[PATCH v2 0/9] Add pmics supported in Qualcomm's SDX75 platform

[Rohit Agarwal]

Hi,

Changes in v2:
 - Added compatible for pm7550ba for eusb2 repeater and used it in DT.
 - Addressed some minor comments from Konrad to add fixes tag, labels
   and update the labels

This series add support of pmics that are found in SDX75 platform and
add the corresponding regulators in the IDP platform as well.
It also parallely updates the pmic found in SDX65 to PM7250b and add pinctrl
support for the same pmic chip.
This series is based on the new header inclusion[1] and movement of the
regulators level from rpmpd to rpmhpd[2].
This series can be picked after successfully picking [2] and [3] as [1] has
already been applied.

[1] https://lore.kernel.org/all/1689744162-9421-1-git-send-email-quic_rohiagar@quicinc.com/
[2] https://lore.kernel.org/all/1690781104-2290-1-git-send-email-quic_rohiagar@quicinc.com/
[3] https://lore.kernel.org/all/1690461813-22564-1-git-send-email-quic_rohiagar@quicinc.com/

Thanks,
Rohit.


Rohit Agarwal (9):
  dt-bindings: phy: qcom,snps-eusb2-repeater: Add compatible for
    PM7550BA
  arm64: dts: qcom: sdx75: Add spmi node
  arm64: dts: qcom: Add pinctrl gpio support for pm7250b
  arm64: dts: qcom: Add pm7550ba PMIC dtsi
  arm64: dts: qcom: Add pmx75 PMIC dtsi
  ARM: dts: qcom: sdx65-mtp: Update the pmic used in sdx65
  arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75
  arm64: dts: qcom: sdx75: Add rpmhpd node
  arm64: dts: qcom: sdx75-idp: Add regulator nodes

 .../bindings/phy/qcom,snps-eusb2-repeater.yaml     |   7 +-
 arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts          |   2 +-
 arch/arm64/boot/dts/qcom/pm7250b.dtsi              |  10 +
 arch/arm64/boot/dts/qcom/pm7550ba.dtsi             |  70 +++++++
 arch/arm64/boot/dts/qcom/pmx75.dtsi                |  64 ++++++
 arch/arm64/boot/dts/qcom/sdx75-idp.dts             | 230 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sdx75.dtsi                |  74 +++++++
 7 files changed, 455 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/pm7550ba.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pmx75.dtsi

-- 
2.7.4