August 2023 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Aug 1 01:48:07 PDT 2023
Ending: Thu Aug 31 13:40:39 PDT 2023
Messages: 494

• [PATCH net] net: macb: In ZynqMP resume always configure PS GTR for non-wakeup source   Russell King (Oracle)
• [RFC PATCH net-next 2/8] phy: introduce the PHY_MODE_ETHERNET_PHY mode for phy_set_mode_ext()   Russell King (Oracle)
• [PATCH v2 0/9] Add pmics supported in Qualcomm's SDX75 platform   Rohit Agarwal
• [PATCH v2 1/9] dt-bindings: phy: qcom,snps-eusb2-repeater: Add compatible for PM7550BA   Rohit Agarwal
• [PATCH v2 2/9] arm64: dts: qcom: sdx75: Add spmi node   Rohit Agarwal
• [PATCH v2 3/9] arm64: dts: qcom: Add pinctrl gpio support for pm7250b   Rohit Agarwal
• [PATCH v2 4/9] arm64: dts: qcom: Add pm7550ba PMIC dtsi   Rohit Agarwal
• [PATCH v2 5/9] arm64: dts: qcom: Add pmx75 PMIC dtsi   Rohit Agarwal
• [PATCH v2 6/9] ARM: dts: qcom: sdx65-mtp: Update the pmic used in sdx65   Rohit Agarwal
• [PATCH v2 7/9] arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75   Rohit Agarwal
• [PATCH v2 8/9] arm64: dts: qcom: sdx75: Add rpmhpd node   Rohit Agarwal
• [PATCH v2 9/9] arm64: dts: qcom: sdx75-idp: Add regulator nodes   Rohit Agarwal
• [PATCH v2 0/9] Add pmics supported in Qualcomm's SDX75 platform   Rohit Agarwal
• [PATCH v2 0/9] Add pmics supported in Qualcomm's SDX75 platform   Rohit Agarwal
• [PATCH v2 1/9] dt-bindings: phy: qcom,snps-eusb2-repeater: Add compatible for PM7550BA   Rohit Agarwal
• [PATCH v2 2/9] arm64: dts: qcom: sdx75: Add spmi node   Rohit Agarwal
• [PATCH v2 3/9] arm64: dts: qcom: Add pinctrl gpio support for pm7250b   Rohit Agarwal
• [PATCH v2 4/9] arm64: dts: qcom: Add pm7550ba PMIC dtsi   Rohit Agarwal
• [PATCH v2 5/9] arm64: dts: qcom: Add pmx75 PMIC dtsi   Rohit Agarwal
• [PATCH v2 6/9] ARM: dts: qcom: sdx65-mtp: Update the pmic used in sdx65   Rohit Agarwal
• [PATCH v2 7/9] arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75   Rohit Agarwal
• [PATCH v2 8/9] arm64: dts: qcom: sdx75: Add rpmhpd node   Rohit Agarwal
• [PATCH v2 9/9] arm64: dts: qcom: sdx75-idp: Add regulator nodes   Rohit Agarwal
• [PATCH v2 0/9] Add pmics supported in Qualcomm's SDX75 platform   Rohit Agarwal
• [PATCH RESEND v2 0/9] Add pmics supported in Qualcomm's SDX75 platform   Rohit Agarwal
• [PATCH RESEND v2 1/9] dt-bindings: phy: qcom,snps-eusb2-repeater: Add compatible for PM7550BA   Rohit Agarwal
• [PATCH RESEND v2 2/9] arm64: dts: qcom: sdx75: Add spmi node   Rohit Agarwal
• [PATCH RESEND v2 3/9] arm64: dts: qcom: Add pinctrl gpio support for pm7250b   Rohit Agarwal
• [PATCH RESEND v2 4/9] arm64: dts: qcom: Add pm7550ba PMIC dtsi   Rohit Agarwal
• [PATCH RESEND v2 5/9] arm64: dts: qcom: Add pmx75 PMIC dtsi   Rohit Agarwal
• [PATCH RESEND v2 6/9] ARM: dts: qcom: sdx65-mtp: Update the pmic used in sdx65   Rohit Agarwal
• [PATCH RESEND v2 7/9] arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75   Rohit Agarwal
• [PATCH RESEND v2 8/9] arm64: dts: qcom: sdx75: Add rpmhpd node   Rohit Agarwal
• [PATCH RESEND v2 9/9] arm64: dts: qcom: sdx75-idp: Add regulator nodes   Rohit Agarwal
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Sean Anderson
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Sean Anderson
• [RFC PATCH net-next 2/8] phy: introduce the PHY_MODE_ETHERNET_PHY mode for phy_set_mode_ext()   Sean Anderson
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Sean Anderson
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Sean Anderson
• [RFC PATCH net-next 2/8] phy: introduce the PHY_MODE_ETHERNET_PHY mode for phy_set_mode_ext()   Sean Anderson
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Sean Anderson
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Sean Anderson
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Sean Anderson
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Sean Anderson
• [PATCH v7 2/5] phy: qcom-m31: Introduce qcom,m31 USB phy driver   Bjorn Andersson
• (subset) [PATCH RESEND v2 0/9] Add pmics supported in Qualcomm's SDX75 platform   Bjorn Andersson
• [PATCH v8 2/5] phy: qcom: Introduce M31 USB PHY driver   Bjorn Andersson
• [PATCH v3 1/3] drm/display: add transparent bridge helper   Neil Armstrong
• [PATCH v3 1/3] drm/display: add transparent bridge helper   Neil Armstrong
• [PATCH v3 1/3] drm/display: add transparent bridge helper   Neil Armstrong
• [PATCH net-next] phy: amlogic: meson-g12a-usb2: fix Wvoid-pointer-to-enum-cast warning   Neil Armstrong
• [PATCH v4 0/3] drm: simplify support for transparent DRM bridges   Neil Armstrong
• [PATCH v3 0/3] drm/display: simplify support for transparent DRM bridges   Dmitry Baryshkov
• [PATCH v3 1/3] drm/display: add transparent bridge helper   Dmitry Baryshkov
• [PATCH v3 2/3] phy: qcom: qmp-combo: switch to DRM_SIMPLE_BRIDGE   Dmitry Baryshkov
• [PATCH v3 3/3] usb: typec: nb7vpq904m: switch to DRM_SIMPLE_BRIDGE   Dmitry Baryshkov
• [PATCH v3 1/3] drm/display: add transparent bridge helper   Dmitry Baryshkov
• [PATCH V1 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280   Dmitry Baryshkov
• [PATCH V1 1/2] dt-bindings: phy: Add QMP UFS PHY comptible for SC7280   Dmitry Baryshkov
• [PATCH v8 2/7] phy: Add HDMI configuration options   Dmitry Baryshkov
• [PATCH v4 0/3] drm: simplify support for transparent DRM bridges   Dmitry Baryshkov
• [PATCH v4 1/3] drm/bridge: add transparent bridge helper   Dmitry Baryshkov
• [PATCH v4 2/3] phy: qcom: qmp-combo: switch to DRM_AUX_BRIDGE   Dmitry Baryshkov
• [PATCH v4 3/3] usb: typec: nb7vpq904m: switch to DRM_AUX_BRIDGE   Dmitry Baryshkov
• [PATCH v3 00/18] phy: qcom-qmp-pcie: convert to newer style of bindings   Dmitry Baryshkov
• [PATCH v3 01/18] dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml   Dmitry Baryshkov
• [PATCH v3 02/18] dt-bindings: phy: qcom,qmp-pcie: describe SM8150 PCIe PHYs   Dmitry Baryshkov
• [PATCH v3 03/18] phy: qcom-qmp-pcie: drop ln_shrd from v5_20 config   Dmitry Baryshkov
• [PATCH v3 04/18] phy: qcom-qmp-pcie: keep offset tables sorted   Dmitry Baryshkov
• [PATCH v3 05/18] phy: qcom-qmp-pcie: simplify clock handling   Dmitry Baryshkov
• [PATCH v3 06/18] phy: qcom-qmp-pcie: populate offsets configuration   Dmitry Baryshkov
• [PATCH v3 07/18] phy: qcom-qmp-pcie: support SM8150 PCIe QMP PHYs   Dmitry Baryshkov
• [PATCH v3 08/18] arm64: dts: qcom: ipq6018: switch PCIe QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v3 09/18] arm64: dts: qcom: ipq8074: switch PCIe QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v3 10/18] arm64: dts: qcom: msm8998: switch PCIe QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v3 11/18] arm64: dts: qcom: sc7280: switch PCIe QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v3 12/18] arm64: dts: qcom: sc8180x: switch PCIe QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v3 13/18] arm64: dts: qcom: sdm845: switch PCIe QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v3 14/18] arm64: dts: qcom: sm8150: add ref clock to PCIe PHYs   Dmitry Baryshkov
• [PATCH v3 15/18] arm64: dts: qcom: sm8150: switch PCIe QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v3 16/18] arm64: dts: qcom: sm8250: switch PCIe QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v3 17/18] arm64: dts: qcom: sm8450: switch PCIe QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v3 18/18] ARM: dts: qcom-sdx55: switch PCIe QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH] phy: qcom-qmp-combo: fix clock probing   Dmitry Baryshkov
• [PATCH v2 00/16] phy: qcom-qmp-usb: convert to newer style of bindings   Dmitry Baryshkov
• [PATCH v2 01/16] dt-bindings: phy: migrate QMP USB PHY bindings to qcom,sc8280xp-qmp-usb3-uni-phy.yaml   Dmitry Baryshkov
• [PATCH v2 02/16] phy: qcom-qmp-usb: simplify clock handling   Dmitry Baryshkov
• [PATCH v2 03/16] phy: qcom-qmp-usb: rework reset handling   Dmitry Baryshkov
• [PATCH v2 04/16] phy: qcom-qmp-usb: make QPHY_PCS_MISC_CLAMP_ENABLE access conditional   Dmitry Baryshkov
• [PATCH v2 05/16] phy: qcom-qmp: move PCS MISC V4 registers to separate header   Dmitry Baryshkov
• [PATCH v2 06/16] phy: qcom-qmp-usb: populate offsets configuration   Dmitry Baryshkov
• [PATCH v2 07/16] arm64: dts: qcom: ipq6018: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v2 08/16] arm64: dts: qcom: ipq8074: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v2 09/16] arm64: dts: qcom: msm8996: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v2 10/16] arm64: dts: qcom: msm8998: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v2 11/16] arm64: dts: qcom: sdm845: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v2 12/16] arm64: dts: qcom: sm8150: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v2 13/16] arm64: dts: qcom: sm8250: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v2 14/16] arm64: dts: qcom: sm8350: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v2 15/16] ARM: dts: qcom-sdx55: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v2 16/16] ARM: dts: qcom-sdx65: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v9 1/4] phy: qcom: m31: Fix indentation issues   Dmitry Baryshkov
• [PATCH v9 1/4] phy: qcom: m31: Fix indentation issues   Dmitry Baryshkov
• [PATCH v9 4/4] arm64: defconfig: Enable M31 USB phy driver   Dmitry Baryshkov
• [PATCH v8 2/7] phy: Add HDMI configuration options   Dmitry Baryshkov
• [PATCH] dt-bindings: phy: qcom,ipq8074-qmp-pcie: fix warning regarding reg size   Dmitry Baryshkov
• [PATCH v2 10/16] arm64: dts: qcom: msm8998: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH 2/2] phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775p   Dmitry Baryshkov
• [PATCH 1/2] phy: qcom-qmp-usb: initialize PCS_USB registers   Dmitry Baryshkov
• [PATCH v3 00/16] phy: qcom-qmp-usb: convert to newer style of bindings   Dmitry Baryshkov
• [PATCH v3 01/16] dt-bindings: phy: migrate QMP USB PHY bindings to qcom,sc8280xp-qmp-usb3-uni-phy.yaml   Dmitry Baryshkov
• [PATCH v3 02/16] phy: qcom-qmp-usb: simplify clock handling   Dmitry Baryshkov
• [PATCH v3 03/16] phy: qcom-qmp-usb: rework reset handling   Dmitry Baryshkov
• [PATCH v3 04/16] phy: qcom-qmp-usb: make QPHY_PCS_MISC_CLAMP_ENABLE access conditional   Dmitry Baryshkov
• [PATCH v3 05/16] phy: qcom-qmp: move PCS MISC V4 registers to separate header   Dmitry Baryshkov
• [PATCH v3 06/16] phy: qcom-qmp-usb: populate offsets configuration   Dmitry Baryshkov
• [PATCH v3 07/16] arm64: dts: qcom: ipq6018: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v3 08/16] arm64: dts: qcom: ipq8074: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v3 09/16] arm64: dts: qcom: msm8996: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v3 10/16] arm64: dts: qcom: msm8998: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v3 11/16] arm64: dts: qcom: sdm845: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v3 12/16] arm64: dts: qcom: sm8150: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v3 13/16] arm64: dts: qcom: sm8250: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v3 14/16] arm64: dts: qcom: sm8350: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v3 15/16] ARM: dts: qcom-sdx55: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v3 16/16] ARM: dts: qcom-sdx65: switch USB QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v2 1/2] phy: qcom-qmp-usb: initialize PCS_USB registers   Dmitry Baryshkov
• [PATCH v4 0/3] drm: simplify support for transparent DRM bridges   Dmitry Baryshkov
• [PATCH v10 3/4] arm64: dts: qcom: ipq5332: Enable USB   Dmitry Baryshkov
• [PATCH v10 1/4] phy: qcom: m31: Fix indentation issues   Dmitry Baryshkov
• [PATCH 4/9] dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY   Dmitry Baryshkov
• [PATCH 1/9] dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY   Dmitry Baryshkov
• [PATCH 3/9] phy: qcom: uniphy: Update UNIPHY driver to be a common driver   Dmitry Baryshkov
• [PATCH 8/9] phy: qcom: uniphy: Add ipq5332 USB UNIPHY support   Dmitry Baryshkov
• [PATCH 6/9] arm64: dts: qcom: ipq5332: Add USB3 related nodes   Dmitry Baryshkov
• [PATCH 4/9] dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY   Dmitry Baryshkov
• [PATCH 2/2] phy: qcom-qmp-combo: initialize PCS_USB registers   Dmitry Baryshkov
• [PATCH 1/2] phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1   Dmitry Baryshkov
• [PATCH V2 3/4] arm64: dts: qcom: ipq5018: Add USB related nodes   Dmitry Baryshkov
• [PATCH V2 2/4] phy: qcom-m31: Add compatible, phy init sequence for IPQ5018   Dmitry Baryshkov
• [PATCH 5/5] arm64: dts: qcom: ipq5018: Enable USB   Dmitry Baryshkov
• [PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes   Dmitry Baryshkov
• [PATCH v11 2/4] arm64: dts: qcom: ipq5332: Add USB related nodes   Dmitry Baryshkov
• [PATCH v11 3/4] arm64: dts: qcom: ipq5332: Enable USB   Dmitry Baryshkov
• [PATCH 1/9] dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY   Dmitry Baryshkov
• [PATCH 8/9] phy: qcom: uniphy: Add ipq5332 USB UNIPHY support   Dmitry Baryshkov
• [PATCH 1/9] dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY   Dmitry Baryshkov
• [PATCH 00/31] Fix and improve Rockchip RK3128 support   Alex Bee
• [PATCH 01/31] dt-bindings: mfd: syscon: Add rockchip,rk3128-qos compatible   Alex Bee
• [PATCH 02/31] dt-bindings: gpu: mali-utgard: Add Rockchip RK3128 compatible   Alex Bee
• [PATCH 03/31] dt-bindings: ASoC: rockchip: Add compatible for RK3128 spdif   Alex Bee
• [PATCH 04/31] dt-bindings: arm: rockchip: Add Geniatech XPI-3128   Alex Bee
• [PATCH 05/31] clk: rockchip: rk3128: Fix aclk_peri_src parent   Alex Bee
• [PATCH 06/31] clk: rockchip: rk3128: Fix hclk_otg gate   Alex Bee
• [PATCH 07/31] clk: rockchip: rk3128: Fix SCLK_SDMMC's clock name   Alex Bee
• [PATCH 08/31] phy: rockchip-inno-usb2: Split ID interrupt phy registers   Alex Bee
• [PATCH 09/31] phy: phy-rockchip-inno-usb2: Add RK3128 support   Alex Bee
• [PATCH 10/31] ARM: dts: rockchip: Fix i2c0 register address for RK3128   Alex Bee
• [PATCH 11/31] ARM: dts: rockchip: Add missing arm timer interrupt for RK3128   Alex Bee
• [PATCH 12/31] ARM: dts: rockchip: Add missing quirk for RK3128's dma engine   Alex Bee
• [PATCH 13/31] ARM: dts: rockchip: Fix timer clocks for RK3128   Alex Bee
• [PATCH 14/31] ARM: dts: rockchip: Disable non-required timers for RK3128   Alex Bee
• [PATCH 15/31] ARM: dts: rockchip: Split RK3128 devictree for RK312x SoC family   Alex Bee
• [PATCH 16/31] ARM: dts: rockchip: Add SRAM node for RK312x   Alex Bee
• [PATCH 17/31] ARM: dts: rockchip: Add CPU resets for RK312x   Alex Bee
• [PATCH 18/31] ARM: dts: rockchip: Enable SMP bringup for RK312x   Alex Bee
• [PATCH 19/31] ARM: dts: rockchip: Switch to operating-points-v2 for RK312x's CPU   Alex Bee
• [PATCH 20/31] ARM: dts: rockchip: Add extra CPU voltages for RK3126   Alex Bee
• [PATCH 21/31] ARM: dts: rockchip: add power controller for RK312x   Alex Bee
• [PATCH 22/31] ARM: dts: rockchip: Add GPU node for RK312x   Alex Bee
• [PATCH 23/31] ARM: dts: rockchip: Add 2-channel I2S for RK312x   Alex Bee
• [PATCH 24/31] ARM: dts: rockchip: Add 8-channel I2S for RK3128   Alex Bee
• [PATCH 25/31] ARM: dts: rockchip: Add spdif for RK3128   Alex Bee
• [PATCH 26/31] ARM: dts: rockchip: Add gmac for RK3128   Alex Bee
• [PATCH 27/31] ARM: dts: rockchip: Add dwc2 otg fifo siztes for RK312x   Alex Bee
• [PATCH 28/31] ARM: dts: rockchip: Add USB host clocks for RK312x   Alex Bee
• [PATCH 29/31] ARM: dts: rockchip: Make usbphy the parent of SCLK_USB480M for RK312x   Alex Bee
• [PATCH 30/31] ARM: dts: rockchip: Add sdmmc_det pinctrl for RK312x   Alex Bee
• [PATCH 31/31] ARM: dts: Add Geniatech XPI-3128 RK3128 board   Alex Bee
• [PATCH 05/31] clk: rockchip: rk3128: Fix aclk_peri_src parent   Alex Bee
• [PATCH v2 0/5] Add USB support for RK3128   Alex Bee
• [PATCH v2 1/5] phy: rockchip-inno-usb2: Split ID interrupt phy registers   Alex Bee
• [PATCH v2 2/5] phy: phy-rockchip-inno-usb2: Add RK3128 support   Alex Bee
• [PATCH v2 3/5] ARM: dts: rockchip: Add USB host clocks for RK3128   Alex Bee
• [PATCH v2 4/5] ARM: dts: rockchip: Add dwc2 otg fifo siztes for RK3128   Alex Bee
• [PATCH v2 5/5] ARM: dts: rockchip: Make usbphy the parent of SCLK_USB480M for RK3128   Alex Bee
• [IGNORE][PATCH v4 01/11] dt-bindings: Document common device controller bindings   Gatien CHEVALLIER
• [PATCH v3 1/3] drm/display: add transparent bridge helper   Dan Carpenter
• [PATCH v4 00/11] Introduce STM32 Firewall framework   Gatien Chevallier
• [IGNORE][PATCH v4 01/11] dt-bindings: Document common device controller bindings   Gatien Chevallier
• [PATCH v4 02/11] dt-bindings: treewide: add feature-domains description   Gatien Chevallier
• [PATCH v4 03/11] dt-bindings: bus: document RIFSC   Gatien Chevallier
• [PATCH v4 04/11] dt-bindings: bus: document ETZPC   Gatien Chevallier
• [PATCH v4 05/11] firewall: introduce stm32_firewall framework   Gatien Chevallier
• [PATCH v4 06/11] of: property: fw_devlink: Add support for "feature-domains"   Gatien Chevallier
• [PATCH v4 07/11] bus: rifsc: introduce RIFSC firewall controller driver   Gatien Chevallier
• [PATCH v4 08/11] arm64: dts: st: add RIFSC as a domain controller for STM32MP25x boards   Gatien Chevallier
• [PATCH v4 09/11] bus: etzpc: introduce ETZPC firewall controller driver   Gatien Chevallier
• [PATCH v4 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards   Gatien Chevallier
• [PATCH v4 11/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards   Gatien Chevallier
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Ioana Ciornei
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Ioana Ciornei
• [PATCH] clk: Annotate struct clk_hw_onecell_data with __counted_by   Kees Cook
• [PATCH v2 1/2] dt-bindings: phy: mediatek,tphy: allow simple nodename pattern   Conor Dooley
• [PATCH 1/2] dt-bindings: phy: qcom,usb-snps-femto-v2: Add REFGEN regulator   Conor Dooley
• [PATCH v2 0/9] Add pmics supported in Qualcomm's SDX75 platform   Konrad Dybcio
• [PATCH v2 0/9] Add pmics supported in Qualcomm's SDX75 platform   Konrad Dybcio
• [PATCH RESEND v2 2/9] arm64: dts: qcom: sdx75: Add spmi node   Konrad Dybcio
• [PATCH RESEND v2 5/9] arm64: dts: qcom: Add pmx75 PMIC dtsi   Konrad Dybcio
• [PATCH RESEND v2 6/9] ARM: dts: qcom: sdx65-mtp: Update the pmic used in sdx65   Konrad Dybcio
• [PATCH RESEND v2 7/9] arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75   Konrad Dybcio
• [PATCH RESEND v2 8/9] arm64: dts: qcom: sdx75: Add rpmhpd node   Konrad Dybcio
• [PATCH RESEND v2 9/9] arm64: dts: qcom: sdx75-idp: Add regulator nodes   Konrad Dybcio
• [PATCH v7 2/5] phy: qcom-m31: Introduce qcom,m31 USB phy driver   Konrad Dybcio
• [PATCH V1 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280   Konrad Dybcio
• [PATCH V1 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280   Konrad Dybcio
• [PATCH v2 1/2] phy: qcom-qmp-usb: initialize PCS_USB registers   Konrad Dybcio
• [PATCH 0/2] 8550 USB QMPPHY fixups   Konrad Dybcio
• [PATCH 1/2] phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1   Konrad Dybcio
• [PATCH 2/2] phy: qcom-qmp-combo: initialize PCS_USB registers   Konrad Dybcio
• [PATCH 0/4] EUSB2 repeater init sequence override   Konrad Dybcio
• [PATCH 1/4] dt-bindings: phy: qcom,snps-eusb2-repeater: Add magic tuning overrides   Konrad Dybcio
• [PATCH 2/4] phy: qualcomm: phy-qcom-eusb2-repeater: Use regmap_fields   Konrad Dybcio
• [PATCH 3/4] phy: qualcomm: phy-qcom-eusb2-repeater: Zero out untouched tuning regs   Konrad Dybcio
• [PATCH 4/4] phy: qualcomm: phy-qcom-eusb2-repeater: Add tuning overrides   Konrad Dybcio
• [PATCH V2 2/4] phy: qcom-m31: Add compatible, phy init sequence for IPQ5018   Konrad Dybcio
• [PATCH 0/2] FEMTOPHY REFGEN regulator   Konrad Dybcio
• [PATCH 1/2] dt-bindings: phy: qcom,usb-snps-femto-v2: Add REFGEN regulator   Konrad Dybcio
• [PATCH 2/2] phy: qcom-snps-femto-v2: Add REFGEN supply   Konrad Dybcio
• [PATCH 3/4] phy: qualcomm: phy-qcom-eusb2-repeater: Zero out untouched tuning regs   Konrad Dybcio
• [PATCH 1/2] dt-bindings: phy: qcom,usb-snps-femto-v2: Add REFGEN regulator   Konrad Dybcio
• [PATCH] dt-bindings: phy: st: convert phy-stih407-usb to DT schema   Raphael Gallais-Pou
• [PATCH v2] dt-bindings: phy: st: convert phy-stih407-usb to DT schema   Raphael Gallais-Pou
• [PATCH v3] dt-bindings: phy: st: convert phy-stih407-usb to DT schema   Raphael Gallais-Pou
• [PATCH v7 1/5] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy   Rob Herring
• [PATCH v7 1/5] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy   Rob Herring
• [PATCH 03/14] dt-bindings: phy: rockchip-inno-dsidphy: Document rv1126   Rob Herring
• [PATCH] dt-bindings: phy: st: convert phy-stih407-usb to DT schema   Rob Herring
• [RFC PATCH net-next 8/8] dt-bindings: net: fsl,backplane-anlt: new binding document   Rob Herring
• [PATCH v3 01/18] dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml   Rob Herring
• [PATCH] dt-bindings: phy: qcom,ipq8074-qmp-pcie: fix warning regarding reg size   Rob Herring
• [PATCH 4/9] dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY   Rob Herring
• [PATCH 4/9] dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY   Rob Herring
• [PATCH 1/2] dt-bindings: phy: qcom,usb-snps-femto-v2: Add REFGEN regulator   Rob Herring
• [PATCH v4 05/11] firewall: introduce stm32_firewall framework   Simon Horman
• [PATCH v2 1/2] dt-bindings: phy: mediatek,tphy: allow simple nodename pattern   Eugen Hristev
• [PATCH v2 2/2] arm64: dts: mediatek: fix t-phy unit name   Eugen Hristev
• [PATCH 0/9] Enable USB3 for IPQ5332   Praveenkumar I
• [PATCH 1/9] dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY   Praveenkumar I
• [PATCH 2/9] phy: qcom: uniphy: Rename ipq4019 USB phy driver to UNIPHY driver   Praveenkumar I
• [PATCH 3/9] phy: qcom: uniphy: Update UNIPHY driver to be a common driver   Praveenkumar I
• [PATCH 4/9] dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY   Praveenkumar I
• [PATCH 5/9] dt-bindings: usb: dwc3: Update IPQ5332 compatible   Praveenkumar I
• [PATCH 6/9] arm64: dts: qcom: ipq5332: Add USB3 related nodes   Praveenkumar I
• [PATCH 7/9] arm64: dts: qcom: ipq5332: Enable USB SS UNIPHY   Praveenkumar I
• [PATCH 8/9] phy: qcom: uniphy: Add ipq5332 USB UNIPHY support   Praveenkumar I
• [PATCH 9/9] arm64: defconfig: Enable UNIPHY driver   Praveenkumar I
• [PATCH 1/9] dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY   Praveenkumar I
• [PATCH 3/9] phy: qcom: uniphy: Update UNIPHY driver to be a common driver   Praveenkumar I
• [PATCH 0/9] Enable USB3 for IPQ5332   Praveenkumar I
• [PATCH 0/9] Enable USB3 for IPQ5332   Praveenkumar I
• [PATCH 1/9] dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY   Praveenkumar I
• [PATCH 1/9] dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY   Praveenkumar I
• [PATCH 2/9] phy: qcom: uniphy: Rename ipq4019 USB phy driver to UNIPHY driver   Praveenkumar I
• [PATCH -next] phy: realtek: usb: Drop unnecessary error check for debugfs_create_dir   Ruan Jinjie
• [IGNORE][PATCH v4 01/11] dt-bindings: Document common device controller bindings   Greg KH
• [PATCH 1/1] phy: fsl-imx8mq-usb: add dev_err_probe if getting vbus failed   Vinod Koul
• [PATCH v7 2/5] phy: qcom-m31: Introduce qcom,m31 USB phy driver   Vinod Koul
• [PATCH] phy: qcom: qmp-ufs: add missing offsets to sm8150 configuration   Vinod Koul
• [PATCH] MAINTAINERS: correct file entry in STARFIVE JH7110 DPHY RX DRIVER   Vinod Koul
• (subset) [PATCH RESEND v2 0/9] Add pmics supported in Qualcomm's SDX75 platform   Vinod Koul
• [PATCH 1/4] phy: broadcom: sata: fix Wvoid-pointer-to-enum-cast warning   Vinod Koul
• [PATCH] phy: realtek: Realtek PHYs should depend on ARCH_REALTEK   Vinod Koul
• [PATCH V1 1/2] dt-bindings: phy: Add QMP UFS PHY comptible for SC7280   Vinod Koul
• [PATCH 1/1] phy: fsl-imx8mq-usb: add dev_err_probe if getting vbus failed   Vinod Koul
• (subset) [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer style of bindings   Vinod Koul
• [PATCH net-next] phy: amlogic: meson-g12a-usb2: fix Wvoid-pointer-to-enum-cast warning   Vinod Koul
• (subset) [PATCH v2 1/2] dt-bindings: phy: mediatek,tphy: allow simple nodename pattern   Vinod Koul
• (subset) [PATCH v8 0/5] Enable IPQ5332 USB2   Vinod Koul
• [PATCH v2 1/1] phy: fsl-imx8mq-usb: add dev_err_probe if getting vbus failed   Vinod Koul
• [PATCH v4 2/3] phy: qcom: qmp-combo: switch to DRM_AUX_BRIDGE   Vinod Koul
• [PATCH v8 2/7] phy: Add HDMI configuration options   Vinod Koul
• [PATCH V2 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280   Vinod Koul
• [PATCH 2/8] dt-bindings: phy: samsung,usb3-drd-phy: Add Exynos850 support   Vinod Koul
• (subset) [PATCH v3 00/18] phy: qcom-qmp-pcie: convert to newer style of bindings   Vinod Koul
• [PATCH] phy: qcom-qmp-combo: fix clock probing   Vinod Koul
• (subset) [PATCH 0/8] arm64: exynos: Enable USB for E850-96 board   Vinod Koul
• [PATCH RESEND v2 1/9] dt-bindings: phy: qcom,snps-eusb2-repeater: Add compatible for PM7550BA   Krzysztof Kozlowski
• [PATCH net-next] phy: amlogic: meson-g12a-usb2: fix Wvoid-pointer-to-enum-cast warning   Krzysztof Kozlowski
• [PATCH 1/4] phy: broadcom: sata: fix Wvoid-pointer-to-enum-cast warning   Krzysztof Kozlowski
• [PATCH 2/4] phy: broadcom: ns-usb3: fix Wvoid-pointer-to-enum-cast warning   Krzysztof Kozlowski
• [PATCH 3/4] phy: broadcom: sr-usb: fix Wvoid-pointer-to-enum-cast warning   Krzysztof Kozlowski
• [PATCH 4/4] phy: marvell pxa-usb: fix Wvoid-pointer-to-enum-cast warning   Krzysztof Kozlowski
• [PATCH net-next] phy: amlogic: meson-g12a-usb2: fix Wvoid-pointer-to-enum-cast warning   Krzysztof Kozlowski
• [PATCH v7 4/5] arm64: dts: qcom: ipq5332: Enable USB   Krzysztof Kozlowski
• [PATCH v7 3/5] arm64: dts: qcom: ipq5332: Add USB related nodes   Krzysztof Kozlowski
• [PATCH v7 2/5] phy: qcom-m31: Introduce qcom,m31 USB phy driver   Krzysztof Kozlowski
• [PATCH V1 1/2] dt-bindings: phy: Add QMP UFS PHY comptible for SC7280   Krzysztof Kozlowski
• [PATCH 1/8] dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support   Krzysztof Kozlowski
• [PATCH 2/8] dt-bindings: phy: samsung,usb3-drd-phy: Add Exynos850 support   Krzysztof Kozlowski
• [PATCH 3/8] usb: dwc3: exynos: Add support for Exynos850 variant   Krzysztof Kozlowski
• [PATCH 4/8] phy: exynos5-usbdrd: Make it possible to pass custom phy ops   Krzysztof Kozlowski
• [PATCH 5/8] phy: exynos5-usbdrd: Add 26MHz ref clk support   Krzysztof Kozlowski
• [PATCH 6/8] phy: exynos5-usbdrd: Add Exynos850 support   Krzysztof Kozlowski
• [PATCH 7/8] arm64: dts: exynos: Enable USB in Exynos850   Krzysztof Kozlowski
• [PATCH 8/8] arm64: dts: exynos: Enable USB support on E850-96 board   Krzysztof Kozlowski
• [PATCH V2 1/2] dt-bindings: phy: Add QMP UFS PHY comptible for SC7280   Krzysztof Kozlowski
• [PATCH v8 3/7] dt-bindings: display: bridge: Add Cadence MHDP850   Krzysztof Kozlowski
• [PATCH v2 01/13] dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml   Krzysztof Kozlowski
• [PATCH v3 01/18] dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml   Krzysztof Kozlowski
• [PATCH v3 02/18] dt-bindings: phy: qcom,qmp-pcie: describe SM8150 PCIe PHYs   Krzysztof Kozlowski
• [PATCH v2 01/16] dt-bindings: phy: migrate QMP USB PHY bindings to qcom,sc8280xp-qmp-usb3-uni-phy.yaml   Krzysztof Kozlowski
• [PATCH v9 3/4] arm64: dts: qcom: ipq5332: Enable USB   Krzysztof Kozlowski
• [PATCH v9 2/4] arm64: dts: qcom: ipq5332: Add USB related nodes   Krzysztof Kozlowski
• [PATCH v9 1/4] phy: qcom: m31: Fix indentation issues   Krzysztof Kozlowski
• [PATCH v2] dt-bindings: phy: st: convert phy-stih407-usb to DT schema   Krzysztof Kozlowski
• [PATCH v3] dt-bindings: phy: st: convert phy-stih407-usb to DT schema   Krzysztof Kozlowski
• [PATCH v3 01/16] dt-bindings: phy: migrate QMP USB PHY bindings to qcom,sc8280xp-qmp-usb3-uni-phy.yaml   Krzysztof Kozlowski
• [PATCH 1/5] dt-bindings: phy: qcom,m31: Add IPQ5018 compatible   Krzysztof Kozlowski
• [PATCH 2/5] dt-bindings: usb: dwc3: Add IPQ5018 compatible   Krzysztof Kozlowski
• [PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes   Krzysztof Kozlowski
• [PATCH 5/5] arm64: dts: qcom: ipq5018: Enable USB   Krzysztof Kozlowski
• [PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes   Krzysztof Kozlowski
• [PATCH v1 1/3] dt-bindings: phy: Add i.MX8QM PCIe PHY binding   Krzysztof Kozlowski
• [PATCH v1 2/3] dt-bindings: phy: phy-imx8-pcie: Add binding for different usecases of i.MX8QM PCIe PHYs   Krzysztof Kozlowski
• [PATCH 1/9] dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY   Krzysztof Kozlowski
• [PATCH 2/9] phy: qcom: uniphy: Rename ipq4019 USB phy driver to UNIPHY driver   Krzysztof Kozlowski
• [PATCH 3/9] phy: qcom: uniphy: Update UNIPHY driver to be a common driver   Krzysztof Kozlowski
• [PATCH 4/9] dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY   Krzysztof Kozlowski
• [PATCH 5/9] dt-bindings: usb: dwc3: Update IPQ5332 compatible   Krzysztof Kozlowski
• [PATCH 6/9] arm64: dts: qcom: ipq5332: Add USB3 related nodes   Krzysztof Kozlowski
• [PATCH 7/9] arm64: dts: qcom: ipq5332: Enable USB SS UNIPHY   Krzysztof Kozlowski
• [PATCH 9/9] arm64: defconfig: Enable UNIPHY driver   Krzysztof Kozlowski
• [PATCH 0/9] Enable USB3 for IPQ5332   Krzysztof Kozlowski
• [PATCH 4/9] dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY   Krzysztof Kozlowski
• [PATCH 01/31] dt-bindings: mfd: syscon: Add rockchip,rk3128-qos compatible   Krzysztof Kozlowski
• [PATCH 02/31] dt-bindings: gpu: mali-utgard: Add Rockchip RK3128 compatible   Krzysztof Kozlowski
• [PATCH 03/31] dt-bindings: ASoC: rockchip: Add compatible for RK3128 spdif   Krzysztof Kozlowski
• [PATCH 04/31] dt-bindings: arm: rockchip: Add Geniatech XPI-3128   Krzysztof Kozlowski
• [PATCH 15/31] ARM: dts: rockchip: Split RK3128 devictree for RK312x SoC family   Krzysztof Kozlowski
• [PATCH 16/31] ARM: dts: rockchip: Add SRAM node for RK312x   Krzysztof Kozlowski
• [PATCH 17/31] ARM: dts: rockchip: Add CPU resets for RK312x   Krzysztof Kozlowski
• [PATCH 05/31] clk: rockchip: rk3128: Fix aclk_peri_src parent   Krzysztof Kozlowski
• [PATCH v1 1/3] dt-bindings: phy: Add i.MX8QM PCIe PHY binding   Krzysztof Kozlowski
• [PATCH v4 3/3] usb: typec: nb7vpq904m: switch to DRM_AUX_BRIDGE   Greg Kroah-Hartman
• [PATCH] phy: realtek: usb: Fix the NULL vs IS_ERR() bug for debugfs_create_dir()   Greg Kroah-Hartman
• [PATCH v3 3/3] usb: typec: nb7vpq904m: switch to DRM_SIMPLE_BRIDGE   Heikki Krogerus
• [PATCH AUTOSEL 6.4 02/54] phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspend   Sasha Levin
• [PATCH AUTOSEL 6.4 03/54] phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error code   Sasha Levin
• [PATCH AUTOSEL 6.1 01/47] phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspend   Sasha Levin
• [PATCH AUTOSEL 6.1 02/47] phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error code   Sasha Levin
• [PATCH AUTOSEL 5.15 01/31] phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspend   Sasha Levin
• [PATCH AUTOSEL 5.15 02/31] phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error code   Sasha Levin
• [PATCH AUTOSEL 5.10 01/25] phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspend   Sasha Levin
• [PATCH AUTOSEL 5.10 02/25] phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error code   Sasha Levin
• [RFC PATCH net-next 8/8] dt-bindings: net: fsl,backplane-anlt: new binding document   Andrew Lunn
• [RFC PATCH net-next 8/8] dt-bindings: net: fsl,backplane-anlt: new binding document   Andrew Lunn
• [RFC PATCH net-next 8/8] dt-bindings: net: fsl,backplane-anlt: new binding document   Andrew Lunn
• [PATCH v7 0/5] Enable IPQ5332 USB2   Varadarajan Narayanan
• [PATCH v7 1/5] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy   Varadarajan Narayanan
• [PATCH v7 2/5] phy: qcom-m31: Introduce qcom,m31 USB phy driver   Varadarajan Narayanan
• [PATCH v7 3/5] arm64: dts: qcom: ipq5332: Add USB related nodes   Varadarajan Narayanan
• [PATCH v7 4/5] arm64: dts: qcom: ipq5332: Enable USB   Varadarajan Narayanan
• [PATCH v7 5/5] arm64: defconfig: Enable M31 USB phy driver   Varadarajan Narayanan
• [PATCH v8 0/5] Enable IPQ5332 USB2   Varadarajan Narayanan
• [PATCH v8 1/5] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy   Varadarajan Narayanan
• [PATCH v8 2/5] phy: qcom: Introduce M31 USB PHY driver   Varadarajan Narayanan
• [PATCH v8 3/5] arm64: dts: qcom: ipq5332: Add USB related nodes   Varadarajan Narayanan
• [PATCH v8 4/5] arm64: dts: qcom: ipq5332: Enable USB   Varadarajan Narayanan
• [PATCH v8 5/5] arm64: defconfig: Enable M31 USB phy driver   Varadarajan Narayanan
• [PATCH v7 2/5] phy: qcom-m31: Introduce qcom,m31 USB phy driver   Varadarajan Narayanan
• [PATCH v9 0/4] Enable IPQ5332 USB2   Varadarajan Narayanan
• [PATCH v9 1/4] phy: qcom: m31: Fix indentation issues   Varadarajan Narayanan
• [PATCH v9 2/4] arm64: dts: qcom: ipq5332: Add USB related nodes   Varadarajan Narayanan
• [PATCH v9 3/4] arm64: dts: qcom: ipq5332: Enable USB   Varadarajan Narayanan
• [PATCH v9 4/4] arm64: defconfig: Enable M31 USB phy driver   Varadarajan Narayanan
• [PATCH v9 2/4] arm64: dts: qcom: ipq5332: Add USB related nodes   Varadarajan Narayanan
• [PATCH -next] phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()   Varadarajan Narayanan
• [PATCH -next] phy: qcom: phy-qcom-m31: change m31_ipq5332_regs to static   Varadarajan Narayanan
• [PATCH v10 0/4] Enable IPQ5332 USB2   Varadarajan Narayanan
• [PATCH v10 1/4] phy: qcom: m31: Fix indentation issues   Varadarajan Narayanan
• [PATCH v10 2/4] arm64: dts: qcom: ipq5332: Add USB related nodes   Varadarajan Narayanan
• [PATCH v10 3/4] arm64: dts: qcom: ipq5332: Enable USB   Varadarajan Narayanan
• [PATCH v10 4/4] arm64: defconfig: Enable M31 USB phy driver   Varadarajan Narayanan
• [PATCH v11 0/4] Enable IPQ5332 USB2   Varadarajan Narayanan
• [PATCH v11 1/4] phy: qcom: m31: Fix indentation issues   Varadarajan Narayanan
• [PATCH v11 2/4] arm64: dts: qcom: ipq5332: Add USB related nodes   Varadarajan Narayanan
• [PATCH v11 3/4] arm64: dts: qcom: ipq5332: Enable USB   Varadarajan Narayanan
• [PATCH v11 4/4] arm64: defconfig: Enable M31 USB phy driver   Varadarajan Narayanan
• [PATCH v12 0/4] Enable IPQ5332 USB2   Varadarajan Narayanan
• [PATCH v12 1/4] phy: qcom: m31: Fix indentation issues   Varadarajan Narayanan
• [PATCH v12 2/4] arm64: dts: qcom: ipq5332: Add USB related nodes   Varadarajan Narayanan
• [PATCH v12 3/4] arm64: dts: qcom: ipq5332: Enable USB   Varadarajan Narayanan
• [PATCH v12 4/4] arm64: defconfig: Enable M31 USB phy driver   Varadarajan Narayanan
• [PATCH v11 2/4] arm64: dts: qcom: ipq5332: Add USB related nodes   Varadarajan Narayanan
• [PATCH 0/2] phy: qcom-qmp-usb: fix initialization of PCS_USB   Bryan O'Donoghue
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Vladimir Oltean
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Vladimir Oltean
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Vladimir Oltean
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Vladimir Oltean
• [RFC PATCH net-next 0/8] Add C72/C73 copper backplane support for LX2160   Vladimir Oltean
• [RFC PATCH net-next 1/8] phy: introduce the phy_check_cdr_lock() function   Vladimir Oltean
• [RFC PATCH net-next 2/8] phy: introduce the PHY_MODE_ETHERNET_PHY mode for phy_set_mode_ext()   Vladimir Oltean
• [RFC PATCH net-next 3/8] phy: xgkr: add configuration interface for copper backplane Ethernet PHYs   Vladimir Oltean
• [RFC PATCH net-next 4/8] net: phy: add C73 base page helpers   Vladimir Oltean
• [RFC PATCH net-next 5/8] net: phy: balance calls to ->suspend() and ->resume()   Vladimir Oltean
• [RFC PATCH net-next 6/8] net: phy: initialize phydev->master_slave_set to MASTER_SLAVE_CFG_UNKNOWN   Vladimir Oltean
• [RFC PATCH net-next 7/8] net: phy: mtip_backplane: add driver for MoreThanIP backplane AN/LT core   Vladimir Oltean
• [RFC PATCH net-next 8/8] dt-bindings: net: fsl,backplane-anlt: new binding document   Vladimir Oltean
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Vladimir Oltean
• [RFC PATCH net-next 2/8] phy: introduce the PHY_MODE_ETHERNET_PHY mode for phy_set_mode_ext()   Vladimir Oltean
• [RFC PATCH net-next 2/8] phy: introduce the PHY_MODE_ETHERNET_PHY mode for phy_set_mode_ext()   Vladimir Oltean
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Vladimir Oltean
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Vladimir Oltean
• [RFC PATCH net-next 8/8] dt-bindings: net: fsl,backplane-anlt: new binding document   Vladimir Oltean
• [RFC PATCH net-next 8/8] dt-bindings: net: fsl,backplane-anlt: new binding document   Vladimir Oltean
• [RFC PATCH net-next 8/8] dt-bindings: net: fsl,backplane-anlt: new binding document   Vladimir Oltean
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Vladimir Oltean
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Vladimir Oltean
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Vladimir Oltean
• [PATCH v4 0/3] drm: simplify support for transparent DRM bridges   Laurent Pinchart
• [PATCH v4 0/3] drm: simplify support for transparent DRM bridges   Laurent Pinchart
• [PATCH 0/8] arm64: exynos: Enable USB for E850-96 board   Sam Protsenko
• [PATCH 1/8] dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support   Sam Protsenko
• [PATCH 2/8] dt-bindings: phy: samsung,usb3-drd-phy: Add Exynos850 support   Sam Protsenko
• [PATCH 3/8] usb: dwc3: exynos: Add support for Exynos850 variant   Sam Protsenko
• [PATCH 4/8] phy: exynos5-usbdrd: Make it possible to pass custom phy ops   Sam Protsenko
• [PATCH 5/8] phy: exynos5-usbdrd: Add 26MHz ref clk support   Sam Protsenko
• [PATCH 6/8] phy: exynos5-usbdrd: Add Exynos850 support   Sam Protsenko
• [PATCH 7/8] arm64: dts: exynos: Enable USB in Exynos850   Sam Protsenko
• [PATCH 8/8] arm64: dts: exynos: Enable USB support on E850-96 board   Sam Protsenko
• [PATCH V1 0/2] Add Phy Configuration support for SC7280   Nitin Rawat
• [PATCH V1 1/2] dt-bindings: phy: Add QMP UFS PHY comptible for SC7280   Nitin Rawat
• [PATCH V1 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280   Nitin Rawat
• [PATCH V2 0/2] Add Phy Configuration support for SC7280   Nitin Rawat
• [PATCH V2 1/2] dt-bindings: phy: Add QMP UFS PHY comptible for SC7280   Nitin Rawat
• [PATCH V2 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280   Nitin Rawat
• [PATCH V1 1/2] dt-bindings: phy: Add QMP UFS PHY comptible for SC7280   Nitin Rawat
• [PATCH V1 1/2] dt-bindings: phy: Add QMP UFS PHY comptible for SC7280   Nitin Rawat
• [PATCH V2 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280   Nitin Rawat
• [PATCH V3 0/2] Add Phy Configuration support for SC7280   Nitin Rawat
• [PATCH V3 1/2] dt-bindings: phy: Add QMP UFS PHY comptible for SC7280   Nitin Rawat
• [PATCH V3 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280   Nitin Rawat
• [PATCH] phy: realtek: usb: Fix the NULL vs IS_ERR() bug for debugfs_create_dir()   Jinjie Ruan
• [PATCH v4 02/11] dt-bindings: treewide: add feature-domains description   Wolfram Sang
• [PATCH 0/5] Enable IPQ5018 USB2 support   Nitheesh Sekar
• [PATCH 1/5] dt-bindings: phy: qcom,m31: Add IPQ5018 compatible   Nitheesh Sekar
• [PATCH 2/5] dt-bindings: usb: dwc3: Add IPQ5018 compatible   Nitheesh Sekar
• [PATCH 3/5] phy: qcom-m31: Add compatible, phy init sequence for IPQ5018   Nitheesh Sekar
• [PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes   Nitheesh Sekar
• [PATCH 5/5] arm64: dts: qcom: ipq5018: Enable USB   Nitheesh Sekar
• [PATCH 2/5] dt-bindings: usb: dwc3: Add IPQ5018 compatible   Nitheesh Sekar
• [PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes   Nitheesh Sekar
• [PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes   Nitheesh Sekar
• [PATCH 5/5] arm64: dts: qcom: ipq5018: Enable USB   Nitheesh Sekar
• [PATCH V2 0/4] Enable IPQ5018 USB2 support   Nitheesh Sekar
• [PATCH V2 1/4] dt-bindings: phy: qcom,m31: Add IPQ5018 compatible   Nitheesh Sekar
• [PATCH V2 2/4] phy: qcom-m31: Add compatible, phy init sequence for IPQ5018   Nitheesh Sekar
• [PATCH V2 3/4] arm64: dts: qcom: ipq5018: Add USB related nodes   Nitheesh Sekar
• [PATCH V2 4/4] arm64: dts: qcom: ipq5018: Enable USB   Nitheesh Sekar
• [PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes   Nitheesh Sekar
• [PATCH 5/5] arm64: dts: qcom: ipq5018: Enable USB   Nitheesh Sekar
• [PATCH V2 3/4] arm64: dts: qcom: ipq5018: Add USB related nodes   Nitheesh Sekar
• [PATCH] clk: Annotate struct clk_hw_onecell_data with __counted_by   Gustavo A. R. Silva
• [PATCH 1/1] phy: fsl-imx8mq-usb: add dev_err_probe if getting vbus failed   Alexander Stein
• [PATCH v2 1/1] phy: fsl-imx8mq-usb: add dev_err_probe if getting vbus failed   Alexander Stein
• [PATCH 0/2] phy: qcom-qmp-usb: fix initialization of PCS_USB   Adrien Thierry
• [PATCH 1/2] phy: qcom-qmp-usb: initialize PCS_USB registers   Adrien Thierry
• [PATCH 2/2] phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775p   Adrien Thierry
• [PATCH 0/2] phy: qcom-qmp-usb: fix initialization of PCS_USB   Adrien Thierry
• [PATCH v2 0/2] phy: qcom-qmp-usb: fix initialization of PCS_USB   Adrien Thierry
• [PATCH v2 1/2] phy: qcom-qmp-usb: initialize PCS_USB registers   Adrien Thierry
• [PATCH v2 2/2] phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775p   Adrien Thierry
• [PATCH] phy: realtek: Realtek PHYs should depend on ARCH_REALTEK   Geert Uytterhoeven
• [PATCH] phy: realtek: Realtek PHYs should depend on ARCH_REALTEK   Geert Uytterhoeven
• [PATCH -next] phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()   Yang Yingliang
• [PATCH -next] phy: qcom: phy-qcom-m31: change m31_ipq5332_regs to static   Yang Yingliang
• [PATCH v8 0/7] Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ   Sandor Yu
• [PATCH v8 1/7] drm: bridge: Cadence: convert mailbox functions to macro functions   Sandor Yu
• [PATCH v8 2/7] phy: Add HDMI configuration options   Sandor Yu
• [PATCH v8 3/7] dt-bindings: display: bridge: Add Cadence MHDP850   Sandor Yu
• [PATCH v8 4/7] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver   Sandor Yu
• [PATCH v8 5/7] dt-bindings: phy: Add Freescale iMX8MQ DP and HDMI PHY   Sandor Yu
• [PATCH v8 6/7] phy: freescale: Add DisplayPort PHY driver for i.MX8MQ   Sandor Yu
• [PATCH v8 7/7] phy: freescale: Add HDMI PHY driver for i.MX8MQ   Sandor Yu
• [PATCH v1 1/3] dt-bindings: phy: Add i.MX8QM PCIe PHY binding   Hongxing Zhu
• [PATCH v1 2/3] dt-bindings: phy: phy-imx8-pcie: Add binding for different usecases of i.MX8QM PCIe PHYs   Hongxing Zhu
• [PATCH v1 1/3] dt-bindings: phy: Add i.MX8QM PCIe PHY binding   Hongxing Zhu
• [PATCH v1 0/3] Add i.MX8Q PCIe PHY driver   Richard Zhu
• [PATCH v1 1/3] dt-bindings: phy: Add i.MX8QM PCIe PHY binding   Richard Zhu
• [PATCH v1 2/3] dt-bindings: phy: phy-imx8-pcie: Add binding for different usecases of i.MX8QM PCIe PHYs   Richard Zhu
• [PATCH v1 3/3] phy: freescale: imx8q-pcie: Add i.MX8Q PCIe PHY driver   Richard Zhu
• [PATCH v3 1/3] drm/display: add transparent bridge helper   kernel test robot
• [PATCH v3 3/3] usb: typec: nb7vpq904m: switch to DRM_SIMPLE_BRIDGE   kernel test robot

Last message date: Thu Aug 31 13:40:39 PDT 2023
Archived on: Thu Aug 31 13:40:48 PDT 2023

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...