[PATCH RESEND v2 9/9] arm64: dts: qcom: sdx75-idp: Add regulator nodes
Rohit Agarwal
quic_rohiagar at quicinc.com
Mon Aug 7 06:38:54 PDT 2023
Add all the regulators along with labels found on SDX75 IDP.
Signed-off-by: Rohit Agarwal <quic_rohiagar at quicinc.com>
---
arch/arm64/boot/dts/qcom/sdx75-idp.dts | 227 +++++++++++++++++++++++++++++++++
1 file changed, 227 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
index 0da8c98..10d1587 100644
--- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
@@ -5,6 +5,7 @@
/dts-v1/;
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sdx75.dtsi"
#include "pm7550ba.dtsi"
#include "pmk8550.dtsi"
@@ -17,6 +18,232 @@
aliases {
serial0 = &uart1;
};
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ vph_ext: vph-ext-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_ext";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ vreg_bob_3p3: pmx75-bob {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_bob_3p3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ vin-supply = <&vph_ext>;
+ };
+};
+
+&apps_rsc {
+ pmx75-rpmh-regulators {
+ compatible = "qcom,pmx75-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-l1-supply = <&vreg_s2b_1p224>;
+ vdd-l2-l18-supply = <&vreg_s2b_1p224>;
+ vdd-l3-supply = <&vreg_s7b_0p936>;
+ vdd-l4-l16-supply = <&vreg_s7b_0p936>;
+ vdd-l5-l6-supply = <&vreg_s4b_1p824>;
+ vdd-l7-supply = <&vreg_s7b_0p936>;
+ vdd-l8-l9-supply = <&vreg_s8b_0p824>;
+ vdd-l10-supply = <&vreg_bob_3p3>;
+ vdd-l11-l13-supply = <&vreg_bob_3p3>;
+ vdd-l12-supply = <&vreg_s2b_1p224>;
+ vdd-l14-supply = <&vreg_s3b_0p752>;
+ vdd-l15-supply = <&vreg_s2b_1p224>;
+ vdd-l17-supply = <&vreg_s8b_0p824>;
+ vdd-l19-supply = <&vreg_s7b_0p936>;
+ vdd-l20-l21-supply = <&vreg_s7b_0p936>;
+
+ vreg_s2b_1p224: smps2 {
+ regulator-name = "vreg_s2b_1p224";
+ regulator-min-microvolt = <1224000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ vreg_s3b_0p752: smps3 {
+ regulator-name = "vreg_s3b_0p752";
+ regulator-min-microvolt = <684000>;
+ regulator-max-microvolt = <904000>;
+ };
+
+ vreg_s4b_1p824: smps4 {
+ regulator-name = "vreg_s4b_1p824";
+ regulator-min-microvolt = <1824000>;
+ regulator-max-microvolt = <1904000>;
+ };
+
+ vreg_s7b_0p936: smps7 {
+ regulator-name = "vreg_s7b_0p936";
+ regulator-min-microvolt = <352000>;
+ regulator-max-microvolt = <1060000>;
+ };
+
+ vreg_s8b_0p824: smps8 {
+ regulator-name = "vreg_s8b_0p824";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ vreg_l1b_1p2: ldo1 {
+ regulator-name = "vreg_l1b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_1p128: ldo2 {
+ regulator-name = "vreg_l2b_1p128";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3b_0p896: ldo3 {
+ regulator-name = "vreg_l3b_0p896";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1040000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b_0p88: ldo4 {
+ regulator-name = "vreg_l4b_0p88";
+ regulator-min-microvolt = <864000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_1p776: ldo5 {
+ regulator-name = "vreg_l5b_1p776";
+ regulator-min-microvolt = <1770000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_0p904: ldo7 {
+ regulator-name = "vreg_l7b_0p904";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_0p8: ldo8 {
+ regulator-name = "vreg_l8b_0p8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_0p752: ldo9 {
+ regulator-name = "vreg_l9b_0p752";
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b_3p08: ldo10 {
+ regulator-name = "vreg_l10b_3p08";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3088000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11b_1p8: ldo11 {
+ regulator-name = "vreg_l11b_1p8";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p2: ldo12 {
+ regulator-name = "vreg_l12b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_1p8: ldo13 {
+ regulator-name = "vreg_l13b_1p8";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_0p624: ldo14 {
+ regulator-name = "vreg_l14b_0p624";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p2: ldo15 {
+ regulator-name = "vreg_l15b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_0p912: ldo16 {
+ regulator-name = "vreg_l16b_0p912";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_0p752: ldo17 {
+ regulator-name = "vreg_l17b_0p752";
+ regulator-min-microvolt = <684000>;
+ regulator-max-microvolt = <957600>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l19b_0p952: ldo19 {
+ regulator-name = "vreg_l19b_0p952";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l20b_0p912: ldo20 {
+ regulator-name = "vreg_l20b_0p912";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <952000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l21b_0p856: ldo21 {
+ regulator-name = "vreg_l21b_0p856";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
};
&chosen {
--
2.7.4
More information about the linux-phy
mailing list