[PATCH RFC 3/3] arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes

[Neil Armstrong]

The Thinkpad T14s embeds a transparent 4lanes DP->HDMI transceiver
connected to the third QMP Combo PHY 4 lanes.

Add all the data routing, disable mode switching and specify the
QMP Combo PHY should be in DP-Only mode to route the 4 lanes to
the underlying DP phy.

Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
 .../dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi    | 44 ++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
index 4cf61c2a34e31233b1adc93332bcabef22de3f86..5b62b8c3123633360f249e3ecdc8ea23f44e8e09 100644
--- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
@@ -62,6 +62,20 @@ switch-lid {
 		};
 	};
 
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+		pinctrl-0 = <&hdmi_hpd_default>;
+		pinctrl-names = "default";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+			};
+		};
+	};
+
 	pmic-glink {
 		compatible = "qcom,x1e80100-pmic-glink",
 			     "qcom,sm8550-pmic-glink",
@@ -1007,6 +1021,14 @@ &mdss_dp1_out {
 	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
+&mdss_dp2 {
+	status = "okay";
+};
+
+&mdss_dp2_out {
+	data-lanes = <0 1 2 3>;
+};
+
 &mdss_dp3 {
 	/delete-property/ #sound-dai-cells;
 
@@ -1263,6 +1285,12 @@ &tlmm {
 			       <72 2>, /* Secure EC I2C connection (?) */
 			       <238 1>; /* UFS Reset */
 
+	hdmi_hpd_default: hdmi-hpd-default-state {
+		pins = "gpio126";
+		function = "usb2_dp";
+		bias-disable;
+	};
+
 	eusb3_reset_n: eusb3-reset-n-state {
 		pins = "gpio6";
 		function = "gpio";
@@ -1486,6 +1514,22 @@ &usb_1_ss0_qmpphy_out {
 	remote-endpoint = <&retimer_ss0_ss_in>;
 };
 
+&usb_1_ss2_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	qcom,combo-initial-mode = "dp";
+
+	/delete-property/ mode-switch;
+	/delete-property/ orientation-switch;
+
+	status = "okay";
+};
+
+&usb_1_ss2_qmpphy_out {
+	remote-endpoint = <&hdmi_con>;
+};
+
 &usb_1_ss1_hsphy {
 	vdd-supply = <&vreg_l3j_0p8>;
 	vdda12-supply = <&vreg_l2j_1p2>;

-- 
2.34.1