[PATCH 4/9] dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY

[Rob Herring]

On Tue, Aug 29, 2023 at 07:28:13PM +0530, Praveenkumar I wrote:
> Add ipq5332 USB3 SS UNIPHY support.
> 
> Signed-off-by: Praveenkumar I <quic_ipkumar at quicinc.com>
> ---
>  .../devicetree/bindings/phy/qcom,uniphy.yaml  | 117 +++++++++++++++++-
>  1 file changed, 114 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,uniphy.yaml b/Documentation/devicetree/bindings/phy/qcom,uniphy.yaml
> index cbe2cc820009..17ba661b3d9b 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,uniphy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,uniphy.yaml
> @@ -19,21 +19,53 @@ properties:
>      enum:
>        - qcom,usb-ss-ipq4019-phy
>        - qcom,usb-hs-ipq4019-phy
> +      - qcom,ipq5332-usb-ssphy
>  
>    reg:
>      maxItems: 1
>  
> +  reg-names:
> +    items:
> +      - const: phy_base
> +
> +  clocks:
> +    maxItems: 3
> +
> +  clock-names:
> +    maxItems: 3
> +
> +  "#clock-cells":
> +    const: 0
> +
>    resets:
> +    minItems: 1
>      maxItems: 2
>  
>    reset-names:
> -    items:
> -      - const: por_rst
> -      - const: srif_rst

No need to remove this and duplicate the names multiple times. Just add 
'minItems: 1' here and then the if/then schemas only need either 
minItems or maxItems.

> +    minItems: 1
> +    maxItems: 2
> +
> +  clock-output-names:
> +    maxItems: 1
>  
>    "#phy-cells":
>      const: 0
>  
> +  qcom,phy-mux-sel:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description:
> +      PHY Mux Selection for used to select which interface is going to use the
> +      combo PHY.
> +    items:
> +      - items:
> +          - description: phandle to TCSR syscon region
> +          - description: offset to the PHY Mux selection register
> +          - description: value to write on the PHY Mux selection register
> +
> +  vdd-supply:
> +    description:
> +      Phandle to 5V regulator supply to PHY digital circuit.
> +
>  required:
>    - compatible
>    - reg
> @@ -41,6 +73,68 @@ required:
>    - reset-names
>    - "#phy-cells"
>  
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,ipq5332-usb-ssphy
> +    then:
> +      properties:
> +        clocks:
> +          maxItems: 3
> +        clock-names:
> +          items:
> +            - const: pipe
> +            - const: phy_cfg_ahb
> +            - const: phy_ahb

How do the other variants work without any clocks? Magic?

Define the names in the top level and then just set the number of items 
or disallow the property in the if/then schemas.

> +
> +        "#clock-cells":
> +          const: 0
> +
> +        clock-output-names:
> +          maxItems: 1
> +
> +        resets:
> +          maxItems: 1
> +        reset-names:
> +          items:
> +            - const: por_rst
> +
> +        vdda-supply:
> +          description:
> +            Phandle to 5V regulator supply to PHY digital circuit.
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,usb-ss-ipq4019-phy
> +    then:
> +      properties:
> +        resets:
> +          maxItems: 1
> +        reset-names:
> +          items:
> +            - const: por_rst
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,usb-hs-ipq4019-phy
> +    then:
> +      properties:
> +        resets:
> +          maxItems: 2
> +        reset-names:
> +          items:
> +            - const: por_rst
> +            - const: srif_rst
> +
>  additionalProperties: false
>  
>  examples:
> @@ -55,3 +149,20 @@ examples:
>                 <&gcc USB2_HSPHY_S_ARES>;
>        reset-names = "por_rst", "srif_rst";
>      };
> +
> +  - |
> +    #include <dt-bindings/clock/qcom,ipq5332-gcc.h>
> +
> +    ssuniphy at 4b0000 {
> +      #phy-cells = <0>;
> +      #clock-cells = <0>;
> +      compatible = "qcom,ipq5332-usb-ssphy";
> +      reg = <0x4b0000 0x800>;
> +      clocks = <&gcc GCC_USB0_PIPE_CLK>,
> +               <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> +               <&gcc GCC_PCIE3X1_PHY_AHB_CLK>;
> +      clock-names = "pipe", "phy_cfg_ahb", "phy_ahb";
> +
> +      resets = <&gcc GCC_USB0_PHY_BCR>;
> +      reset-names = "por_rst";
> +    };
> -- 
> 2.34.1
>