[PATCH v3 09/18] arm64: dts: qcom: ipq8074: switch PCIe QMP PHY to new style of bindings

[Dmitry Baryshkov]

Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 67 +++++++++++----------------
 1 file changed, 28 insertions(+), 39 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 00ed71936b47..3350804a2f62 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -211,59 +211,48 @@ qusb_phy_0: phy at 79000 {
 
 		pcie_qmp0: phy at 84000 {
 			compatible = "qcom,ipq8074-qmp-gen3-pcie-phy";
-			reg = <0x00084000 0x1bc>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00084000 0x1000>;
 
 			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
-				<&gcc GCC_PCIE0_AHB_CLK>;
-			clock-names = "aux", "cfg_ahb";
+				 <&gcc GCC_PCIE0_AHB_CLK>,
+				 <&gcc GCC_PCIE0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "pipe";
+
+			clock-output-names = "pcie20_phy0_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
+
 			resets = <&gcc GCC_PCIE0_PHY_BCR>,
-				<&gcc GCC_PCIE0PHY_PHY_BCR>;
+				 <&gcc GCC_PCIE0PHY_PHY_BCR>;
 			reset-names = "phy",
 				      "common";
 			status = "disabled";
-
-			pcie_phy0: phy at 84200 {
-				reg = <0x84200 0x16c>,
-				      <0x84400 0x200>,
-				      <0x84800 0x1f0>,
-				      <0x84c00 0xf4>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "pcie20_phy0_pipe_clk";
-			};
 		};
 
 		pcie_qmp1: phy at 8e000 {
 			compatible = "qcom,ipq8074-qmp-pcie-phy";
-			reg = <0x0008e000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x0008e000 0x1000>;
 
 			clocks = <&gcc GCC_PCIE1_AUX_CLK>,
-				<&gcc GCC_PCIE1_AHB_CLK>;
-			clock-names = "aux", "cfg_ahb";
+				 <&gcc GCC_PCIE1_AHB_CLK>,
+				 <&gcc GCC_PCIE1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "pipe";
+
+			clock-output-names = "pcie20_phy1_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
+
 			resets = <&gcc GCC_PCIE1_PHY_BCR>,
-				<&gcc GCC_PCIE1PHY_PHY_BCR>;
+				 <&gcc GCC_PCIE1PHY_PHY_BCR>;
 			reset-names = "phy",
 				      "common";
 			status = "disabled";
-
-			pcie_phy1: phy at 8e200 {
-				reg = <0x8e200 0x130>,
-				      <0x8e400 0x200>,
-				      <0x8e800 0x1f8>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "pcie20_phy1_pipe_clk";
-			};
 		};
 
 		mdio: mdio at 90000 {
@@ -807,7 +796,7 @@ pcie1: pci at 10000000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			phys = <&pcie_phy1>;
+			phys = <&pcie_qmp1>;
 			phy-names = "pciephy";
 
 			ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>,   /* I/O */
@@ -869,7 +858,7 @@ pcie0: pci at 20000000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			phys = <&pcie_phy0>;
+			phys = <&pcie_qmp0>;
 			phy-names = "pciephy";
 
 			ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>,   /* I/O */
-- 
2.39.2