[PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC

[claudiu beznea]

On 8/29/25 14:51, Wolfram Sang wrote:
> 
>>> Yes, I added it and it made the error go away, but still no USB. I
>>
>> The drivers are not probed or you see no activity when connecting USB devices?
> 
> Sigh, I was so sure to have checked OHCI/EHCI but only EHCI was enabled :(
> 
> Checking with the schematics, I get it that only the rightmost USB-A
> connectors on the carrier board are routed. Those two work fine now.
> 
> If that is to be expected, then for the whole series:

Yes, only those 2 are routed on RZ SMARC Carrier II + RZ/G3S SMARC Module.

> 
> Tested-by: Wolfram Sang <wsa+renesas at sang-engineering.com>
> 

Thank you for doing this,
Claudiu