[PATCH v11 2/4] arm64: dts: qcom: ipq5332: Add USB related nodes

[Dmitry Baryshkov]

On Thu, 31 Aug 2023 at 08:39, Varadarajan Narayanan
<quic_varada at quicinc.com> wrote:
>
> Add USB phy and controller nodes.
>
> Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
> ---
> v10:
>         usb at 8a00000 -> usb at 8af8800
>         "make W=1 ARCH=arm64 -j 16 CHECK_DTBS=y DT_SCHEMA_FILES=qcom,ipq5332-usb-hsphy.yaml dtbs_check" passed
> v9:
>         usb2 at 8a00000 -> usb at 8a00000
>         "make ARCH=arm64 -j 16 CHECK_DTBS=y DT_SCHEMA_FILES=qcom,ipq5332-usb-hsphy.yaml dtbs_check" passed
> v6:
>         Remove clock names
>         Move the nodes to address sorted location
> v5:
>         Use generic phy instead of usb-phy
>         'make CHECK_DTBS=y DT_SCHEMA_FILES=qcom dtbs_check' passed
>         'DT_CHECKER_FLAGS='-v -m' DT_SCHEMA_FILES=qcom dt_binding_check' passed
> v4:
>         Change node name
>         Remove blank line
>         'make CHECK_DTBS=y DT_SCHEMA_FILES=qcom qcom/ipq5332-rdp441.dtb' passed
> v1:
>         Rename phy node
>         Change compatible from m31,ipq5332-usb-hsphy -> qcom,ipq5332-usb-hsphy
>         Remove 'qscratch' from phy node
>         Fix alignment and upper-case hex no.s
>         Add clock definition for the phy
>         Remove snps,ref-clock-period-ns as it is not used. dwc3_ref_clk_period()
>         in dwc3/core.c takes the frequency from ref clock and calculates fladj
>         as appropriate.
> ---
>  arch/arm64/boot/dts/qcom/ipq5332.dtsi | 55 +++++++++++++++++++++++++++++++++++
>  1 file changed, 55 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> index 8bfc2db..6593865 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> @@ -145,6 +145,19 @@
>                 #size-cells = <1>;
>                 ranges = <0 0 0 0xffffffff>;
>
> +               usbphy0: phy at 7b000 {
> +                       compatible = "qcom,ipq5332-usb-hsphy";
> +                       reg = <0x0007b000 0x12c>;
> +
> +                       clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
> +
> +                       resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
> +
> +                       #phy-cells = <0>;
> +
> +                       status = "disabled";
> +               };
> +
>                 qfprom: efuse at a4000 {
>                         compatible = "qcom,ipq5332-qfprom", "qcom,qfprom";
>                         reg = <0x000a4000 0x721>;
> @@ -290,6 +303,48 @@
>                         status = "disabled";
>                 };
>
> +               usb: usb at 8af8800 {
> +                       compatible = "qcom,ipq5332-dwc3", "qcom,dwc3";
> +                       reg = <0x08af8800 0x400>;
> +
> +                       interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "hs_phy_irq";
> +
> +                       clocks = <&gcc GCC_USB0_MASTER_CLK>,
> +                                <&gcc GCC_SNOC_USB_CLK>,
> +                                <&gcc GCC_USB0_SLEEP_CLK>,
> +                                <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> +                       clock-names = "core",
> +                                     "iface",
> +                                     "sleep",
> +                                     "mock_utmi";
> +
> +                       resets = <&gcc GCC_USB_BCR>;
> +
> +                       qcom,select-utmi-as-pipe-clk;
> +
> +                       #address-cells = <1>;
> +                       #size-cells = <1>;
> +                       ranges;
> +
> +                       status = "disabled";
> +
> +                       usb2_0_dwc: usb at 8a00000 {

Since we have just seen a patch series adding USB 3 support to
ipq5332, we know that the host is not 2.0-only. Thus the `2_0` part of
the label doesn't make sense.

Could you please change the label to be just usb_dwc (or usb0_dwc)?

> +                               compatible = "snps,dwc3";
> +                               reg = <0x08a00000 0xe000>;
> +                               clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> +                               clock-names = "ref";
> +                               interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
> +                               phy-names = "usb2-phy";
> +                               phys = <&usbphy0>;
> +                               tx-fifo-resize;
> +                               snps,is-utmi-l1-suspend;
> +                               snps,hird-threshold = /bits/ 8 <0x0>;
> +                               snps,dis_u2_susphy_quirk;
> +                               snps,dis_u3_susphy_quirk;
> +                       };
> +               };
> +
>                 intc: interrupt-controller at b000000 {
>                         compatible = "qcom,msm-qgic2";
>                         reg = <0x0b000000 0x1000>,      /* GICD */
> --
> 2.7.4
>


-- 
With best wishes
Dmitry