi-dphy: make power-domains non-required   Krzysztof Kozlowski
• [PATCH v7 0/6] initial usbdrd phy support for Exynosautov920 soc   Pritam Manohar Sutar
• [PATCH v7 1/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 HS phy compatible   Pritam Manohar Sutar
• [PATCH v7 2/6] phy: exynos5-usbdrd: support HS phy for ExynosAutov920   Pritam Manohar Sutar
• [PATCH v7 3/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo hsphy   Pritam Manohar Sutar
• [PATCH v7 4/6] phy: exynos5-usbdrd: support HS combo phy for ExynosAutov920   Pritam Manohar Sutar
• [PATCH v7 5/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo ssphy   Pritam Manohar Sutar
• [PATCH v7 6/6] phy: exynos5-usbdrd: support SS combo phy for ExynosAutov920   Pritam Manohar Sutar
• [PATCH v5 1/3] PCI: qcom: Add equalization settings for 8.0 GT/s and 32.0 GT/s   Qiang Yu
• [PATCH v3 07/14] phy: qcom: qmp-usbc: Move reset and regulator config into PHY cfg   Dmitry Baryshkov
• [PATCH v3 08/14] phy: qcom: qmp-usbc: Add DP PHY configuration support for QCS615   Dmitry Baryshkov
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add regulator loads for SM8650 and SM8750   Manivannan Sadhasivam
• [PATCH RFC 1/3] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document default phy mode   Dmitry Baryshkov
• [PATCH RFC 3/3] arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes   Dmitry Baryshkov
• [PATCH RFC 1/3] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document default phy mode   Neil Armstrong
• [PATCH RFC 3/3] arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes   Neil Armstrong
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add regulator loads for SM8650 and SM8750   Nitin Rawat
• [PATCH RFC 1/3] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document default phy mode   Dmitry Baryshkov
• [PATCH RFC 3/3] arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes   Dmitry Baryshkov
• [PATCH RFC 3/3] arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes   Stephan Gerhold
• [PATCH RFC 3/3] arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes   Dmitry Baryshkov
• [PATCH RFC 3/3] arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes   Stephan Gerhold
• [PATCH v3] phy: ti: gmii-sel: Always write the RGMII ID setting   Jakub Kicinski
• [PATCH v3 02/14] dt-bindings: phy: Add QMP USB3+DP PHY for QCS615   Rob Herring
• (subset) [PATCH v5 0/6] Support RK3528 variant of Rockchip naneng-combphy   Heiko Stuebner
• [PATCH 03/11] dt-bindings: phy: renesas: Document Renesas RZ/G3E USB3.0 PHY   Rob Herring
• [PATCH 1/2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051   Conor Dooley
• [PATCH 1/6] dt-bindings: phy: ti,tcan104x-can: Document NXP TJA1051/1048   Conor Dooley
• [PATCH v3 02/14] dt-bindings: phy: Add QMP USB3+DP PHY for QCS615   Dmitry Baryshkov
• [PATCH v3 01/31] dt-bindings: media: add DW MIPI CSI-2 Host support   Rob Herring (Arm)
• [PATCH v4 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Reference usb-switch.yaml to allow mode-switch   Rob Herring
• [PATCH RFC 1/3] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document default phy mode   Xilin Wu
• [PATCH RFC 07/22] usb: dwc3: apple: Adjust vendor-specific registers during init   Sven Peter
• [PATCH RFC 05/22] usb: dwc3: apple: Do not use host-vbus-glitches workaround   Sven Peter
• [PATCH RFC 1/3] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document default phy mode   Dmitry Baryshkov
• [PATCH v1 1/2] dt-bindings: phy: mtk-tphy: add property for software role switch   Arseniy Velikanov
• [PATCH v1 1/2] dt-bindings: phy: mtk-tphy: add property for software role switch   Krzysztof Kozlowski
• [PATCH RFC 01/22] dt-bindings: usb: snps,dwc3: Allow multiple iommus   Krzysztof Kozlowski
• [PATCH v7 1/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 HS phy compatible   Krzysztof Kozlowski
• [PATCH v7 3/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo hsphy   Krzysztof Kozlowski
• [PATCH v7 5/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo ssphy   Krzysztof Kozlowski
• [PATCH RFC 04/22] usb: dwc3: apple: Reset dwc3 during role switches   Janne Grunau
• [PATCH RFC 04/22] usb: dwc3: apple: Reset dwc3 during role switches   Sven Peter
• [PATCH RFC 02/22] dt-bindings: usb: Add Apple dwc3   Sven Peter
• [PATCH RFC 03/22] dt-bindings: phy: Add Apple Type-C PHY   Sven Peter
• [PATCH 2/6] phy: phy-can-transceiver: Add support for NXP TJA1051   Peng Fan
• [PATCH v2 19/20] clk: sp7021: switch to FIELD_PREP_WM16 macro   Nicolas Frattaroli
• [PATCH 3/3] dts: describe x1e80100 ufs   Manivannan Sadhasivam
• [PATCH v2 1/3] dt-bindings: ata: eswin: Document for EIC7700 SoC ahci   luyulin at eswincomputing.com
• [PATCH v3 00/20] BYEWORD_UPDATE: unifying (most) HIWORD_UPDATE macros   Nicolas Frattaroli
• [PATCH v3 01/20] bitmap: introduce hardware-specific bitfield operations   Nicolas Frattaroli
• [PATCH v3 02/20] mmc: dw_mmc-rockchip: switch to FIELD_PREP_WM16 macro   Nicolas Frattaroli
• [PATCH v3 03/20] soc: rockchip: grf: switch to FIELD_PREP_WM16_CONST macro   Nicolas Frattaroli
• [PATCH v3 04/20] media: synopsys: hdmirx: replace macros with bitfield variants   Nicolas Frattaroli
• [PATCH v3 05/20] drm/rockchip: lvds: switch to FIELD_PREP_WM16 macro   Nicolas Frattaroli
• [PATCH v3 06/20] phy: rockchip-emmc: switch to FIELD_PREP_WM16 macro   Nicolas Frattaroli
• [PATCH v3 07/20] drm/rockchip: dsi: switch to FIELD_PREP_WM16* macros   Nicolas Frattaroli
• [PATCH v3 08/20] drm/rockchip: vop2: switch to FIELD_PREP_WM16 macro   Nicolas Frattaroli
• [PATCH v3 09/20] phy: rockchip-samsung-dcphy: switch to FIELD_PREP_WM16 macro   Nicolas Frattaroli
• [PATCH v3 10/20] drm/rockchip: dw_hdmi_qp: switch to FIELD_PREP_WM16 macro   Nicolas Frattaroli
• [PATCH v3 11/20] drm/rockchip: inno-hdmi: switch to FIELD_PREP_WM16 macro   Nicolas Frattaroli
• [PATCH v3 12/20] phy: rockchip-usb: switch to FIELD_PREP_WM16 macro   Nicolas Frattaroli
• [PATCH v3 13/20] drm/rockchip: dw_hdmi: switch to FIELD_PREP_WM16* macros   Nicolas Frattaroli
• [PATCH v3 14/20] ASoC: rockchip: i2s-tdm: switch to FIELD_PREP_WM16_CONST macro   Nicolas Frattaroli
• [PATCH v3 15/20] net: stmmac: dwmac-rk: switch to FIELD_PREP_WM16 macro   Nicolas Frattaroli
• [PATCH v3 16/20] PCI: rockchip: Switch to FIELD_PREP_WM16* macros   Nicolas Frattaroli
• [PATCH v3 17/20] PCI: dw-rockchip: Switch to FIELD_PREP_WM16 macro   Nicolas Frattaroli
• [PATCH v3 18/20] PM / devfreq: rockchip-dfi: switch to FIELD_PREP_WM16 macro   Nicolas Frattaroli
• [PATCH v3 19/20] clk: sp7021: switch to FIELD_PREP_WM16 macro   Nicolas Frattaroli
• [PATCH v3 20/20] phy: rockchip-pcie: switch to FIELD_PREP_WM16 macro   Nicolas Frattaroli
• [PATCH v2 0/5] phy: phy-can-transceiver: Support TJA1048/TJA1051   Peng Fan
• [PATCH v2 1/5] dt-bindings: phy: ti,tcan104x-can: Document NXP TJA1051/1048   Peng Fan
• [PATCH v2 2/5] phy: phy-can-transceiver: Add dual channel support for TJA1048   Peng Fan
• [PATCH v2 3/5] arm64: dts: imx95-15x15-evk: Use phys to replace xceiver-supply   Peng Fan
• [PATCH v2 4/5] arm64: dts: imx8mp-evk: Use phys to replace xceiver-supply   Peng Fan
• [PATCH v2 5/5] arm64: dts: imx93-11x11-evk: Use phys to replace xceiver-supply   Peng Fan
• [PATCH 4/7] phy: allwinner: a523: add USB3/PCIe PHY driver   Philipp Zabel
• [PATCH 0/3] Fix the NULL pointer deference issue in QMP USB drivers   Kathiravan Thirumoorthy
• [PATCH 1/3] phy: qcom-qmp-usb: fix NULL pointer dereference in PM callbacks   Kathiravan Thirumoorthy
• [PATCH 2/3] phy: qcom-qmp-usb-legacy: fix NULL pointer dereference in PM callbacks   Kathiravan Thirumoorthy
• [PATCH 3/3] phy: qcom-qmp-usbc: fix NULL pointer dereference in PM callbacks   Kathiravan Thirumoorthy
• [PATCH v2 1/5] dt-bindings: phy: ti,tcan104x-can: Document NXP TJA1051/1048   Frank Li
• [PATCH 5/7] arm64: dts: allwinner: a523: add USB3.0 phy node   Chen-Yu Tsai
• [PATCH v2 2/5] phy: phy-can-transceiver: Add dual channel support for TJA1048   Frank Li
• [PATCH v2 3/5] arm64: dts: imx95-15x15-evk: Use phys to replace xceiver-supply   Frank Li
• [PATCH v2 4/5] arm64: dts: imx8mp-evk: Use phys to replace xceiver-supply   Frank Li
• [PATCH v2 5/5] arm64: dts: imx93-11x11-evk: Use phys to replace xceiver-supply   Frank Li
• [PATCH v3 01/20] bitmap: introduce hardware-specific bitfield operations   Jakub Kicinski
• [PATCH v3 15/20] net: stmmac: dwmac-rk: switch to FIELD_PREP_WM16 macro   Jakub Kicinski
• [PATCH v2 3/7] dt-bindings: phy: rockchip-inno-csi-dphy: add rk3588 variant   Rob Herring
• [PATCH v2 3/5] arm64: dts: imx95-15x15-evk: Use phys to replace xceiver-supply   Sherry Sun
• [PATCH v2 3/5] arm64: dts: imx95-15x15-evk: Use phys to replace xceiver-supply   Bough Chen
• [PATCH 1/3] phy: qcom-qmp-usb: fix NULL pointer dereference in PM callbacks   Bjorn Andersson
• [PATCH v2 2/3] dt-bindings: phy: eswin: Document for EIC7700 SoC SATA PHY   luyulin at eswincomputing.com
• [PATCH v2 0/3] arm64: dts: qcom: Add PCIe Support for sm8750   Krishna Chaitanya Chundru
• [PATCH v2 1/3] dt-bindings: PCI: qcom,pcie-sm8550: Add SM8750 compatible   Krishna Chaitanya Chundru
• [PATCH v2 2/3] arm64: dts: qcom: sm8750: Add PCIe PHY and controller node   Krishna Chaitanya Chundru
• [PATCH v2 3/3] PCI: qcom: Restrict port parsing only to pci child nodes   Krishna Chaitanya Chundru
• [PATCH v3 0/4] PCI: qcom: Add support for Glymur PCIe Gen5x4   Wenbin Yao
• [PATCH v3 1/4] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the Glymur QMP PCIe PHY   Wenbin Yao
• [PATCH v3 2/4] dt-bindings: PCI: qcom: Document the Glymur PCIe Controller   Wenbin Yao
• [PATCH v3 3/4] phy: qcom-qmp: pcs: Add v8.50 register offsets   Wenbin Yao
• [PATCH v3 4/4] phy: qcom: qmp-pcie: Add support for Glymur PCIe Gen5x4 PHY   Wenbin Yao
• [PATCH v2 3/3] PCI: qcom: Restrict port parsing only to pci child nodes   Manivannan Sadhasivam
• [PATCH v3 4/4] phy: qcom: qmp-pcie: Add support for Glymur PCIe Gen5x4 PHY   Manivannan Sadhasivam
• [PATCH v2 3/3] PCI: qcom: Restrict port parsing only to pci child nodes   Krishna Chaitanya Chundru
• [PATCH v7 5/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo ssphy   Pritam Manohar Sutar
• [PATCH v2 3/3] PCI: qcom: Restrict port parsing only to pci child nodes   Krzysztof Kozlowski
• [PATCH v2 3/3] PCI: qcom: Restrict port parsing only to pci child nodes   Krzysztof Kozlowski
• [PATCH v2 3/3] PCI: qcom: Restrict port parsing only to pci child nodes   Krzysztof Kozlowski
• [PATCH v7 5/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo ssphy   Krzysztof Kozlowski
• [PATCH 1/3] phy: qcom-qmp-usb: fix NULL pointer dereference in PM callbacks   Kathiravan Thirumoorthy
• [PATCH v2 3/3] PCI: qcom: Restrict port parsing only to pci child nodes   Krishna Chaitanya Chundru
• [PATCH v11 0/5] pci: qcom: Add QCS8300 PCIe support   Ziyue Zhang
• [PATCH v11 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for qcs8300   Ziyue Zhang
• [PATCH v11 2/5] arm64: dts: qcom: qcs8300: enable pcie0   Ziyue Zhang
• [PATCH v11 3/5] arm64: dts: qcom: qcs8300-ride: enable pcie0 interface   Ziyue Zhang
• [PATCH v11 4/5] arm64: dts: qcom: qcs8300: enable pcie1   Ziyue Zhang
• [PATCH v11 5/5] arm64: dts: qcom: qcs8300-ride: enable pcie1 interface   Ziyue Zhang
• [PATCH v2 3/3] PCI: qcom: Restrict port parsing only to pci child nodes   Manivannan Sadhasivam
• [PATCH v2 3/3] PCI: qcom: Restrict port parsing only to pci child nodes   Manivannan Sadhasivam
• [PATCH v2 3/3] PCI: qcom: Restrict port parsing only to pci child nodes   Krzysztof Kozlowski
• [PATCH v2 3/3] PCI: qcom: Restrict port parsing only to pci child nodes   Manivannan Sadhasivam
• [PATCH] phy: qcom: m31-eusb2: Fix the error log while enabling clock   Prashanth K
• [PATCH v3 0/3] arm64: dts: qcom: Add PCIe Support for sm8750   Krishna Chaitanya Chundru
• [PATCH v3 1/3] dt-bindings: PCI: qcom,pcie-sm8550: Add SM8750 compatible   Krishna Chaitanya Chundru
• [PATCH v3 2/3] arm64: dts: qcom: sm8750: Add PCIe PHY and controller node   Krishna Chaitanya Chundru
• [PATCH v3 3/3] PCI: qcom: Restrict port parsing only to pci child nodes   Krishna Chaitanya Chundru
• [PATCH v3 0/3] arm64: dts: qcom: Add PCIe Support for sm8750   Rob Herring (Arm)
• [PATCH] phy: lynx-28g: check return value when calling lynx_28g_pll_get   Josua Mayer
• [PATCH v3 04/20] media: synopsys: hdmirx: replace macros with bitfield variants   Dmitry Osipenko
• [PATCH v3 00/20] BYEWORD_UPDATE: unifying (most) HIWORD_UPDATE macros   Yury Norov
• [PATCH v3 4/4] phy: qcom: qmp-pcie: Add support for Glymur PCIe Gen5x4 PHY   Dmitry Baryshkov
• [PATCH 4/7] phy: allwinner: a523: add USB3/PCIe PHY driver   Chukun Pan
• [PATCH v3 01/20] bitmap: introduce hardware-specific bitfield operations   Heiko Stuebner
• [PATCH v3 02/20] mmc: dw_mmc-rockchip: switch to FIELD_PREP_WM16 macro   Heiko Stuebner
• [PATCH v3 03/20] soc: rockchip: grf: switch to FIELD_PREP_WM16_CONST macro   Heiko Stuebner
• [PATCH v3 04/20] media: synopsys: hdmirx: replace macros with bitfield variants   Heiko Stuebner
• [PATCH v3 05/20] drm/rockchip: lvds: switch to FIELD_PREP_WM16 macro   Heiko Stuebner
• [PATCH v3 06/20] phy: rockchip-emmc: switch to FIELD_PREP_WM16 macro   Heiko Stuebner
• [PATCH v3 07/20] drm/rockchip: dsi: switch to FIELD_PREP_WM16* macros   Heiko Stuebner
• [PATCH v3 08/20] drm/rockchip: vop2: switch to FIELD_PREP_WM16 macro   Heiko Stuebner
• [PATCH v3 09/20] phy: rockchip-samsung-dcphy: switch to FIELD_PREP_WM16 macro   Heiko Stuebner
• [PATCH v3 10/20] drm/rockchip: dw_hdmi_qp: switch to FIELD_PREP_WM16 macro   Heiko Stuebner
• [PATCH v3 11/20] drm/rockchip: inno-hdmi: switch to FIELD_PREP_WM16 macro   Heiko Stuebner
• [PATCH v3 12/20] phy: rockchip-usb: switch to FIELD_PREP_WM16 macro   Heiko Stuebner
• [PATCH v3 13/20] drm/rockchip: dw_hdmi: switch to FIELD_PREP_WM16* macros   Heiko Stuebner
• [PATCH v3 14/20] ASoC: rockchip: i2s-tdm: switch to FIELD_PREP_WM16_CONST macro   Heiko Stuebner
• [PATCH v3 15/20] net: stmmac: dwmac-rk: switch to FIELD_PREP_WM16 macro   Heiko Stuebner
• [PATCH v3 16/20] PCI: rockchip: Switch to FIELD_PREP_WM16* macros   Heiko Stuebner
• [PATCH v3 17/20] PCI: dw-rockchip: Switch to FIELD_PREP_WM16 macro   Heiko Stuebner
• [PATCH v3 18/20] PM / devfreq: rockchip-dfi: switch to FIELD_PREP_WM16 macro   Heiko Stuebner
• [PATCH v3 20/20] phy: rockchip-pcie: switch to FIELD_PREP_WM16 macro   Heiko Stuebner
• [PATCH v3 19/20] clk: sp7021: switch to FIELD_PREP_WM16 macro   Heiko Stuebner
• [PATCH v3 09/14] phy: qcom: qmp-usbc: Add DP PHY ops for USB/DP switchable Type-C PHYs   Xiangxu Yin
• [PATCH v3 10/14] phy: qcom: qmp-usbc: Add TCSR parsing and USB/DP mode mutex handling   Xiangxu Yin
• [PATCH v3 11/14] phy: qcom: qmp-usbc: Finalize USB/DP switchable PHY support   Xiangxu Yin
• [PATCH v3 14/14] drm/msm/dp: Add support for lane mapping configuration   Xiangxu Yin
• [PATCH v3 07/14] phy: qcom: qmp-usbc: Move reset and regulator config into PHY cfg   Xiangxu Yin
• [PATCH v3 07/14] phy: qcom: qmp-usbc: Move reset and regulator config into PHY cfg   Dmitry Baryshkov
• [PATCH v3 0/3] arm64: dts: qcom: Add PCIe Support for sm8750   Manivannan Sadhasivam
• [PATCH RFC 01/22] dt-bindings: usb: snps,dwc3: Allow multiple iommus   Sven Peter
• [PATCH v3 09/14] phy: qcom: qmp-usbc: Add DP PHY ops for USB/DP switchable Type-C PHYs   Dmitry Baryshkov
• [PATCH v3 11/14] phy: qcom: qmp-usbc: Finalize USB/DP switchable PHY support   Dmitry Baryshkov
• [PATCH v3 07/14] phy: qcom: qmp-usbc: Move reset and regulator config into PHY cfg   Xiangxu Yin
• [PATCH v3 11/14] phy: qcom: qmp-usbc: Finalize USB/DP switchable PHY support   Xiangxu Yin
• [PATCH v3 01/14] dt-bindings: display/msm: dp-controller: Add sm6150   Xiangxu Yin
• [PATCH RFC 01/22] dt-bindings: usb: snps,dwc3: Allow multiple iommus   Krzysztof Kozlowski
• [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC   Wolfram Sang
• [PATCH v2 1/3] dt-bindings: ata: eswin: Document for EIC7700 SoC ahci   luyulin at eswincomputing.com
• [PATCH v3 01/14] dt-bindings: display/msm: dp-controller: Add sm6150   Dmitry Baryshkov
• [PATCH 0/3] phy: Remove redundant ternary operators   Liao Yuanhong
• [PATCH 1/3] phy: hisilicon: Remove redundant ternary operators   Liao Yuanhong
• [PATCH 2/3] phy: renesas: rcar-gen3-usb2: Remove redundant ternary operators   Liao Yuanhong
• [PATCH 3/3] phy: rockchip: usbdp: Remove redundant ternary operators   Liao Yuanhong
• [PATCH 2/3] phy: renesas: rcar-gen3-usb2: Remove redundant ternary operators   Wolfram Sang
• [PATCH v3 07/14] phy: qcom: qmp-usbc: Move reset and regulator config into PHY cfg   Dmitry Baryshkov
• [PATCH v2 1/3] dt-bindings: ata: eswin: Document for EIC7700 SoC ahci   Niklas Cassel
• [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC   claudiu beznea
• [PATCH v1 2/2] phy: mediatek: tphy: Add software role switching   Igor Belwon
• [PATCH RFC 07/22] usb: dwc3: apple: Adjust vendor-specific registers during init   Thinh Nguyen
• [PATCH RFC 05/22] usb: dwc3: apple: Do not use host-vbus-glitches workaround   Thinh Nguyen
• [PATCH RFC 04/22] usb: dwc3: apple: Reset dwc3 during role switches   Thinh Nguyen
• [PATCH RFC 04/22] usb: dwc3: apple: Reset dwc3 during role switches   Thinh Nguyen
• [PATCH v2 1/3] dt-bindings: ata: eswin: Document for EIC7700 SoC ahci   luyulin at eswincomputing.com
• [PATCH v3 0/6] phy: phy-can-transceiver: Support TJA1048/TJA1051   Peng Fan
• [PATCH v3 1/6] dt-bindings: phy: ti,tcan104x-can: Document NXP TJA105X/1048   Peng Fan
• [PATCH v3 2/6] phy: phy-can-transceiver: Introduce can_transceiver_priv   Peng Fan
• [PATCH v3 3/6] phy: phy-can-transceiver: Add dual channel support for TJA1048   Peng Fan
• [PATCH v3 4/6] arm64: dts: imx95-15x15-evk: Use phys to replace xceiver-supply   Peng Fan
• [PATCH v3 5/6] arm64: dts: imx8mp-evk: Use phys to replace xceiver-supply   Peng Fan
• [PATCH v3 6/6] arm64: dts: imx93-11x11-evk: Use phys to replace xceiver-supply   Peng Fan
• c22/c45 descision in phy_restart_aneg()   markus.stockhausen at gmx.de
• [PATCH v2 0/2] phy: add basic support for NXPs TJA1145 CAN transceiver   Dimitri Fedrau via B4 Relay
• [PATCH v2 1/2] dt-bindings: phy: add support for NXPs TJA1145 CAN transceiver   Dimitri Fedrau via B4 Relay
• [PATCH v2 2/2] phy: add basic support for NXPs TJA1145 CAN transceiver   Dimitri Fedrau via B4 Relay
• [PATCH RFC 08/22] usb: typec: tipd: Clear interrupts first   Heikki Krogerus
• c22/c45 descision in phy_restart_aneg()   Russell King (Oracle)
• [PATCH v7 5/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo ssphy   Pritam Manohar Sutar
• [PATCH v7 5/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo ssphy   Krzysztof Kozlowski
• [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC   Wolfram Sang
• [PATCH v7 5/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo ssphy   Alim Akhtar
• [PATCH v7 5/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo ssphy   Krzysztof Kozlowski
• [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC   claudiu beznea
• [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC   Wolfram Sang
• [PATCH v7 5/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo ssphy   Alim Akhtar
• [PATCH v7 5/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo ssphy   Pritam Manohar Sutar
• [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC   claudiu beznea
• [PATCH v2 1/2] dt-bindings: phy: add support for NXPs TJA1145 CAN transceiver   Krzysztof Kozlowski
• [PATCH v2 1/2] dt-bindings: phy: add support for NXPs TJA1145 CAN transceiver   Rob Herring (Arm)
• [PATCH v2 1/2] dt-bindings: phy: add support for NXPs TJA1145 CAN transceiver   Krzysztof Kozlowski
• [PATCH v3 1/6] dt-bindings: phy: ti,tcan104x-can: Document NXP TJA105X/1048   Frank Li
• [PATCH v3 2/6] phy: phy-can-transceiver: Introduce can_transceiver_priv   Frank Li
• [PATCH v3 3/6] phy: phy-can-transceiver: Add dual channel support for TJA1048   Frank Li
• [PATCH v3 6/6] arm64: dts: imx93-11x11-evk: Use phys to replace xceiver-supply   Frank Li
• [PATCH v3 07/12] dt-bindings: PCI: Add support for Tesla FSD SoC   Manivannan Sadhasivam
• [PATCH v3 07/12] dt-bindings: PCI: Add support for Tesla FSD SoC   Manivannan Sadhasivam
• [PATCH v3 11/12] PCI: exynos: Add support for Tesla FSD SoC   Manivannan Sadhasivam
• [PATCH v3 12/12] arm64: dts: fsd: Add PCIe support for Tesla FSD SoC   Manivannan Sadhasivam
• [PATCH V4 0/2] Add regulator load support for QMP UFS PHY   Nitin Rawat
• [PATCH V4 1/2] phy: qcom-qmp-ufs: Add regulator load voting for UFS QMP PHY   Nitin Rawat
• [PATCH V4 2/2] phy: qcom-qmp-ufs: Add PHY and PLL regulator load   Nitin Rawat
• [PATCH V4 2/2] phy: qcom-qmp-ufs: Add PHY and PLL regulator load   Manivannan Sadhasivam
• [PATCH v5 4/7] reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY   Claudiu Beznea
• [PATCH v4 0/6] phy: phy-can-transceiver: Support TJA1048/TJA1051   Peng Fan
• [PATCH v4 1/6] dt-bindings: phy: ti,tcan104x-can: Document NXP TJA105X/1048   Peng Fan
• [PATCH v4 2/6] phy: phy-can-transceiver: Introduce can_transceiver_priv   Peng Fan
• [PATCH v4 3/6] phy: phy-can-transceiver: Add dual channel support for TJA1048   Peng Fan
• [PATCH v4 4/6] arm64: dts: imx95-15x15-evk: Use phys to replace xceiver-supply   Peng Fan
• [PATCH v4 5/6] arm64: dts: imx8mp-evk: Use phys to replace xceiver-supply   Peng Fan
• [PATCH v4 6/6] arm64: dts: imx93-11x11-evk: Use phys to replace xceiver-supply   Peng Fan
• [PATCH v3 00/10] Add ASPEED PCIe Root Complex support   Jacky Chou
• [PATCH v3 01/10] dt-bindings: soc: aspeed: Add ASPEED PCIe Config   Jacky Chou
• [PATCH v3 02/10] dt-bindings: phy: aspeed: Add ASPEED PCIe PHY   Jacky Chou
• [PATCH v3 03/10] dt-bindings: PCI: Add ASPEED PCIe RC support   Jacky Chou
• [PATCH v3 04/10] dt-bindings: pinctrl: aspeed,ast2600-pinctrl: Add PCIe RC PERST# group   Jacky Chou
• [PATCH v3 05/10] ARM: dts: aspeed-g6: Add AST2600 PCIe RC PERST#   Jacky Chou
• [PATCH v3 06/10] ARM: dts: aspeed-g6: Add PCIe RC and PCIe PHY node   Jacky Chou
• [PATCH v3 07/10] PHY: aspeed: Add ASPEED PCIe PHY driver   Jacky Chou
• [PATCH v3 08/10] PCI: Add FMT and TYPE definition for TLP header   Jacky Chou
• [PATCH v3 09/10] PCI: aspeed: Add ASPEED PCIe RC driver   Jacky Chou
• [PATCH v3 10/10] MAINTAINERS: Add ASPEED PCIe RC driver   Jacky Chou

Last message date: Sun Aug 31 22:59:22 PDT 2025
Archived on: Sun Sep 7 23:47:45 PDT 2025

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...