[PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC

[Wolfram Sang]

> > Yes, I added it and it made the error go away, but still no USB. I
> 
> The drivers are not probed or you see no activity when connecting USB devices?

Sigh, I was so sure to have checked OHCI/EHCI but only EHCI was enabled :(

Checking with the schematics, I get it that only the rightmost USB-A
connectors on the carrier board are routed. Those two work fine now.

If that is to be expected, then for the whole series:

Tested-by: Wolfram Sang <wsa+renesas at sang-engineering.com>