[PATCH v2 0/9] Add pmics supported in Qualcomm's SDX75 platform

[Rohit Agarwal]

On 8/7/2023 5:48 PM, Rohit Agarwal wrote:
> Hi,
>
> Changes in v2:
>   - Added compatible for pm7550ba for eusb2 repeater and used it in DT.
>   - Addressed some minor comments from Konrad to add fixes tag, labels
>     and update the labels
>
> This series add support of pmics that are found in SDX75 platform and
> add the corresponding regulators in the IDP platform as well.
> It also parallely updates the pmic found in SDX65 to PM7250b and add pinctrl
> support for the same pmic chip.
> This series is based on the new header inclusion[1] and movement of the
> regulators level from rpmpd to rpmhpd[2].
> This series can be picked after successfully picking [2] and [3] as [1] has
> already been applied.
>
> [1] https://lore.kernel.org/all/1689744162-9421-1-git-send-email-quic_rohiagar@quicinc.com/
> [2] https://lore.kernel.org/all/1690781104-2290-1-git-send-email-quic_rohiagar@quicinc.com/
> [3] https://lore.kernel.org/all/1690461813-22564-1-git-send-email-quic_rohiagar@quicinc.com/
>
> Thanks,
> Rohit.
Sorry for the spam please ignore this. Will resend version 2.

Thanks,
Rohit.
>
> Rohit Agarwal (9):
>    dt-bindings: phy: qcom,snps-eusb2-repeater: Add compatible for
>      PM7550BA
>    arm64: dts: qcom: sdx75: Add spmi node
>    arm64: dts: qcom: Add pinctrl gpio support for pm7250b
>    arm64: dts: qcom: Add pm7550ba PMIC dtsi
>    arm64: dts: qcom: Add pmx75 PMIC dtsi
>    ARM: dts: qcom: sdx65-mtp: Update the pmic used in sdx65
>    arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75
>    arm64: dts: qcom: sdx75: Add rpmhpd node
>    arm64: dts: qcom: sdx75-idp: Add regulator nodes
>
>   .../bindings/phy/qcom,snps-eusb2-repeater.yaml     |   7 +-
>   arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts          |   2 +-
>   arch/arm64/boot/dts/qcom/pm7250b.dtsi              |  10 +
>   arch/arm64/boot/dts/qcom/pm7550ba.dtsi             |  70 +++++++
>   arch/arm64/boot/dts/qcom/pmx75.dtsi                |  64 ++++++
>   arch/arm64/boot/dts/qcom/sdx75-idp.dts             | 230 +++++++++++++++++++++
>   arch/arm64/boot/dts/qcom/sdx75.dtsi                |  74 +++++++
>   7 files changed, 455 insertions(+), 2 deletions(-)
>   create mode 100644 arch/arm64/boot/dts/qcom/pm7550ba.dtsi
>   create mode 100644 arch/arm64/boot/dts/qcom/pmx75.dtsi
>