[PATCH v5 1/7] dt-bindings: phy: renesas,usb2-phy: Mark resets as required for RZ/G3S

[Rob Herring (Arm)]

On Tue, 19 Aug 2025 08:42:06 +0300, Claudiu wrote:
> From: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
> 
> The reset lines are mandatory for the Renesas RZ/G3S platform and must be
> explicitly defined in device tree.
> 
> Fixes: f3c849855114 ("dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings")
> Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
> Acked-by: Conor Dooley <conor.dooley at microchip.com>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
> ---
> 
> Changes in v5:
> - none
> 
> Changes in v4:
> - none
> 
> Changes in v3:
> - collected tags
> - rebased on top of latest version of renesas,usb2-phy.yaml;
>   Conor, Geert: I kept your tags; please let me know if you consider it
>   otherwise
> 
> Changes in v2:
> - none; this patch is new
> 
>  Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250819054212.486426-2-claudiu.beznea.uj@bp.renesas.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.