[PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes

[Krzysztof Kozlowski]

On 25/08/2023 11:35, Nitheesh Sekar wrote:
> Add USB phy and controller nodes.
> 
> Co-developed-by: Amandeep Singh <quic_amansing at quicinc.com>
> Signed-off-by: Amandeep Singh <quic_amansing at quicinc.com>
> Signed-off-by: Nitheesh Sekar <quic_nsekar at quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/ipq5018.dtsi | 54 +++++++++++++++++++++++++++
>  1 file changed, 54 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> index 9f13d2dcdfd5..ff477923a823 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> @@ -238,6 +238,60 @@
>  				status = "disabled";
>  			};
>  		};
> +
> +		usbphy0: phy at 5b000 {
> +			compatible = "qcom,ipq5018-usb-hsphy";
> +			reg = <0x0005b000 0x120>;
> +
> +			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
> +
> +			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
> +
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
> +		usb: usb2 at 8a00000 {

Eee, where did you put these? Don't stuff things to the end of any list.
This applies to your entire code: Makefile, Kconfig, .c, .h, .dts, .dtsi
and other languages and projects as well.

Krzysztof