[PATCH v7 1/5] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy

[Rob Herring]

On Thu, 10 Aug 2023 15:26:04 +0530, Varadarajan Narayanan wrote:
> Document the M31 USB2 phy present in IPQ5332.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> Co-developed-by: Sricharan Ramabadhran <quic_srichara at quicinc.com>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara at quicinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
> ---
> v7:
> 	Move 'compatible' to be the first entry
> 	In the example have 'usb-phy' instead of 'usb2-phy'
> 	Add 'Reviewed-by: Krzysztof Kozlowski'
> 	'make dt_binding_check DT_SCHEMA_FILES=qcom,ipq5332-usb-hsphy.yaml' passed
> 	'make CHECK_DTBS=y DT_SCHEMA_FILES=qcom,ipq5332-usb-hsphy.yaml dtbs_check' passed
> v6:
> 	Add 'Co-developed-by: Sricharan'
> 	Add 'const' to compatible, vdd-supply
> 	Remove label and use usb2-phy for nodename in the example
> v5:
> 	Add '#phy-cells', to be able to use generic phy
> 	Remove 'Reviewed-by: Krzysztof Kozlowski' due to above change
> v4:
> 	Move M31 URL to description
> 	Remove maxItems and relevant content from clock-names
> 	Change node name to generic name
> 	'make dt_binding_check DT_SCHEMA_FILES=qcom' passed
> v3:
> 	Incorporate review comments. Will bring in ipq5018 compatible
> 	string while posting ipq5018 usb patchset.
> 
> v1:
> 	Rename qcom,m31.yaml -> qcom,ipq5332-usb-hsphy.yaml
> 	Drop default binding "m31,usb-hsphy"
> 	Add clock
> 	Remove 'oneOf' from compatible
> 	Remove 'qscratch' region from register space as it is not needed
> 	Remove reset-names
> 	Fix the example definition
> ---
>  .../bindings/phy/qcom,ipq5332-usb-hsphy.yaml       | 59 ++++++++++++++++++++++
>  1 file changed, 59 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-hsphy.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/0d42f556ab28123b2b508521a0c79c7597b8b0fd.1691660905.git.quic_varada@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.