[PATCH] phy: renesas: rcar-gen3-usb2: Fix ID check logic with VBUS valid

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>

The existing ID detection logic returned false when both IDDIG and
VBUSVALID were set, which caused incorrect role determination in some
cases. The condition:

    !(device && !vbus_valid)

did not properly reflect the intended relationship between IDDIG and
VBUSVALID signals.

Update the logic to:

    return vbus_valid ? device : !device;

This ensures that when VBUS is valid, the role follows the IDDIG value,
and when VBUS is not valid, the role is inverted, matching the expected
OTG behavior.

Fixes: b725741f1c21 ("phy: renesas: rcar-gen3-usb2: Add support for RZ/T2H SoC")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
---
 drivers/phy/renesas/phy-rcar-gen3-usb2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 7b4a6e8b7508..70498145f0f3 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -302,7 +302,7 @@ static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
 		device = !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
 		vbus_valid = !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_VBUSVALID);
 
-		return !(device && !vbus_valid);
+		return vbus_valid ? device : !device;
 	}
 
 	if (!ch->uses_otg_pins)
-- 
2.51.0